Saturday 30 April 2011

Computer Accessories


Advertised as Kodak #10 color/black combo pack. Came loose with weird product numbers. Kodak states they are not sold loose. They may have been OEM light loads, fakes, or the inventory of an out-of-business Chinese factory. Kodak suggested I return them as they would not stand by them. I did.



I'd avoid them Kodak Ink Combo Pack - 1963149

Tried non Kodak ink; and had problems in our Kodak all in one printer. Price one of the more reasonable Ink cartridge's on the market. High quality low price what more do you want. Also very satisfied with the Kodak all in one printer.

I contacted the seller after being unable to calibrate my printer using there cartridge, it would not print all the colors required for calibration. Just today I received my money back(which of course is good)and the seller alleges a receiving email problem for the delay. It is hoped that the email problem has now been fixed.



This is the 1st time I've had any kind of a problem with Kodak ink-jet cartridges. Love the prices on Kodak cartridges.'


Detail Products
Detail Reviews
Click here for more information


Computer Accessories Computer Accessories

Bostitch Finish Nailer - compressor, finish nailer


I purchased this nail gun recently and was pleasantly surprised when I received it. The condition of the nailer was really good, you could tell it wasn't brand new as some slight touch up had been done to the black areas of the paint otherwise, you would be hard pressed to distinguish the gun from a new one. After receiving it, I fired up my compressor and ran about 50 or so nails through it to make sure it worked well and to see how easy it was to adjust the drive depth. I had no problems getting the gun to countersink 2" nails in oak.



Just a heads up, the description lists additional tips and hex wrenches as being included however, I did not receive any and do not see these items listed by other vendors in their description of the item. I suspect this is a minor oversight by Amazon.



I prefer to buy new when possible however, when the price is significantly cheaper, there is a promo code, and the warranty is good, there is no reason not to consider purchasing this gun reconditioned. Factory-Reconditioned Bostitch U/N62FNK-2 1- to 2-1/2-Inch 15-Gauge Angled Finish Nailer

They sent me a heavily used, dirty tool. The box had dirt from the worksite on it. The trigger is loaded with dirt. They did not even try to patch up any of the dings, scratches and scuffs. This looks like it came out of a pawnshop, but worse because it is dirty. I did not even try it to see if it worked, it looked so bad. They did not even pretend to send a factory reconditioned nailer. I am embarrased for this company. Based on the reviews, I suspect this is an anomoly, and that someone who is not greatful to be employed severely cut corners. Only a couple others have had simlar experiences--at least people who have taken the time to post a review. I am sending it back.



I ordered one new from the same company for about $25 more. I received it today and I am pleased. Now I have to waste my time and gas to take the crappy one to UPS because someone did not take pride in their work.



The lesson here is to buy new if you buy from this company. I previously bought a reconditioned compresser and brad nailer from a different company (CPO Bostitch) and it truely was factory conditoned and was beautiful.

The nailer came in the mail 2 days earlier than I expected. It had extra foot covers included in the box, which was nice. The nailer performed flawlessly with the Bostitch brand 2 1/2 inch nails. I did have a minor problem with 1 inch Hitachi brand 1 inch nails...When I held it up to nail into the wall, it misfired about every 5th nail. This was remedied when I aimed it downward towards the ground. I switched to the 1 inch Bostitch nails and didn't have this problem anymore. I suggest using the brand nails for this unit. I have yet to have a misfire with the Bostitch nails. The unit was in perfect condition out of the box. Only some minute indications that it had ever been used. I did have to use my own compressor adapter, as it did not come with one included. Not a problem because I had plenty for just such an occasion. I build a lot of antique reproduction style furniture, and this tool is a must. The 15 gauge nails are strong enough to hold, but thin enough to not split the wood. It leaves a small hole that is easily covered with putty, barely noticeable when finished. All in all a great product at a great price...Well under the price you pay for a substandard brand from the local tool store.

Make sure you buy from a reseller that has a good return policy. I got the full refund without paying returned shipping fee.



I got the really old nailer that look like several year heavy used worn out, missing a box of 1000 sampled nails, no instruction manual, no air fit connector, and a broken case lock clip.



In my case, that is not worthy to save $50.00 compare to a new one. In additional, I have to delay my project in couple weeks.

I purchased this with a Bostitch 6 gallon compressor and 18 gauge brad nailer to do some trim work around the house. Things to note are the gun did not come with a quick connect coupling and be sure to get the 25 degree angled nails. Most other brands use the 30+ degree nails.

The gun works pretty good. Jams once in a while i.e on the last nail in the feeder. Easy to clear them. At 100 PSI I've had no trouble driving in 2 1/2 nails. A lot easier than hand nailing!

Nail gun arrived in perfect condition, almost as if it had never been used. I don't know if they repaint these things or what, but the case, the nail gun, everything was like-new. It also came with a box of 1000 - 2" nails in it which I wasn't expecting. Not sure if that is true for everybody, but I thought it was cool, those are about $20. I've now shot over 3,000 nails with it and only had one minor jam up, on the last nail of the load and it was easy to pull out the nail and move on. It's lightweight and sets the nail perfectly every time. I've used a combination of the Bostich 15 gauge 2.5" and 2" inch nails.

This is the second finish nail gun I have owned. I am so happy with Bostitch and with the CPO company. My nail gun arrived early (as did my 18v lithium ion drill gun from this company). This nail gun has worked flawlessly and has certainly made it easier to install trim work. I found that the nail gun is easy to disassemble if you need to (I didn't, but wanted to see how it would if I had a jammed nail). It is very easy to use and accurately sets nails to the desired depth. I would highly recommend to any do-it-yourself handyman such as I am.

I purchased one of these new about five years ago. I bought it just for around the house projects so it saw very little use - maybe used once every three months to drive twenty nails. Mine went bad about a year after I bought it. It leaks air badly around the trigger. I don't know whether I just bought one that was poorly made or it's just a sorry product to start with. I do know that I will not purchase another, or the Bostich brand. - Bostitch Finish Nailer - Finish Nailer - Nailer - Compressor'


Detail Products
Detail Reviews
Click here for more information


Bostitch Finish Nailer - compressor, finish nailer compressor Bostitch Finish Nailer - compressor, finish nailer

Samsung Intensity - samsung car charger, charger


I needed a car charger for my new cell phone but did not want to pay the $30 the Verizon store wanted for it.



I came to Amazon.com looking for a better deal and here I found it. This product was so inexpensive, I was worried about whether it would work or not. I bought two - one for me, one for my hubby...and both are working perfectly.



They arrived quickly and in perfect condition, just as they look in the photo posted on the product information page. The only thing I don't know is how long it will last, because I have only used it a few times. But at this price, even if it lasted 6 months, it would be worth it (not that I want that; the waste in this world is already great enough!).



I would buy something from this vendor again.



This time, it WASN'T "too good to be true"! Cell Phone Car Charger for Samsung Intensity SCH-u450

If you plug this item into the charger port in your car you must manipulate it until the small red light indicating current is passing through it lights up. The contacts are inferior and it requires manipulating. If this is necessary when it is new, I'm wondering how long this item lasts. Other chargers require simply plugging them in. - Cell Phone Accessories - Samsung Car Charger - Samsung Intensity - Charger'


Detail Products
Detail Reviews
Click here for more information


Hdmi Switcher - hd dvd, hdtv


I thought this would be the perfect solution. I have the hi-def signal coming out of my HD DVR via HDMI and going into my Onkyo receiver. Before the splitter, I had to have the receiver on anytime I wanted to watch TV (pass-through only worked when receiver was on). With the splitter I had hoped to be able to pass the HD signal directly to the TV and then only use the audio through the receiver for sports, movies, etc.



The signal coming through the splitter was too weak to be able to be picked up by my Samsung HDTV. I figured this was a $16 gamble that was worth the shot, but unfortunately the splitter did not provide the two full-strength signals I required. (It did provide one signal that worked well enough to be picked up by the TV or the receiver, but not two.) HDMI Splitter (1 to 2) Premium Splitter Cable

Do not buy this splitter if you are trying to split a single HDMI source to 2 HDMI displays. It doesn't work, even though that is precisely what it is supposed to do. I tried connecting 2 Samsung TV's(LN37A550 & LN19A450) to a Motorola HD cable box(DCH3200) and it doesn't work. If you plug one display into the splitter that TV works, but when you try to plug-in both displays, neither works. I purchased two of these splitters and neither worked, so I doubt it was just a case of having been shipped a defective unit.



This splitter is a piece of junk. Don't waste your money. Amazon should be ashamed of offering this product on their web site and it should be removed immediately.

This splitter reduced my signal quality to where I was getting bright green spots all over the image after it was attached. I though it may be due to my source signal quality, so I hooked it up to my friend's Direct TV box and we experienced the same thing. It's useless. I just completely wasted my money. I hate that feeling.

Splitting the digital cable HDMI port to two powerd on TVs resulted in an "HDMI intrusion" error from the box. The error remained in the foreground covering most of the screen but there was a good picture behind the error screen on both TVs. Splitting the HDMI connection from the DVD player to two powered on TVs resulted in a good display on one TV and poor display on the other (Wavey Lines). The splitter would work well for using only one display powered on at a time.

For many others that want to use two sources and feed to one TV or monitor this will not work...

However, if you are in my position you will love it. Let me explain why. I have a full 1080p Sony LCD TV with 3HDMI input. I also have a Harman Kardon 7.1 receiver that has 2 HDMI input. My main Blu-Ray player as for now is my PS3. It will be nice if my receiver did not downgrade the picture quality from 1080p to 720p since it already burned me $1400 just for the receiver alone, but it did. I am not about to purchase a higher end model for another 1,800 too much money already spent.

In order for my picture quality to improve I would just have to send my picture DIRECTLY to the HDTV. But then I need the DTS-HD from the PS3 to split from the HDMI cable as well.

By using this splitter, I can have my PS3 Blu-ray movie send a signal DIRECTLY to my TV and I can also have my PS3 send a DIRECT signal to my Surround receiver. This way, my picture quality will not have to go via my receiver then to the TV. By this method it will receive the signal direct from the source(My PS3) and I will also enjoy the DTS-HD surround sound with a direct signal being sent to my Harman Kardon receiver at the same time. =)



This is a great example for what this splitter is used for. One source (MY PLAYSTATION 3)Blu-Ray player with one HDMI output. TWO RECEIVING UNITS (My Surround Receiver) and my HDTV (LCD TV) This way I can have a true 1080p picture quality and at the same time have a DTS-HD surround as well that both connects via HDMI cable.



Hope this helps!

I am in the market for a splitter, but saw the bad reviews for this product. I looked around on the Internet and found a "ConnectGear SWB-7850 HDMI Active Splitter with 1-Input and 2-Output". The active splitter is a $199 product (compared to this $18 product which is apparently passive). I don't know for sure, but dilution of signal may be the reason the cheaper passive product doesn't work so well. However, I can't vouch for the more expensive "active" option since I haven't tried it either. But I thought people in the market for a HDMI splitter might want to consider the active option.



Follow up: I bought a 1X4 PRO Series Powered HDMI Splitter (1.3b ATC Certified) from Monoprice. It splits one HDMI input into 4 outputs. I have only connected two televisions to my HD DVR so far, but it works perfectly. One of the TV's is connected by a 30 foot HDMI cord, and the other is connected by a 6 foot HDMI cord. There are no balance problems or any other problems for that matter. They also make a 2 port splitter that is a little cheaper, but I wanted the extra capacity. I'm not sure what else is out there these days, but I highly recommend the Monoprice product I bought. - Hd Dvd - Hdtv - Blu-ray - Splitter'


Detail Products
Detail Reviews
Click here for more information


Chew Toy - dog ball, planet dog


We purchased this ball as well as the Snowball, and 8-ball for our 11 year old pit bull for Christmas. This was a tough ball but did not last more than a week. She was able to pull the "Woof" off of the ball and then rip the rest of it to shreds. However, the Snowball lasted over a month before she destroyed it. That is an 11 year record for our dog! I would recommend getting the Snowball over this one or the 8-ball. Planet Dog Orbee-Tuff Woof Ball, Pink

My pup (and all her friends) love this ball. They are addicted to the strong peppermint scent or taste, I'm not sure which. It is very aromatic, even after several weeks of play in Chicago's Grant Park!

I have two golden retrievers who chew through every ball and toy I ever buy. Last year I bought one of Planet Dog's other balls and it survived both of them and still is as perfect as it was the day I bought it. I had high hopes for this ball - - it only last a few days and it is now in pieces in the trash. For $12, I expected better performance

I have a 3.5 year old female pitbull. I have had WONDERFUL luck with the ORBEE BRAND TOYS so I thought I'd give this one a try. I must say that it does try to hang in there as long as it can, but eventually my little girl got it all chewed to pieces. The ORBEE brand toys are made of very unique rubber material that is quite durable, smells like mint, floats in water and in some cases glows in the dark. The only problem with THIS particular toy is that the letters on the front of it gave my dog access to grip onto something with her teeth and little piece by little piece she was able to tear off the lettering which opened up the ability to eventually pick apart the rest of the ball. If you have a strong chewer like I do then I would highly recommend investing in the Planet Dog ORBEE-TUFF GLOW FOR GOOD Ball. My dog has had 2 of them for over a year...and there's not a scratch on them, even though she plays with them every single day. The trick with this version ball is that it is completely smooth all around so there is nothing her teeth can grab onto and tear apart. Overall though, I love ORBEE Dog Toys!! They are unique and my dog loves every one I have ever given her.

I got this ball for a choc. lab 1.5 yrs old. He loves the evil cuz balls, but squeaks them all the time until you kill the squeaker. We tried this as an Alternative. He immediately loved this ball. He can chew and chomp and it gives but does not rip or tear. It has holes to put treats in, and they don't fall out easily. I recommend it for all those ball loving dogs.

Ok, I wasn't expecting much from these balls. Afterall, they are small rubber balls with a hole for treats - meaning an inherent weakness built in. However, they have survived a week with a pack of serious chewers. The raised lettering vanished within a hour, but the balls themselves are still intact, still bouncing and the dogs have not lost interest in them yet. Totally worth the money.

My standard dachshund LOVES this ball. Although the first thing he did was tear the "Woof" off. Any raised bumps are chewed off of any toy he's ever had. I kept finding random letters on the carpet...other than that, the ball has been great. He did finally chew a tear into the larger treat opening, but it was a hard won victory. He LOVES this ball! He is a POWER chewer...like a wolf this boy. The ball holds up great!

The blue 'woof' coloring must be paint or something.. as it disappeared real quick. Still says woof, its just not blue anymore.



Other than that, this ball is great. It shows no damage and its been loved on by three large dogs for 6 months now.

Cool color, my dog loves to chase these balls and fetch. Has a hole for treats, green vs pink ball, green has won at our house. Just a neat tough toy with bouncey joy and keeps the teeth gripped well for hours of fetching fun. - Dog Ball - Ball - Planet Dog - Chew Toy'


Detail Products
Detail Reviews
Click here for more information


Elliptical Machine - elliptical, exercise


This is one great machine. It is very smooth,very stable and extremely well built. It took me a little over two hours to assemble and the assembly directions are very clear and well labeled with one exception. In the assembly directions, it calls for six #B screws when it is obvious they meant #A screws because they were the only ones left in the assembly process. I was worried that I would not be able to assemble it without help but had no trouble assembling it myself. For the money, I don't believe you could get any better quality even in a more expensive machine. I have very bad knees but this workout actually helps them and gives me an excellent full body workout. I recommend the Schwinn A40 to anyone. Schwinn A40 Elliptical Trainer

I'm quite happy with this machine and have already made significant strides toward my New Year's resolution of working out more often. Some notes:



- It does have a short stride length. I'm 5'3" and I actually wouldn't mind a longer stride length, but am okay with this one. People with longer legs may find themselves a bit cramped.



- The console is bare-bones. I find it difficult to read in low light, and have sometimes thought I set up a program only to discover after my 30-minute workout that it's still waiting for me to press the start button after having input all of the settings.



- The built-in reading ledge is actually perfect as a perch for my 10" netbook. I've happily watched Netflix episodes while exercising away. I don't think I could read a physical book, because there's no lip to the ledge and I'd have to hold the pages spread open, but magazines should be fine.



- I go barefoot inside my home, but can't get away with it on this machine, as there are significant indents on the steps. I ended up getting a pair of Vibram Performa shoes to get a close-to-barefoot feel without causing deep creases in my soles.



- When I'm at a running pace, the machine still feels stable but I can tell it's noticing the larger shifts in balance. I'm about 120 pounds; if you're significantly heavier, you may find it to be a bit more precarious for higher speeds.



- I can actually grab the back handle/base, lift (which tilts the machine), and pull this around without throwing out my back or anything like that, so if you do need an elliptical that you can move (short, non-vertical distances) around your house, this one may work well for you.



- It does run on batteries, but you can buy an AC adapter from the manufacturer's website.



I purchased this from a local store and had it delivered pre-assembled, so I can't comment on that aspect.



Overall, I'm quite satisfied. I wouldn't suggest it for serious runners looking for an indoor alternative, but if you just want something relatively inexpensive and don't need fancy features, this should fit the bill.

The trainer came pretty fast, but unfortunately, one part was distored. First I contact the company. It was a terribile experience, because they didn't have any parts available for replacement, cuz it's a new model. I called three times, the wainting period starts from one week to threee months. Each time, you got a different answer. The last time, they told me that You had to wait for 2-3 months for shipping from other countries.



Finellay, I called amazon, they replace the whole unit without any delay. Perfect! Amazong's customer service is far much more better that Schwinn fitness.



I'm 5'6", the stride is too short for me. I get used to those gym models with 24"stride,they burn more calories than this model. And I doubt the accuracy of the calories counter of this model.

works good, display is a little dim, wanted to opt for the ac adapter, tried to go to there website that was supposed to have the adapter, does not exist, I found a 9 volt dc transformer and made a connector for it because I did not want to mess with batteries, overall great product

I am a 22 year old small female, 5'4'' and 114lbs and I put this together my self in a little over an hour. Very simple! ( The hardest part was getting it out of the box, should have seen me on the floor both feet on the ends of the box trying to pull it out!) It weighs only a couple pounds less than me.



PRO's- Stable, not too space consuming, and a great workout.



CON's- Just for looks fan, barley puts any air out, Pulse grips are incorrect, and frame was a bit bent when received.



All in all I would buy this machine again for the price.

OK, to begin, I am commenting after only using the Schwinn A40 a few times so time will tell as to whether it still gets a positive rating from me, especially as to how the console holds up.



First, the order/set up. I bought this on Amazon using Prime and had it in two days....sweet! I took everything out of the box and checked to ensure all was there....which it was. The parts are easy to identify and marked either "R" or "L" which really helps on assembly and the directions are easy to understand as well. The hardware (screws, bolts, washers, etc.) comes on a cardboard sheet with each item lettered (A-B-C, etc.)and a drawn image of the item underneath. This is handy should you mix any up and in my case saved me time from a factory mistake. Somehow the metal Ex4 washers were put where the plastic Px4 washers were and vice-versa. At first I thought that the factory had not included the Ex4's but a quick comparison to the drawings answered that question.



The actual assembly was a breeze albeit around two hours as most reviewers have mentioned. It is a one person job although putting on the foot pedals is a lot easier with two. The fact there are two wheels on the front made it easy to move from the open area I assembled on to the room where it was to be used. Lift and push/pull is a lot easier than having to pick the trainer up; a definite two person job.



In my case I put the trainer on a carpet because that is where I need it. I thought from some of the other comments this might be a problem but it wasn't. The trainer is solid when you're using it, no wobble, and I didn't even have to adjust the feet for stability.



Second, are the accessories starting with the console. I took the advice of a previous reviewer and used an AC adapter that I had lying around instead of batteries. It works like a charm and I would suggest you not buy one from Schwinn; the can found for a far cheaper price at dozens of places.

Regarding the LED on the console it got a lot of negatives from other reviewers and after using it I see why.



The "readabilty" factor is not the best due to small, non-bold fonts and no backlight. Unless you have a good deal of light and a good pair of reading glasses (for some of us) it is difficult to make out many of the read-outs. Schwinn could dramatically boost the reviews on this trainer by making a more user-friendly console. That said, the built in programs themselves are more than adequate for our needs.



My last comment about the console deals with the heart monitor. It works by holding your hands around the sensors, a pair on each side of the console. When exercising I found it to be cumbersome trying to get the right grip on the monitors and getting close enough to read it while still pedaling. Schwinn should put these on the handles so you don't need to break stride just to see how your heart is doing.



Finally, the performance. I was somewhat concerned about the reviews as to the stability/performance factors some reviewers complained were poor due to their own height and weight. However, after using the trainer I can safely say it works for me.

I am a male, 5-11, 185 pounds, and the trainer handled my usage without any problems at all. The stride is just about right and the "flow" (arm movement with leg motion) suits me fine. Of course, like any new piece of exercise equipment, you need to get the "feel" of your machine and the A40 is no different. This is especially true if you have never owned an elliptical. (Think "patting your head while rubbing your belly" awkwardness at first)



As for the workout itself it is perfect for what I want: to build up cardio-vascular strength and lose a few pounds at the same time. The first program in the A40 is "Course 1" which, even after setting the minutes to only 10 and level to its lowest setting you are feeling the effects out the gate. For me that says I have a lot of latitude to increase the duration/difficulty of my exercising.



Overall, after a ton of research on these ellipticals I settled on the Schwinn A40 and so far am glad I did. For me it seems a solid machine, developed in mind for those who don't want to hassle driving to the gym, but do want a challenging workout out home. - Schwinn - Elliptical - Exercise - Affordable'


Detail Products
Detail Reviews
Click here for more information


Multifunction Printer


This printer is great, I did a lot of research and decided to try it. I have never owned a better printer. It connected to my home WiFi and every device in my house (including my iPhone and my wife's iPad) can print to it. Pages print at blazing speed, and I can load both photo paper and regular paper at the same time and it automatically selects the correct media. Photos are gorgeous and text is super black and crisp. Push a button on the printer and it makes a copy or sends a file to my PC. I tried printing from my camera's memory card and that was super easy, the color LCD leaves no doubt about which photo is printing. It is beautiful to look at, although I'm sure it will need a lot of dusting (it is glossy black).



I bought this printer because my one-year old HP quit printing photos after I upgraded to Mac OS X Snow Leopard. I decided to give Canon a try. I will never buy another HP again. I liked their print quality, but they "abandon" you with driver support way too fast. Plus this Canon is easily 4x faster. And for $149, well what is there to complain about? I cannot comment on the ink usage, since I just got it, but I will update this review after a couple of months use.



Bye, bye HP, hello Canon! Canon PIXMA MG5220 Wireless Inkjet Photo All-In-One (4502B017)

Got the printer a week ago...purchased it from Amazon.com



had it unpacked, connected to wi-fi and print cartridges installed and aligned in all about 25 minutes.



ran some test prints ...looked great..you know..brillant quality etc ...thought to myself..not bad..Canon does match and excel HP printers in the quality of prints.



That opinion was only valid until I ran two photo prints - I was BLOWN AWAY by the quality of the phot prints. Just jaw dropping clarity and looks at least 2x better than those crappy CVS/pharmacy store prints.



Ink consumption..no idea yet..but with quality like this, I don't think I'm going to bother too much about ink consumption now :)



This printer is UNREAL :)

-a Happy customer.

I am writing this review for those who, like me, needed a copier scanner but are not able to spend 5 months researching it. If you are an expert, please pass by; but if you are part of the general buying public, learn from my mistakes, if you can.



The machine promises nice features. It wasn't that easy to set up, but it could be done without too much trouble.



Why the complaints?

1. It is slow and cranky. It powers done between jobs. If you wish to print two photographs within ten seconds of each other, that is no problem. But if you copy a piece of paper and come back to make another copy 5 minutes later, be warned: it will take up 8 minutes to warm itself up again. Not such a good idea when someone is standing there waiting for his original.

2. The ink. Oh,the ink. So of course I had to buy a black cartridge and then a set of black, cyan, magenta, and yellow cartridges. Since I have yet to print a color picture, I have never used any save the large black. But, within 2 months, the machine informed me that they were all low. At which point it stopped functioning. It will not scan, nor copy, nor do anything. So I spend 60 bucks replacing cartridges that have never been used. And now it says I need to replace them again. And it will not function without them, even though it has only been printing in black. The result is that I have paid Canon an extra $120 . I haven't found the machine particularly fun to use. Sad to say, the lady at the Fedex/Kinko's calls me by name: it is easier and cheaper than using my Canon Pixma.



I don't enjoy giving negative reviews, but most buyers are taking a leap of faith when they buy, and I am suggesting that they leap in a different direction. It is the advice I wish someone had given me.

Upgraded from a "great" Lexmark printer we receive for Christmas three years ago. Not all that happy about the Christmas gift - but what can you do besides use it until it quits working? Researched this Canon printer for a while prior to purchasing it and it has not disappointed me at all. Amazing speed for a color printer and absolutely beautiful color photos. Compared a 4x6 printed at Walgreens to a 4x6 of the same photo printed at home and the home version was better than the Walgreens photo. Works well with my Canon SX10IS camera as well.



Easy installation on the XP platform even with our wireless connection.



I would buy this printer again. easily.

Good quality printer. I printed using the fast print quality option and still the paper image was very good. The first cartridge I had to replace ($15aprox.) was one of the black ones after printing 70 pages on both sides. The only two things I don't really like is first that it prints pages starting from the beginning which is not so great when you are printing lots of documents and either you have to pick them at the moment to keep the sequence or you will have to arrange them page by page after all the printing is done. Second when the printer runs out with a cartridge the printer will not allow you to print unless you press that is ok to keep printing directly on the printer which is an issue if you are trying to use the wireless feature and you are not close by.



11/10/2010. Update: Thanks to S. Hans I just found out that the printer allow you to switch your printing options to print from the first or last page. You can even print 2 to 4 pages in one. Further, I will like to add that the second cartridge that I had to replace, the yellow (about $13), was after about 150 printed pages on both sides, plus, about 50 in one side only.'


Detail Products
Detail Reviews
Click here for more information


Multifunction Printer Multifunction Printer

Foam Exercise Mat


I bought this mat to use with my P90X Workout DVDs. I wanted to use it as:



- yoga mat,

- padding for jumping jacks/running/lounges,

- ab work



It is ideal for ab work - it has a great thickness and the foam gives very good padding. But for the rest, it's not so good. For yoga, whenever I'm in a position that requires to stretch and press against the floor (like downward dog, for instance), the mat stretches with me, which is very frustrating. And it may be dangerous.



When I jump on it, it tends to move just a tiny bit, and the foam rubbing against the floor makes an awful, loud noise.



Plus, I used it while wearing my cross-training shoes, and my foot touched the mat while bringing a leg forward in a plank. It ripped it.



I would give it 2 1/2 stars, but it's not an option. It's a nice enough mat, but you need to use it for static stuff only, and probably not wear shoes with a substantial sole. Valeo Foam Exercise Mat

Good solid exercise mat. I use it mainly to stretch and do ab work. Only annoyance is that since it rolls up, it tends to stay rolled at the very end, instead of being laid out flat. But it's not really an issue for me, because I don't stretch my body the entire length of the mat.

Overall I'm very happy with this purchase.

It works well for my needs, for floor exercises and also my children use it to practice gymnastics.

The foam is pretty thick and cushions well, it is easy to store thanks to the attached fasteners.

Great buy for the 10bucks I paid.

I read a review of this mat that said that it was bad for jumping rope, among other idiot uses, and gave it only 3 stars. Wtf?



It's an excersise mat. For lieing down and doing excercises. The description could not be more simple. But, I'll review it in case others are confused (either by the product or by the other ppl's reviews).



The material that it's made of could not be better for an excercise mat. The mat is about and inch thick. It's made out of like a kind of synthetic-rubbery material. The material is such that it's equally supportive of your contours and firm enough where you'll avoid the distraction of whatever surface is underneath the mat.



The mat is a little bit bouncy. Not bouncy enough to jump rope off of it! But just enough to give you an extra push to do 4 or 5 more sit ups.



The corners do roll up a little bit but the length is long enough (just over 6 ft.) to not need the whole amount anyway.



Highly recommend.

This mat is perfect for what I ordered it for: a cushion on which to do my strength training exercises. It has a nice thickness and the attached straps encourage me to roll it up after use, rather than leaving it on the floor. The ends are slightly curled due to rolling, but if you just face those ends down on the floor, it doesn't make a difference at all. Overall, a great product and well worth the money.

The mat works great. It's soft and the padding is enough, even for a big guy like me. I use it on my hardwood floors while following my Yoga DVDs. The only drawback is that it's far too narrow for my wide body. I didn't realize that 24" would be insufficient for yoga. But it's great for the price. The only mat I found that was double the width (48") is around $100! So I will work with this one.

This is exactly what I was looking for -- an inexpensive, easy-to-carry mat that gives me some padding while doing sit ups or other excercises on the floor. I'm very pleased with it. The one negative is that it doesn't lay completely flat when I roll it out, but I use a couple of hand weights to hold down the curly end. It rolls up very small to store in the hall closet. It seems to be sturdily made to last through a lot of sit ups.'


Detail Products
Detail Reviews
Click here for more information


Foam Exercise Mat Foam Exercise Mat Foam Exercise Mat

Canon Ink - printer ink, inkjet printer ink


The Canon i9900 employs eight (8) cartridges. For several years I purchased the Canon 8-pack of refills. The eight separate colors seem to run out in even succession--except for the red and green--I have several new cartridges in my drawer. The six-pack does not include the red and green. Perfect! By the way, the Canon i9900 has been flawless for the several years I've owned it. And the photo color and clarity continues to amaze everyone. This may have something to do with the fact that I have never used any ink but the genuine Canon ink. You're money ahead to buy this 6-pack rather than get hit for $12 to $14 each down at your super-office-supplies store. Canon BCI-6 Black/Color Ink Tank 6-Pack Set (4705A018)

I suggest to everyone who owns a printer, to buy genuine brand ink. STAY AWAY from generic inks. I learned the hard way that they are just crap. Since I own a Canon Photo printer, I will ALWAYS buy Canon ink from now on. And Amazon is cheaper than every place else.

Great price, and prompt delivery; this is cheaper than buying individual tanks from the office stores, or just buying a 3 pack from huge warehouse stores. I tried the generic inks once and it smeared on my photographs and almost ruined my printer. This is my second 6-pack and I am happy with the price and convenience.

I received a new Canon EOS Rebel camera for a Christmas gift and after shooting some family shots I printed a few out and the colors were way off. I cleaned the print head and even did a print head alignment to be sure and still the colors were awful. I have a Canon I960 Photo Printer and had never had a problem until now. Then I realized I tried to save a few bucks and purchased "bulk ink" to refill my cartridges. I then ordered the Canon 6-pack set and it arrived today. I then printed a family photo on 4 X 6 Photo paper Plus Glossy with the "bulk ink" first and as expected it was lousy. I then changed out bulk ink with the new Canon cartridges and printed the same photo. Oh man, what a difference. It was back looking like a professional processed photo. I learned my lesson. If printing photos, stay with the Canon inks. THERE IS A DIFFERENCE !!!!!

Save your money and buy Canon ink. Years ago I bought a Canon 6000D printer and after the ink tanks ran dry I refilled them with third party ink. I didn't see any difference at first but slowly the colors changed. I started seeing a slight magenta cast, but continued to refill thinking I was saving money. A few weeks ago I bought a Canon Pro 9000 printer. I was shocked to see the beauty of my first print. It was a photo I printed on my Canon 6000D just days before I got the Pro 9000. What a difference. No magenta cast, bright yellows and greens, and an orange that would bowl you over. I then replaced the ink tanks in my 6000D with genuine Canon ink. After cleaning the heads I printed the photo again. Night and day. The quality of the 6000D print came close to that of the Pro 9000. The magenta cast was gone, all the colors were rich and clean. The tanks with third party ink is now in the garbage where they belong. I am now thinking of the wasted paper I used trying to get one good print using the NON Canon ink. I would have been way ahead, and saved money if I used Canon ink in the first place.

The cartridges worked as they should. Delivery was on time as advertised and the price was very good especially with the Free shipping. I've ordered other items from Amazon with free shipping and they usually arrive well before the estimated date. This time it was near the end of the estimated date but still a great deal.

I have two Canon printers, an i960 and an i9900. They both use the BCI-6 ink carts. We've used these printers for the past 4-5 years and have had excellent results. The i960 is a photo printer, but does not include the Red and Green inks that the i9900 uses. We use the i960 for general purpose printing and color snapshots. For my professional work, I use the i9900 only with Canon inks. I had to replace the print head last year, but it only cost me about $85.00. I NEVER had any clogging problems with either printer, even when I don't use them for weeks. The reason why I like these printers so much is that you have some flexibility with re-filling the ink cartridges. I purchased a re-fill kit from Sam's Club a few years ago (I haven't found them there recently). The design of the Canon cartridges allow you to re-fill them with 3rd party inks rather easily, once you get the hang of it. Refilling is sort of a crap-shoot.... you can damage a printhead by using inferior inks, and your color may not be the most accurate. I don't encourage my friends to re-fill, but we have saved lots of money on ink for the i960. The i9900 is another matter. This is a pro-quality printer and I just don't want to mess with it and 3rd party inks. So I stay with Canon inks, and Amazon is generally the only place I buy my cartridges. Buying them in the 6 and 8-pack sets is the most economical method. If you can get them for $9.00 or less, it's a good buy. - I9100 - Inkjet Printer Ink - Printer Ink - Ink Cartridge'


Detail Products
Detail Reviews
Click here for more information


Canon Ink - printer ink, inkjet printer ink printer ink Canon Ink - printer ink, inkjet printer ink

Bubble Wrap


This large roll of bubblewrap is packaged very nicely...it is easy to dispense from the box it was shipped. The wrap itself is perfect to wrap all your fragiles ,whether it is for your own storage or for shipping purposes. I would recommend buying this to anyone who is in small business and need wrap to protect their goods for the shipping proccess. Thanks for the fast shipping also!!!! Amazon service is always fast and efficient! Scotch Cushion Wrap - 240 sq. ft. Roll

These are the SMALL bubbles, not the 5/16 size, which would be the larger bubbles.



I wish I would have read closer that 3/16 would be the smaller bubbles. Get 5/16 like I should have, for larger bubbles.'


Detail Products
Detail Reviews
Click here for more information


Bubble Wrap Bubble Wrap Bubble Wrap

Micro Pinner


Need a brad nailer for your workshop? Look no further, this little tool is great. The compressor is small, lightwieght and (relatively)quiet. The nailer is also light but neverthless feels substantial and well built. And the gun uses so little air the compressor hardly ever needs to run. I use it for woodworking and projects around the home. Enough power for hard woods, and it does not mar the finish. I considered spending more for a DeWalt or Porter-Cable set up, but for my needs I'm glad I bought this package. It's easy to carry the entire set in one hand (very convenient). I'll never need to go beyond the 2 1/2 inch max. capacity. So ask yourself what you really need. If your not doing framing, work alone, and want a quality finished product, buy this set. The only drawbacks are (i) the instruction manual with little actual instruction and (ii) the 3 week delivery time. Hopefully supplies will increase over time. Senco PC0974 Micro Pinner Compressor Combo Kit

My wife purchased this combo package for me for my birthday this year (well, more like I bought it and thanked her for it). I have to say, I am impressed. THE BRAD NAILER:The gun is lightweight and small enough to get into tight spots, yet it appears to be very well built. The protective no-mar pad does not scratch prefinished moulding, and the side load magazine is convenient and easy to use. I shot about 200 2" brads while installing new 1/2" baseboards and 3/4" birch door trim in my bedroom. Every brad was countersunk to perfect depth, and I did not get a single jam. I ended up with very professional results and finished in 1/2 the time it would have taken me with the old hammer and finish nails.THE COMPRESSOR:The PC1010 will change the industry. For homeowners, hobby woodworkers, and customer service professionals in the cabinetry industry this is the perfect compressor. There is no need to lug around a 4 or 6 gallon compressor for a little brad nailer. You can easily carry the nailer, hose, and bread box sized compressor in one hand. From startup, this quiet, lightweight little workhorse takes about 2 minutes to pump up to 110 psi. I consistently got 10 shots before kick in, then another 40 seconds or so to recover. I nailed right through the recovery time, and never had to wait for the compressor to before driving any brads.SHORTFALLS:It is very difficult for me to find anything that I don't like about this one. However, rumor has it that Senco guns work best with Senco brads, and the local home improvement stores sell mostly PC and Bostich... so I will need to find another source. I would not recommend the PC1010 for anyone who wants to drive anything larger than 18ga brads, or run multiple air tools from a single compressor. Also - the compressor is so new that Senco has very limited literature on it, but I would be willing to bet they will get this taken care of soon.CUSTOMER SERVICE:Some of the best customer service I have had the pleasure to work with. If you purchased from an authorized dealer, and you have any problems with your equipment, I recommend calling Senco directly.

I agree with the other reviewers who have given praise to this product. I felt the same way till mine broke after less than a months use.Of course it was the compressor which broke, the part with the 90 day warranty. I did not catch that when I bought this.Senco is a good company, but I think this little compressor is not quite up to the quality of their other products.In my case it was the 1/4" copper tubing which brings the air to the tank that failed. It split where the tubing had been bent.I have fixed it with some liquid steel, since I'm on a job with it, I'm hoping the repair lasts till I have time to replace to tubing.I have used this to build two large bookcase and cabinet projects so far, and in doing so I have learned the compressors limitations. It does not do wellshooting two inch nails into MDF. It does not have the power to fully sink the nail into the material. I bought this combo for the light weightof the compressor, so I guess there must be some compromises. This won't take the place of more powerful compressors,but it is great for carrying to and from a job. I just hope I do not have problems with it in the future. I'm not sure I wouldrecommend this product, the 90 day warranty on the compressor is a big negative. especially since it seems to have some problems.

I got this package for very light duty use - woodworking shop projects and qtr-round molding on flooring. The nailer is a quality tool that sells for $120 everywhere so that makes the compressor only $75. I had a $15 coupon so the compressor was only $60 for me.The compressor is so light that it is no problem carrying it. The tank pressure is 125 lbs and I set the tank outlet pressure to 90 lbs. It shoots about 10 brads before it cycles but you can keep shooting as it runs. I used 5/8" brads on molding on a shop project and 2" brads on floor qtr-round without a single problem. This sure saves time and doesn't mar the wood. It is pretty quiet and also looks good. Getting to small jobs and using this little tool is a pleasure. I will get an air blower tip for it; so far I'm satisfied.

I upgraded to this from a cheap little electric brad nailer that could not sink a 1" brad. This tool is light and has plenty of power. The compressor is small & quiet and has absolutely no problem keeping up with the nailer. I own an old 5 horse 220 v compressor but wanted something to use inside the house without running hundreds of feet of hose from the garage. This will fill my needs perfectly. P.S. I shop online alot and would like to say that Amazon.com has the best customer service of any company I have dealt with.

I own several portable compressors, but hate to lug them around. So, I bought this one for installations of wood mantels and little odd and ends work (like attaching a piece of trim after the rest of the job is already done). The little compressor is lightweight and perfect for small jobs like these. On bigger jobs I still use one of my heavy duty compressors. So, that may be the problem some of the other reviewers are having. It's just not built for heavy duty work.



The gun on the other had was a disappointment. I already had a Senco XP 25 and prefer it. Still, it's a pretty good price for both pieces, so, no real complaints here. I've just set the newer one aside, for now.



Regarding the cheap 1/4 inch hose... pleeeease. Anyone with half a brain knows it's a cheap piece of krap, but will work fine for the occasional hobbiest. If you want a good hose, buy one.'


Detail Products
Detail Reviews
Click here for more information


Micro Pinner Micro Pinner Micro Pinner

Super Mario - caps, red


My 6 year old is a huge Super Mario fan and he loves wearing this cap and acting like Mario. I made a felt 'M' emblem for the front, got white gloves and fake moustaches and he just loves it! The cap is superbly made with a very comfortable fit. The inside is lined with a silky material and is very soft, yet extremely durable. The bright red also is highly visible. I love this cap! Cotton Elastic Newsboy Cap-Red 2

I'm a 24 year old female and wanted to be Mario for Halloween. This hat fit perfect and looked great. It is also high quality and well worth the price. I'll be incorporating it into my normal attire as a statement piece. Great all around!

Used this hat as the base for my Mario costume.

I simply bought some cheap felt squares at the craft store and cut out the M logo and used some craft glue to glue it onto the front of the hat.

Everyone loved the way it came out and it was much cheaper than buying the cheap looking premade Mario hat.

The hat seemed to be of good quality and fit well, it has an elastic band to fit multiple head sizes.

Overall its a great hat.

I purchased the red and the green newsboy caps last year for Halloween. I felt that for 6.99 it was going to be a felt hat of poor quality, but I wasn't concerned as it was only for one night. Imagine my surprise when these hats are lined, great construction, and have lasted my boys the entire year. Lots of colors to choose from, these are also great vintage looking hats.

Had wonderful service when I ordered 15 red newsboy hats. Our church choir wore them on Pentecost Sunday and also to show support for two members who had just completed chemotherapy. Got the hats right away as I didn't have much time to pull this together. Very impressed with the company that sold them. Later ordered 5 more of the same thing.

EllenCotton Elastic Newsboy Cap-Red 2

I actually purchased this hat for part of a child's costume. We got the red hat for Mario and the green hat for Luigi. The hats were shipped and received extremely quickly. The hat is of a very nice quality, especially for the reasonable price. We are still a few weeks away from Halloween and we can't wait to put the whole costume together and go out in public. The hats are definitely the best part of the outfit. - Caps - Hat - Cap - Red'


Detail Products
Detail Reviews
Click here for more information


Super Mario - caps, red red Super Mario - caps, red

Ipad 2 Cover - ipad 2 case, ipad2 case


Just in case anyone is wondering, this item isn't really a gel case (like a soft rubber or silicone) but rather a harder plastic case. The term "Flex-Gel" is really misleading. It's a bit stiffer than a TPU case and doesn't have the glossy softer plastic feel of TPU. It's more along the lines of a matte hard plastic (yet still flexible) that won't end up being a grease/fingerprint magnet (definitely a good thing).



While it's definitely different than what I was thinking it was going to be, it ended up being great because it has a really nice feel to it and is actually more of what I wanted. I bought this because it was one of the only iPad 2 cases available and figured I'd probably end up replacing it eventually with something different--won't have to now because this is really nice.



The only downside (and reason it didn't get 5 stars) is that it has a very sharp edge/seam running around the perimeter (at least mine did) so it wasn't very comfortable to hold--it felt sharp. But a minute or two with some very light grit sandpaper took that edge off and now it's smooth. Didn't mar it up at all either and is now exactly the way I want it. iLuv Flex-Gel Case for iPad 2nd Gen (iCC818BLK)

If you do not use a screen protector, this is probably a four out of five. However, if you do this may not be a good option. In my case the edges on the top would lift the edges of the screen protector, causing bubbling and general ugliness. This occurs during just basic holding of the device in hand. A deal breaker for me. This could easily be rectified by making the top edges just i little bit deeper I suspect. They also should package some sandpaper in the box... Sharp edges.

The gel cover is nice and snug on my Ipad 2. I really like it but I still wanted some protection for the front. The Smart cover from Apple does not play well with this case. Maybe I have to cut some holes or something to get it to work. Oh well. If you don't plan on getting a smart cover, this case is pretty nice.

Just got my iPad 2 on Friday and was looking for a semi-hard case to protect the back from scratches. I took a chance on this case after seeing it listed on PCMag.com as one of 25 best covers for the iPad 2. Amazon delivered quickly (as usual) and I have to say that this was exactly what I was looking for. Fits the new iPod 2 perfectly. Looks great. One thing I will note is that it does not work so well with the new apple smart cover but I figured that when I bought it. No scratches on the back for me!

This is an update to my earlier review. Love the case and the feel, its slim and perfect fit. It won't work good with the smart cover. I used an exacto knife and cut about 1/4inch from where the smart cover hinges would go from one end to the other end, and then put the smart cover on. So it functions the way it should and folds back if the case wasnt there. Very happy with the outcome and the look!

Pro's



Fits well, openings in the case in correct place



Con's



Feels like the plastic used in beach toys/sandbox toys



The case is relatively heavy, add heft to the ipad 2 (unlike the silicone skin cases)



The edges are sharp, they irritate your hand. Sanding them helps a bit, but still a pain.



The front facing edges of the case are almost exactly in line with the screen/housing

interface. This exactly where a screen protector's edges would be. This product lifted up the screen protector I got installed. You CANNOT use a screen protector with this device



I do NOT recommend this case.

The case is perfect! Slips on and off easily but won't fall off .. The white on white is sweet. The back is just clear enough to show the apple for tablet reconigtion and all button holes cut perfectly. Another plus for me on this is That the case has covers for the buttons ie volume is covered as well as lock button but is super easy to use! This case is great love the look the feel the fit highly recommend it!!

After 3 weeks, I gave this item another star! This case fits the iPad 2 snugly. I just wish it were "grippier".. my iPad feels like it may slip out of my hands if I wasn't carrying it so carefully and since it took me a while to find a retailer that had it in stock, I am being EXTRA careful with it. It's not really a gel case, but more like a harder plastic case that's flexible. There is an extra cut-out on the left side (I suspect they started designing this before the iPad 2's were released), but all the other openings are in their rightful places (speaker, headphone, volume controls, dock). There aren't many options for cases for the iPad 2 right now and whatever is out there is overpriced, so although I'm not 100% satisfied with this case, the price is decent and I received it within 2 days. I think I'm going to keep it.

This cover is generally a good design, fits well on the iPad2, and provides a stable surface for holding the iPad. However, this cover is not compatible with accessory plugs for the iPad. The connectors for the Camera Connection Kit, the Digital AV Adapter and possibly other accessories do not plug in properly to the dock-connector port. The cutout on the cover is not wide enough and prevent the accessory plugs from being inserted completely into the port. A call to the company's tech support indicated they were not aware of the problem and did not have a revision in place to correct the problem. They should have done a better job of testing the product before releasing it. The power charging connector works fine since it is smaller, so if you are never going to use iPad accessories, this cover is a good one. Otherwise you might want to wait for a revised version. - Ipad2 Case - Ipad 2 Case - Ipad 2 Cover - Case'


Detail Products
Detail Reviews
Click here for more information


Ipad 2 Cover - ipad 2 case, ipad2 case ipad 2 case Ipad 2 Cover - ipad 2 case, ipad2 case