Makes reasonably quick work of trimming a door edge that rubs, but doing a neat job takes some practice. Heavy touch up sanding will be required.
This Dremel attachment is like every other Dremel attachment I have been suckered into buying, it is clearly designed by bean counters. It works just good enough that I would feel bad about throwing it out. For $20, it is a nice tool to have, but I would gladly pay more for one that had a better guide and did a neater job.
A couple specific gripes:
1. The 1/64th depth isn't off by a bit, it is off by a factor of 4. It planes nearly a 1/16th off per pass. I'm still trying to figure out how they came up with the 1/64th number.
2. The guide is useless, it is up to the user to attempt to keep the tool flat on the surface. This takes some practice and will result in some gouges and uneven planed surfaces that need to be smoothed off with sanding. Dremel PL400 XPR Planer Attachment
This tool embodies a great concept, and who wouldn't want to dispatch that sticking door problem with five minutes effort and a quick vacuuming?
But I was disappointed with the performance of the tool, mostly because of two factors.
1. The cut on each pass is fairly deep, maybe as much as 3/32".
2. The right-angle plate that's supposed to help you keep the tool square to the face of the door is way too short to be effective.
Consequently, blending the cut from one pass into the next is effectively impossible. If you make three overlapping cuts, you will get three clearly visible steps in the cut. And by visible, I mean visible when you're looking at the face of the door, not just looking up close at the edge or top.
Also, especially because of the weight of the tool pulling down on one side, it's extremely challenging to keep the cut perpendicular to the face. Expect a wavy edge that's also visible when looking at the door face.
On the positive side, it did fix the problem. I just wished when I was done that I took the time to scribe the door, take it down, and plane it. Something told me this tool would be too good to be true, but I guess hope springs eternal :).
No, you won't be doing any fine woodworking with this Dremel XPR attachment. But for twenty bucks, it makes awfully quick work of planing the bottom of a door so that it closes. I recently did a bathroom tile project, and needed to take just a tiny bit off a section of a door. The planer attachment certainly did the job.
It does make a lot of dust/mess, and the guide is far from perfect in keeping you at 90 degrees to the door. Overall, however, it's worth the money.
Used this to grind down a sticking door, and adjust the size a different door that I was about to hang, with great success. I recommend that you take a few minutes to get a feel for the balance of the tool before getting started or you WILL get a wavy cut. It gets a 4 instead of a 5 because it leaves 'pass marks' that have to be sanded out or neatened up with a block plane.
Would have liked to see a depth adjustment on this plane, but I am very happy with it.
Not adjustable at all.
I needed this to shave off a little bit of wood backing that was sticking out 1/8" from behind some book shelves I built. The problem is that the planer is only designed to be used in one direction. If you can't use it in the direction they want you to, you are out of luck. Also, you can't change the depth of the cut, so if you don't want that deep or shallow of a cut, you are out of luck there too.
I ended up using the planing bit without the casing, and had better luck doing it that way, but it wasn't perfect like I was hoping the kit would be able to provide.
I would have given it only one star except that I was able to use the planing bit alone for what I needed. That is why two stars.
I burned up my brand new XPR400 with this little gadget. I trimmed off maybe 1/4 inch off of 3 doors. By the 3rd door the motor was sounding rough. The motor burned up the next day using it with a cut off wheel. This attachment makes the unit get realllly hot. The tool is turning a really large blade compared to anything else you turn with it. To top that off with the end of the blade isnt supported by anything it just fits in a hole and rides metal on metal. Dremel says the blade is designed to last as long as the attachement 500 BF. I did about 200 and its pretty much ground off (Very old Pine).
I think if you keep the motor well blown out. Dont over tax it and plane a fair amount of 3/4 or less wide your good to go. It really works well. 3 or 4 10 minute sessions on a 1.5 inch door will prove to much for this little tool IMO.
I'm going to see if Dremel will honor the warranty. I will let you all know.
-Mark
If you own a Dremel, this is a "must own" attachment for it. I do maintenance in group homes and doors opening & closing properly is a critical thing. We have had a wet humid Spring where I live and in the past couple weeks I have had several doors that have swelled and are sticking on the top corner and edge. With the planer attachment, I can plane the area without removing the door. It leaves a nice smooth edge and allows you total control while doing it. I save a lot of time every time I use this great gadget. Highly recommended! Dremel PL400 XPR Planer Attachment!
Product planes fast with my RTX (or dremel), but the line is warped and is hard to keep straight. Apparently, attachment will work on any latest dremel or RTX if you cut off the pesky tabs. Just make sure you don't overheat by stopping often. Wood bits fly everywhere.
I think a jig saw with a ruler guide would work better. Well, I paid half price for this tool, so I am glad it was dirt cheap. - Dremel - Art - Attachments - Accessories'
Detail Products
Detail Reviews
Click here for more information
