Monday 6 September 2010

Toro Electric Snow Blower


I owned a previous Toro 1800 model for probably 7 years (ending in roughly 2000-2001). I'd get my driveway cleaned faster and better than my neighbors using their gas units. But, after 7 years, my Toro finally had it and I decided to get me a gas/oil mix snow blower.



I ended up with two different gas/oil mix units over the past 9 years. One gas snow blower lasted 3 years (I paid about $500 for it). The next one lasted 6 years and is on its last leg (I paid $465) for it.



Now, I FINALLY get to go back to a BETTER Toro 1800 model than the prior model that I loved so much (AND IT IS STILL THE SAME PRICE I PAID FOR MY FIRST UNIT 17 YEARS AGO!). I'm not waiting to purchase this unit since it is only $299 with free shipping. No way am I waiting. This model has been around a long time. That attests to its popularity, reliability and greatness. It will clear 10 inches deep, no problem. I've cleared snow over 18 inches deep, no problem. It chews right through the white stuff and tosses it clear off the drive by up to 30 feet. Powerful for an electric unit. And this latest engine is even more powerful! Can't wait!



I have cleaned up slushy snow (off the street) with this unit in the past. Nice clear path along the curb so the mail person can easily drive up to my mailbox in the winter. As 'convenient' as a gas snow thrower can be (for the simple reason you don't have to watch out for an electric extension cord), I can't stand it when the engine jets crud up and I have to get the doggone gas unit 'tuned' for a $100+. I started straining my oil/gas mixture through my wife's used nylons (a mechanic told me that trick to keep the jets clean from impurities in the gas/oil mix) and that worked well for not needing any further tuneups. But, I always dreaded coming up to the next season 'wondering' if the gas unit would start, how it would idle, and how long it would last before dying on a heavy snowfall day. I NEVER HAD TO WORRY ABOUT SUCH THINGS WITH MY PAST TORO 1800 ELECTRIC SNOWTHROWER! It always started, always ran powerfully, and always did a better job cleaning the driveway than my gas/oil powered units.



So I AM BACK FOR ANOTHER ROUND WITH WHAT APPEARS TO BE A MUCH IMPROVED VERSION (and the other model was already great)! I can't wait for snow to fall now! I'll be ready. I'll be thrilled. I'll be glad to be the ONLY ONE (AGAIN) in our neighborhood with this powerful electric snow thrower. My neighbors have purchased huge, powerful gas units. Man do they rev for 1-2 seasons. Then, I hear them chugging and choking (I know they don't filter their gasoline through nylon stockings) and then I see them loading these heavy gas hogs into their RVs for the semi-annual trip to the tuneup shop. I WILL NOT MISS THAT AT ALL. RELIABILITY, POWER, EFFICIENCY, CLEAN RUNNING, NO POLLUTION, ALWAYS STARTS, ALWAYS RUNS, WORKS LIKE A CHAMPION WORK HORSE, I AM NEVER GOING BACK TO THOSE MESSY GAS/OIL CHUGGERS EVER AGAIN. Not with this beautiful, electric, Toro back in my garage again (FINALLY - WELCOME HOME TORO!)



9/27/2010 - My new Toro arrived on Saturday (9/25/2010). Thanks for the quick shipment, Amazon. My new 100' 12-gauge extension cord arrived today (9/27/2010). Usually I don't look forward to winter. Now all I can say is: I'M READY - BRING IT ON!



11/11/2010 - Just a note that the shipping box mentions the type of extension cord to get. "Use 14 gauge extension cord only to 100'. Use 12 gauge extension cord only to 150'." I purchased the Pro-Power 12 gauge outdoor extension cord by Coleman Cable, Inc. On Coleman's selection guide, it says the 14 gauge gives you 15 amps up to 50' and 13 amps up to 100'. According to Coleman, the 12 gauge gives you 15 amps up to 100' whereas Toro says the 12 gauge is good up to 150'. I think your safest bet is the 12 gauge 100' but the 14 gauge will probably work just fine up to 100' (according to Toro's shipping box stats). A few more weeks and we'll post the results of our first uses with this powerful machine. Toro 38381 18-Inch 15 Amp Electric 1800 Power Curve Snow Thrower

Have shoveled, bladed, & blown lots of snow in 55 yrs. Last snowblower was craftsman gas blower that is still working out at the farm. I am 64 & needed something lightweight & powerful that I can pick up & move as I need to! Very easy for one person to assemble. This is the tkt. I just came in from blowing one foot of snow on long driveway & sidewalk at home in town; plus the double driveway and corner lot sidewalk of my 91yr neighbor. One pass all the way to the concrete every time. It took me one hour start to finish. No clogs & the snow slid off the surfaces of the blower & no snow to clean out of the chute when done. I especially like the directional handle on the chute for snow. It allows a good dispersion of snow at a low angle so one is not hitting the neighbor's windows. The throw distance of the snow is equal to larger snowblowers I have used. I am a widow & have to pay for upkeep on sparkplug/gas driven items; and I am converting to electric yard items when possible. The price was reasonable & free shipping was an extra bonus.

The Toro Power Curve is not a bad machine for the right situations. At times I've been impressed by its effort-- but ultimately my needs were more than it could handle. I give it a mostly positive recommendation, but before buying just make sure you aren't expecting too much from this machine.



Living in Wisconsin we get a lot of snow, and my previous snowblower was a small 18" MTD that handled most everything for 12 years. When it died I was going to replace it with another but I was intrigued by the postive reviews on the electric models. Of course I never expected it to be as powerful as the gas blower, but I thought it would at least be better than shoveling. Which it is.



The assembly is simple. Five minutes to put the handle on and attach the levers. Then I purchased a 100' 12ga extension cord for $40. That's it-- you will never need to do or buy another thing for it.



True to Wisconsin weather, I had a chance to use it 6 times in the first three weeks. The first day was 3" light powder which the Toro chewed through quite well and probably cut my normal shoveling time in half. The second was 5" of day of crusted day old snow. The Toro actually worked a little better with this, probably because it had a little more solid substance to it. The third day was a 12" blizzard that left high drifts at the edges. And to be expected this is where I ran into problems. It was just too much for the Toro to handle and though I was able to clear most of our driveway it took a couple hours and a lot of help from my shovel.



And to be fair, I'm not judging based on THAT-- it is rated for light snowfall and a max 10" intake, not for replacing a large 2-stage snowblower. It seems very well suited for 3" - 8" of snow and smaller areas such as patios and sidewalks. Our driveway is apx 1000 sq ft and I think that's probably the most you'll want to do. Thankfully it seems able to throw snow at least 15'-20' feet depending on conditions. Many of the reviews on here claim they were able to do 12"-16" of snow with it. I'm not saying that's impossible... But I do question if its worth the time and effort to push it through that much snow. In those cases its probably necessary to do it in two 6" layers during and after the snow.



My tips for using it are to have a good plan with the extension cord. It is very annoying to keep manuevering 30 lbs of heavy plastic cord and bending over to move it. I tried to use an S shaped pattern and kept it on my shoulder which helped but the best thing was to have my wife follow behind me holding the cord. True, its taking two people and looks strange-- but I was able to clear snow twice as fast. Also when you are at snow drifts higher than the intake-- use a shovel or boots to knock the snow down in strips and then you can go over it with the blower. It also helps to move slowly in narrow strips to keep the motor from bogging down.



It is smaller than I expected, mostly plastic and very hollow feeling... But I'm not overly concerned about its durability/quality. Some reviews complain about the plastic blades and body, but Toro has made the Power Curves this was for 20+ years. Todays plastics are very strong and the previous Power Curve model has over 700 positive reviews and very few complaints of any parts failing. If I had any strength concerns it would be the metal handle which seems to flex too easily when pushed with force.



The positives:

-NO maintenance

-its very light

-its small and easy to store

-its quiet. Think: a vacuum cleaner.

-history shows it has good build quality and longevity.

-it quickly clears small to medium snow-- probably perfect for areas with light snowfall

-snow is thrown an impressive distance (10-20')



The negatives:

-its somewhat expensive. A decent 179cc blower is only $50 more.

-the wheels are too small-- I use them frequently when backing up and often end up dragging it. (TIP: I've since replaced them with larger rubber ones from a spreader and it works better).

-you need to press the trigger AND a small safety button at the same time to activate motor. This can get quite difficult with gloves or mittens on. (TIP: I put a small C-clamp to keep the thumb button depressed and it was a huge improvement.) The plastic main trigger seems difficult to keep depressed unless you use two hands.

-its very annoying to work around an extension cord.

-The metal handle seems a weak point. I worry about bending it or breaking the grip while pushing through deeper snow.

-the thrower spout moves in several ratcheted positions. But sometimes I wanted a direction that is right in between two settings...

-Don't expect to clear out 12"+ of snow as quickly as a gas blower. It is possible in some cases, but just be realistic. It will take more work.



I'm going to try and stick it out with the Power Curve for the rest of the winter, but next Fall I'll spend the extra $50 for the single-stage 179cc blower instead. While it wasn't the best fit for me, I'm sure there are a lot of places and people that this will be a very good purchase. Just be realistic about its features and what you expect from it.



--------- *2 Month UPDATE* --------



After 2 months the snowblower suddenly stopped working. Pulling the trigger produced nothing. I disassembled the red cover and was very disappointed to find the wiring from switch to motor was connected with regular twist-on wire connectors that had come undone. Seems a bad idea with the constant vibration so I replaced with waterproof butt connectors.



So that was fixed, but even more disappointing was the entire motor compartment was had quite a bit of water in it. The connectors had water in them and the motor armature was wet and the housing covered in rust (after 6 uses.) I am fairly meticulous about drying and wiping it down after use-- but come on, its a snowblower-- its impossible to avoid water. Maybe its meant to operate damp, but it can't be good for longevity and I'd feel better knowing this was better sealed and connected.



--------- *3 Month UPDATE* --------



Used it for the 7th time in 5 inches of fluffy snow. Motor periodically cuts out. Worse the snowblower blade stopped spinning altogether. Probably a busted belt, but at this point I really don't give a _____. Its going in the rummage sale this summer at a very very cheap price...'


Detail Products
Detail Reviews
Click here for more information


Toro Electric Snow Blower Toro Electric Snow Blower Toro Electric Snow Blower

Tire Inflator


so far its been working aa i expected. however i wish the guage was made of metel instead of plastic. that is the only thing i don't like about it. but i use it everyday in a shop with no real problems as far as i can tell, seems accurae ( one month of use...) Ampro A1430 Tire Inflator with Gauge

Overall ok tire gauge. I had to replace the part the contacts the valve stem because the one that comes with this inflator is to small and air leaks around it when using it. The other problem is that the inflator part should be able to rotate 360 degrees and for some reason mine seems to be stuck in one position which makes it harder to work with.

Bought this along with the Ampro A1460 18 Piece Air Tool Accessory Kit Milton Type for use around my garage for when my tires inevitably get low. That said, it's not going to get used more than a few times a year by me, I just dislike going to the gas station and having to pay my few quarters for a couple minutes of compressed air.



I've used this once so far on all my tires and to put some in on my scooter as well. As the other reviewers have mentioned, this doesn't rotate (at least mine didn't). I didn't notice if the gauge was plastic or not but can't see how this matters unless you are using professionally.



Overall: a solid addition to my garage.'


Detail Products
Detail Reviews
Click here for more information


Tire Inflator Tire Inflator Tire Inflator

1080p - 40 inch hdtv, 120hz


I purchased this TV to replace a 2006 LG plasma that went out of commission. It was going to cost $300-350 to fix it so why not spend a little extra for a brand new TV... Overall extremely happy with the TV, it was a very good value for the price.



1) Picture quality - of course compared to the old LG plasma, the picture quality of fantastic. Rich colors, very little glare on the screen, pretty good viewing angle. I looked at this and several other Samsung models at a local electronics store, and I honestly could not tell much difference between this model and some of the higher-end models in terms of just the picture. I was specifically interested in the D550, which is about $100 cheaper since it is 60 Hz, but the D630 did have a small but noticeable improvement in fine details especially with moving objects. I also thought about the D5500 but to me there was not much difference between LCD and LED all else being equal. I can see why LED would be attractive for people who plan to hang it on the wall, but if you are going to let it sit on a stand you can't really appreciate how thin it is anyway. Made more sense to spend the extra $100 for 120 Hz than LED.



2) Sound quality - so so, but what do you expect from a TV. It is good for regular TV viewing, I really like the "clear voice" mode which lets you hear conversations easily without cranking up the volume. The TV speakers sound a little thin or hollow if you are watching a movie.



3) Other features - remote works fine, nothing particularly good or bad. TV stand swivels, which is good. Connectivity is good, 4 HDMI and 2 USB are more than enough for me. It does not have built in wireless, which didn't matter for me since my router usually sits under the TV anyway so I just hook up the ethernet cable if I needed internet connection. No web browser or apps, which again would have been pretty useless for me since I can get all of that through my PS3. I tried the Allshare feature to stream videos from my computer to the TV. It works okay but I find it easier to just connect my portable hard drive to the TV. Samsung LN40D630 40-Inch 1080p 120Hz LCD HDTV (Black) - 40 Inch Hdtv - 120hz'


Detail Products
Detail Reviews
Click here for more information


1080p - 40 inch hdtv, 120hz 40 inch hdtv 1080p - 40 inch hdtv, 120hz

Comfortable Clothes


The pants are great...they look good and the quality is what you would expect from Levis. They were a little too long....I bought them for someone else as a gift and they were too long for a 34. For some reason these seemed longer than normal. Levi's Men's Cargo Pant, British Khaki, 34x32

The design of these pants are great, but beware, try them on in the store rather than ordering on-line, because you will be returning them. The waist on the earlier production run of these pants measured larger than what was on the tag. In other words, if you order a 36" waist, the measurement of the pants were a 38 1/2. Now, the later

production run, are running small. I ordered a 34x34, and when the pants arrived, I could not fit in to them. The length measured 32 1/2. I had to pay to return these back to the company in Okalahoma City, and they will credit my account in 2-4 weeks, the price I paid for the pants, but not my shipping cost. Quality control, is a thing of the past, and greed is a thing of the present.

The cargoes are great. Light, loose, and soft.



I ordered the waist size one smaller than usual, anticipating slightly baggier pants, and I was right. I'd advise you to do the same. Also, the pants are a bit longer than usual for the size, but I expected that.

I am constantly looking for pants that do not have a lot of seams that can cause problems when you are wheelchair bound. These pants are great. As with all my pants, I cut off the back pockets before I use them. This was easy with these pants and after that they are good to go. I wear them all the time, including work.

Anyone who's Tall and on the normal/skinnier side of things knows how incredibly frustrating it can be to find clothes. Most stores only carry up to 34W x 36L if you're lucky, and Big & Tall stores usually start their sizes at XL and go on up.



Personally, I'm a Large-Tall with 34W x 38L pant-size. Pants that size, beyond straight khakis or Docker-style, are almost impossible to find, online or elsewhere. I've only found a few companies who make them, much less retailers who sell them - and here I think I've found my gem.



I'm a big fan of cargo pants. I go to college and ride there on my bike. Pocket space is a premium when you have loads of books, calculators, dry-erase markers, pens, pencils, etc. Finding cargo-style 38L pants is even harder than regular jeans (for those who are 34W x 38L and want jeans, I was able to find some at Buckle - for sixty-dollars, granted).



Rest assured, these pants seem to fit the bill with what I was looking for. The fabric itself isn't as thick as Carhartt's pants, and I'll have to see how these hold up over time, but so far the quality seems to be there. The cargo pockets and back pockets use metal buttons, all the seams are sewn well and don't show any obvious signs of being low-quality, the pocket lining has that satin-y feel, and overall construction seems to be up to the higher-end Levi snuff.



The pants are a little wider in the waist length, as others have said, to sit with contemporary styles. I ordered a 34W and it feels closer to a 35W, which is just fine with me since I have a nice belt to hold them up.



Most importantly, the length seems to be correct! Maybe even a little more given contemporary styles again, but it's an utter relief to be able to take a seat in-class or on a bus and not have 6" of ankle showing.



I have yet to order other colors besides the Khaki since they weren't on sale, but the color itself is pretty close to what you think of as khaki. They're pretty much tan.



If you're in the minority of us who are Tall but NOT BIG - give these pants a try. I'm sure they'll work well if you're B&T, but I'm glad Levi makes these things. When the prices come down again, I'm jumping on a few pairs.'


Detail Products
Detail Reviews
Click here for more information


Comfortable Clothes Comfortable Clothes Comfortable Clothes

Durable Material - coats, womens


After looking at several other labcoat's reviews, I decided to buy this one. It was exactly what I was looking for. I needed a labcoat for a tall person, and this did not disappoint. It was a tad big, but I took it in anyways. The fabric was wonderful and it was very sturdily put together. I love the three pockets as well as the slits in the sides so you can reach your own pockets. It was very easy to handle and doesn't wrinkle as much as I anticipated. Full Length Lab Coat tall, 48T, White

This lab coat was of excellent quality. The only down side was the shipping cost to Alaska was as much as the Lab coat itself. When I voiced my concern, the company refunded my shipping cost. I would definitely recommend this company to others. - Womens - Labcoats - White Lab Coats - Coats'


Detail Products
Detail Reviews
Click here for more information


Durable Material - coats, womens womens Durable Material - coats, womens

Construction Staplers - nail gun, reconditioned tools


I have to start by saying...if a product is available reconditioned, I'm all for it. I'm an avid buyer of anything from CPO sites, when product available. The Bostitch MIIIFS flooring stapler was unbelievable and I kick myself for not buying one for an earlier flooring project. As a DIYer, I've put in almost a thousand sq ft of brazilian cherry, using a manual nailer...uggh. I wasn't going to do that again when doing some pine in the upstairs. Ok, pine is MUCH softer than cherry, but, having to swing into a piece of pine also has a much higher chance of damaging the edges, so I wanted something that would drive the fastener (staples in this case) without alot of hammer swing.

I thought to myself...well, probably won't hold as well using staples as the barbed nails on my manual nailer...wrong. If anything, the staples hold much better. I had a couple pieces of the pine during this last project that required pulling up a piece I had stapled...it destroyed the edge (tore out) but left the staples in place. I suspect the staples may be cement (or similarly) coated to help adhesion. I'm sold on staples and this has consistently been the tool of choice by pros among the forums.

You won't be disappointed with this item...and when you are done with it...they hold value well and sell quite easily on various selling lists and online auctions. Factory-Reconditioned Bostitch U/MIIIFS 1-1/2-inch to 2-inch Pneumatic Flooring Stapler

I bought this stapler to install multiple rooms of BR111 7/16" Santos Mahogany flooring. I was skeptical after receiving it whether it would work with the 7/16" flooring, but figuring it was the industry standard in flooring staplers, I went ahead and gave it a try.



It did not come with an compressor attachment fitting - the fitting was 3/8" NPT, not 1/4" like my compressor. I went to Lowe's and purchased a 3/8 to 1/4" reducing fitting, then added a swivel 1/4" NPT male connection. This really helped and for $3 I solved the vexing problem of the twisted air hose.



My flooring has very thin tongues on it and is susceptible to splitting. When I fired up the compressor I started at 80 PSI and this split nearly every tongue. With some test pieces, I found the 70 PSI on my compressor seemed to be the right setting. I still had some split tongues, but any less and it did not drive the staple deep enough.



I bought a box of 5,000 staples from Fasteners USA - they advertised no shipping cost, and the box of 5,000 was only $30. The box of 1,000 nails from Amazon.com was $16. Because the shipped from Modesto, CA, just east of the SF Bay area where I live, they arrived in 2 days. I have several more rooms to go, so it was a good buy. [...]



When I got started all seemed well until I had my first partially driven staple. It likely hit a screw that is holding down the subfloor. As expected, these are a beast to pull out - it's good to know that. These can be pulled out with the right type of tool Channellock 35-250 10-Inch Concretor Nipper, but you risk scratching the floor or breaking off the tongues. I learned this the hard way. Even when I had to remove a defective board, it was tough to pull out the whole staple without cutting it off using the nippers. The best solution: use a Dremel tool with an abrasive cutoff wheel. It can get right down next to the tongue, and even cut under the tongue if needed. This worked wonders cutting the staple off flush with the tongue, leaving the tongue and the board undamaged. You can then put a new staple in to the side of the original, and the next groove fits over the tongue perfectly. Until I discovered this, each time I hit a screw, it was a 10-20 min delay to cut if off to an acceptable height where it did not interfere with the next row of floor. This really sucked time. I would highly advocate you have a Dremel or other similar tool if you use this stapler - you will save yourself so much time.



Flooring installation is just board by board. There is no magic here - it's hard work and takes time. I doubled my installation progress the 2nd day, and it got easier after that.



Back to the stapler - it is a solid device and works very well. No hint of it being refurbished, except for the Bostitch emblem that came off - it was held on by double sided tape.

After looking at local hardware stores for a new hardwood floor stapler, we found this one on Amazon for hundreds of dollars less than the new ones; even cheaper quality new ones were way more expensive than this reconditioned Bostitch was. We received the stapler within 2 days of ordering and have used it to install the hardwood floors in our home. The stapler looked like brand new when we received it. We have installed 1,000' of maple flooring thus far, and the stapler performed perfectly. It never jammed, it never misfired. It was a great tool and made installing the floors a breeze. It's still a lot of work, as you have to pound the stapler with the hammer each time to fire it, but it's much easier than doing it manually. The floors look beautiful. We still have another 1,000' of floor to install on the second floor, but we're confident the stapler will continue to perform as it did for the first part.

Just recieved my hardwood flooring stapler it arrived in less than 72 hours after i ordered it. I am glad that I did not buy the brand new one at Home Depot. Saved myself over $200 and this one looks brand new and works perfect. I also noticed that it is warranted just as if I bought one off the shelf. I will continue to buy from CPO Bostitch.

Pros:

1. Amazon shipped it fast.

2. It is a stapler.



Cons:

1. This is not a RECONDITIONED. It is a terribly used, uncleaned, stained, malfunctional unit with missed accessories.

2. I bought tons of stuff from Ebay, Amazon, Craigslist and other place. When something that is stated as refurbished or reconditioned, it is in reasonable condition. I don't expect them to be brand new, although most decent manufacturers repair and clean the item to almost brand new. Bostitch doesn't. If I put what I received on Craiglist today, I would say "six out of 10", in terms of condition; or something like "extensively used, but might still in working order".

3. Any piece of paper in my trash box is in a better condition that the document that came with the item. - Nail Gun - Cpo Bostitch - Reconditioned Tools - Staplers'


Detail Products
Detail Reviews
Click here for more information


Construction Staplers - nail gun, reconditioned tools staplers Construction Staplers - nail gun, reconditioned tools