Sunday, 6 February 2011

Independent Film - shotgun, budget


This mic doesn't perform as well as a Shure or Sennheiser shotgun microphone, but it doesn't cost $999 either. I'm using it with a JVC DV camera, and a Behringer 10 channel mixer. It's well worth the money. For the best location sound, use this mic on a boom pole, and lavalier mics for each actor. I was blown away with how much better the sound from this mic is than from the Shure dynamic (handheld) microphone I was using before.If you're working on a low budget movie, and want to have professional, reliable, and easy to use sound equipment, this mic is worth the money (it even includes a shock mount). Azden Barrell Shotgun Mic With XLR Outputs

The Shotgun Mike is ideally suited for anyone picking up a prosumer camera and who needs a shotgun mike that offers excellent pickup at a reasonable rate. Be sure to pick up the 18" XLR-XLR cable and the 6" XLR-3.5 cables. The shock mount I received came with extra bands.

This is a good entry level mike for you. Couple this with a UHF lav mike (or two) if you intend shooting fiction or documentary.

A Gitzo boom pole & shockmount (sold separately) along with a Fostex data recorder can give you a killer sound recording kit.

Bought this for use with a panasonic ag-dvx100 and I haven't been disappointed--the audio quality I've captured is much better than that with the factory mic. I wish I had seen the two-barrel version of this earlier...oh well. It takes an XLR cable (well that should be obvious from the description) so a buyer should be clear that they have 3pin XLR jack on whatever equipment it is they are recording into. This is a decent mic for $150, it won't blow you away but neither will the cost. Comes in a little pleather pouch, with a foam windscreen, shock isolating mount which screws into the hot shoe adapter and is better in design than the one standard with my camera, as well as some replacement rubber rings for the mount. The mic takes two AA batteries if I can recall. It has an off /on switch, and it has a cardioid/super-cardioid switch. Pretty basic.



...I'd like to mount this on a boom eventually...

This is a wonderful shotgun mic, for anyone on a budget. It's very powerful and it is a great step up from the built-in mic rigs on most consumer camera's as well as some prosumer cams. For instance, huge step up from the built-in on the Panasonic AG-VX100B (which I own). It has a huge range, and has two modes I always use the higher cut mode that removes slighter sounds. This makes the sound a little heavier, but keeps them very clear and not muffled.



Also, if you expect to record high pitch things, this isn't too great at consistently staying high. It is more whole from the low-mid range sounds, but does not fail at high sounds.



Another plus, is the fact that it won't drain your cam batteries because it holds a single AA battery to run. I prefer it that way.



The only problem with this mic, is that with a little more research--I found out that the X2 is only 50 more dollars (approx) and that the X2 can double as either an omni mic, or a cardoid--which is a great nifty feature for the extra 50 bucks.



If you don't think you even need an omni feature, this is a great mic to start with. (and keep for a very long time)

I believe this is the BEST shotgun mic on the market priced at the 150 range.

I bought this mic in Nov, 2010 for $152.00. I couldn't be happier with it. I'm a film student and the quality of this mic is great. It is a very strongly directional (cardioid) mic and gives me better results than mics twice its price (or more). Also, the included shock mount with extra bands was a nice touch. Mine came with a nice zip-up leather case for everything with it too. I used this and an adjustable painters pole for a short film project and it did excellant.



For any of you all who are interested, I used this with a Blue Microphones Icicle XLR to USB Mic Converter/Mic Preamp and a netbook/audacity to and had great results in combination with a Canon T2i. The only problem I had was that at times my recording was a little bit quiet. However, I'm not sure what part of my setup was to blame.

I took this to Europe with me to film a documentary. It worked well. I've used a bunch of shotgun mics. I like this. Not more or less than others I have used, but it is def. a lot cheaper.



If you are on a tight budget then get it.

As an amateur filmmaker, I was searching for a great LOW COST microphone to pair with my zoom h4n for sound to my Panasonic gh2 (dslr camera)... This mic was the best solution... As others have said, the sound quality won't blow you away but its a great starter mic... cant beat the quality for the price... Eventually I hope to move to the near $500 Sennheiser ME66

As a beginning filmmaker I purchased this microphone for use with the Sony HDR-CX160 High Definition Handycam Camcorder (Black). After beginning to use it I realized that the volume was extremely low upon playback. When I increased the volume in editing it was still very clear and sounded good, but it did have some white noise. I do not know whether this is due to the microphone or the input on my camera, but that is an issue for me. I still give this product four stars because I am able to raise the volume when I edit footage and it does end up sounding great, it's just a little extra step. Also, I like everything else about this mike; the shock mount and the ease of use.

Did a lot of searching and reading about mikes. Eventually settled on the Azden Barrell Shotgun Mic With XLR Outputs. It seems to be well built and solid. Metal, not plastic construction. I had to by an XLR to mini stereo converter to get it to work with my Sony camcorder, the first adapter did not work, the second one works perfectly. The sound quality is not as great as I had hoped, but is definitely acceptable for my needs. It is a fairly large mike. I have also found that it is not as directional as I would have liked, picking up a lot of side noise. Otherwise, limitations aside, I think it is a good mike. - Budget - Shotgun - Azden - Film Making'


Detail Products
Detail Reviews
Click here for more information


Independent Film - shotgun, budget shotgun Independent Film - shotgun, budget

Framing Nails - bill, nails


I am not one to put down any one or any company but why would I look at this product twice when I can get the same size Plain Shank Full Head Framing Nail in a 4000 pack at Lowes for $30.00. That's over 3000 extra nails for the same price. It will be interesting to see if this review shows up. I have used this brand and see no difference then other brands for less money such as Grip Rite. I have looked at the (review guidelines) I do not own stock in any home building supply company but I would like to see my fellow tool users get the most value for there money. Price, quantity and quality go hand and hand with any product. My name is Scott I am a tool addict. Thanks for letting me share.

ADDED 5-4-2011.. Good nails but shop for the better price. DON'T BOTHER WITH HOME D. CHECK LOWES EVERYDAY PRICES B & C Eagle A312X131/22 Round Head 3-1/2-Inch by .131-Inch by 20 to 22 Degree Plastic Collated Framing Nail (500 per Box)

If you have a Porter Cable FR350, for some reason finding nails can be a slight problem. The mega home store with the orange sign has them, but not consistently. So these are a good stop-gap until you can find more.They drive well and seem to hold well.

If you are looking for the highest quality nails for your nails gun then you better get these. I have used these forever and they have performed to the highest extent the whole time. They have never jammed or messed up my guns. These are top of the line

These may be great nails, but they'll probably jam and misfire with the Porter Cable FR530 nail gun. The FR530 needs plastic-collated nails, not paper-collated like these are. I made the mistake of buying a ... case of paper-collated nails, only to have non-stop problems with them. Only on the Porter Cable website does it mention that the gun uses plastic-collated.

I used these nails in a Porter Cable round head framing nailer. They worked very well and I have not had a single misfire or jam. I can only speak from experience for the Porter Cable nailer, but highly recommend them for this particular nailer.

I would like to see a better match for the gun, and larger quantities at local store prices. The nails have yet to jam; however, the gun stops ALWAYS with about 3 to 5 nails left in gun and I just need to keep adding some more to keep gun going.

These are 16d nails that measure 3.5" ... I used these nails to frame 2x6 walls and to frame the rafters on a 20x 16 garage... these nails never jammed or misfired... have recently ordered more of these nails.. - Christianity - Nails - Bill - Hero'


Detail Products
Detail Reviews
Click here for more information


Framing Nails - bill, nails christianity Framing Nails - bill, nails

102-2564925-896 - 102-2564925-896, big and tall


I go through tees like crazy. Then I received a few of these as a Christmas present last year, and I just love them. They don't wear out after repeated washings, and the colors are just as vibrant as the day I opened the box under the Christmas tree. They're a little pricey, but when you consider that they'll last a long time and won't have to replace them right away, you'll actually be saving money! Lightweight Pocket T-shirt

I wear these shirts every day to work. In my size (3xl tall) I don't have a huge selection so it's nice that they have a good selection of colors.



When shopping for t-shirts, I'm looking for a decent quality that will stand up to many washes without fading and in particular shrinking.

I had been happy with Russell Athletic Pro-Cotton tees until they shifted production from Pakistan to India. Now a new Pro-Cotton shrinks vertically extremely quickly, is lighter weight and a magnet for pet hair. The Harbor Bay shirts are totally superior to the Pro-Cotton and well worth the price.

The shirt was the color that I wanted but I did not realize that getting a tall would put the pocket that far out of position. That is alright as I will try to fix this on my own. Other than that I was satisfied with my purchase and the process to get it.

The price was great, the t-shirts fit as promised. They were more light weight than I expected, but on me for not reading all the way. They are having a bad habit of stretching - the pocket often seems to end up at my husband's waist - but they get back into shape after washing. (This could be due to my husband's shape too.) Great product for the price. - 102-2564925-896 - Heavy Duty - Big And Tall - Workwear'


Detail Products
Detail Reviews
Click here for more information


102-2564925-896 - 102-2564925-896, big and tall workwear 102-2564925-896 - 102-2564925-896, big and tall

Multivitamin - wheat free, gluten free


I never thought I'd put a vitamin review on Amazon, but here you go. My doc carries this product in her office and recommended it to me some time ago. However, she charges full retail, so I came to Amazon. I've been using this product for a couple of months, and I highly recommend it. I never manage to take the full dose of four tablets per day, but even at 2-3 per day, the change in how I feel is noticeable. I take a lot of other supplements as well, and am VERY familiar with wild claims and such for both herbs and vitamins. This is a product that I'd stand behind happily. Get away from those grocery store pretend multi-vitamins and try this one if you're over 40. It's made for both genders... get your gender specific stuff separately and add it to a regimine that include this one.



Really, I'm that happy with it. I'm EXTREMELY fussy about such things, and even at the end of this review I'm shocked that I wrote it! But I mean every word. Add this vitamin to a healthy lifestyle, and it will be a foundational strength for those (keep them few!!) times when you just can't resist the processed yummies out there... Be well! Rainbow Light Rejuvenage 40+ Multivitamin, Food Based, Tablets, 120 tablets

I've been looking for a better way to get all the ingredients at the dosages my physician recommended in one bottle. After looking quite extensively and trying a couple brands, this product was the perfect choice...and the perfect price. I first ordered from another location but Amazon.com beat this price by almost half!

Pros: what looks like a really good mix of vitamins and other essential nutrients. Instead of taking 5-6 pills/day, you can just take this one. True, you need to take 4 of them a day, but at least it's only one brand.

Cons: Bitter. Place them in the back of your tongue to taste the bitterness less. They smell a bit like cat food, but that does not bother me. I will try to stick with it and see how I feel, and update later.

Just got this in the mail. So far it looks great. I'll update this review after using it awhile.



Two downfalls: I didn't see anywhere that you need to take four of these a day to get the full impact, so it's not as cheap as I thought, but still a decent price. #2 - it looks like this costs less to buy one at a time (120 tablets) than the subscribe and save rate. Not sure what the deal is there. Anyhow, I do plan on using this and will update review as I do. - Gluten Free - Wheat Free - Lactose Free'


Detail Products
Detail Reviews
Click here for more information


Multivitamin - wheat free, gluten free gluten free Multivitamin - wheat free, gluten free

Impact Drivers


Not long ago a friend gave me an extra DeWalt 18 volt drill he'd come into. I'd been using a 12 volt Makita for over a decade, and I was impressed with how much more torque and battery life the DeWalt had. The same friend also had a DeWalt impact driver from the same series, and again, I was impressed how well this handled mechanical tasks usually relegated to a pneumatic impact driver. But even more impressive was how well the DeWalt worked for driving screws.



A few years ago, the major cordless tool makers started to come out with impact drivers which they marketed not to mechanics, but to carpenters. While today's 18volt cordless drills do a pretty good job of driving screws, they still start to bog down when driving really long screws into hard or resinous wood. The slow, stall, and eventually overheat. But impact drivers don't do this. They work on a different principle, using a motor-driven hammer to repeatedly strike an anvil that drives the output shaft. As the load increases, they switch from spinning to a rapid-fire staccato impact mode, in which every impact turns the screw a bit farther, while the motor continues to spin and bring in cooling air.



I was very pleased to discover that Amazon had a DeWalt impact driver available in a batteryless and caseless package (for those of us who already have a charger and several batteries) for about $125. I purchased mine for a mix of yard projects- this is a great tool for driving the big screws used to tie landscape timbers together- home projects, and motorcycle/scooter maintenance. And amazingly, it's even lighter and more compact than the DEWALT DC759KA Heavy-Duty 18-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit. I'm giving away my Makita 12v drill/driver to a nephew who likes tools and gadgets, and switching 100% to the DeWalt system. Bare-Tool DEWALT DC825B 1/4-Inch 18-Volt Cordless Impact Driver (Tool Only, No Battery)

I bought this last year after my Black and Decker 18v drill died it's 3rd death. I got it in a 4 tool combo kit on sale at Lowes. I build haunted houses for the Halloween season so most of what I do construction wise is with rough and sometimes very old and hard woods. The woods are also made super tough (like rock) from a chemical that must be sprayed on them to make them fire retardant. I found that before, even with an 18v drill that screws would shear off before going into the boards which made it difficult to make secure connections in the wood. It is hard to make something look old and spooky and still have it be safe so having good, solid tools is a must. Right after I charged the battery I tried this tool out. Wow!! It drove a 3 inch deck screw into an old hardened 2x4 in the blink of an eye!! I had never used a tool like that. It quickly became a favorite of mine on the jobsite. I used it hard and it never once let me down. I bought it toward the end of the build so I only got to use it on a few hundred screws but never a disappointment. I'm looking forward to using on this season's build as well as in my volunteer work with Habitat for Humanity. I would highly recommend this tool to anyone who builds.

I bought this tool to add to my dewalt collection. I have had the 18volt dill for years and did'nt think that I need an impact driver. I was wrong. I am using the impact more that the drill for driving large screws. It make the jobs much easier. The driver was shipped by a third party and I received it in just a few days. I was very impressed. This is an excellent tool if you do lots of repair work with 2 by lumber.

I have long been a loyal DeWalt costumer, especially when in comes to cordless tools like the 18v drill I purchased 6 years ago. That drill quickly became my favorite tool and has seen constant use since. In fact I was so happy with the drill that I did not see any reason to buy an impact driver, until a couple of projects I was working on required me to drive a large number of constuction screws and lag bolts. My drill was able to drive them but not as easily or quickly as I would have liked, so I decided it was time to give the impact driver a try and my only regret it that I did not buy one sooner. This driver is by far the best power tool I have ever owned. It is absolutely necessary for driving lag screws or anything comparable but also preforms so much better in less demanding tasks like running deck screws. I have discovered that it is also quite handy for boring large holes even though that is not the intent behind the tool. If you put an Irwin Speedbore bit in this thing it will chew through 4 by lumber in no time. Using the driver for boring has saved my wrist on a number of occasions as those Speedbore bits require quite abit of torque to run and if the bit binds up while using a regular drill all that torque gets transferred to your wrist. Now that I have a set of Irwin Speedbore and Spade bits plus a decent hex drill bit set my drill is relegated to drilling metal and the occasional pilot hole.

This driver is also much better at removing rusty and stripped screws than my drill, just another unexpected bonus.

Without exception this is the one tool that goes with me to every job.'


Detail Products
Detail Reviews
Click here for more information


Impact Drivers Impact Drivers Impact Drivers

Cell Phone Headset - jabra, wired headsets


I received two of these as gifts. They both work the same, so I don't think either is defective. What I've found, though, is that when I use it with my Uniden TRU 4485 cordless phone at home, the person on the other end of the line can barely hear me. Whereas, when I use one of these headsets with my Motorola V180 cellular phone, the other party can hear me just fine. In both cases, I can hear the other party at a decent volume. The clarity of sound I hear on my end is good in both cases, as well. I've also found the headset to be lightweight, comfortable, and relatively easy to put on and take off. It also stays in my ear fairly reliably. Jabra C250 EarWave Boom Headset for 2.5mm Plugs

I've been using this headset (although mine doesn't have the call answer button like this version does) for a few years now. It's the first headset I've ever used that was comfortable and had great sound quality in both directions, and I've used it with 3 different phones over the years all with the same results. I hear people perfectly and I've never had a single comment much less a complaint about the sound quality from other people. It comes with two different size gels for your ear, and a spare of each so you're totally set. Depending on the shape of your ear you may prefer one or the other of the ear gels.



This headset is so comfortable I can wear it on my ear for hours at a time without it bothering me, and it stays snugly against my cheek and doesn't flop around in the slightest. I don't know why it has gotten some bad reviews on this site, on other sites it averages at least 4 stars with many, many reviews. Bottom line, I'd gladly pay 2 or 3 times what Amazon is charging for this headset, especially now that it has an answer call/end button on it.

I have used a number of bluetooth and wired headsets and always come back to this one. The incoming and outgoing sound quality is excellent. I have used it with both cell phones (HTC Evo Shift, Palm Pre, BlackBerry Curve) and with cordless phones (Panasonic) and the results are great. Note that you may need a 2.5mm to 3.5mm adapter to use it with your HTC Evo or iPhone, but that is cheap. I keep a couple of these in each car with adapter so that I can drive hands free.

Pros over Bluetooth:

++ No static - you can't beat wired sound.

++ No charging - it will always work when you need it.

++ Better value - I have used these for years and they keep working. My BT headsets all die after a year..if that.

++ Lightweight - fits great and works great.

I bought two of these for my Blackberry Curve 8310, wanting a reliable hands-free with a disconnect button. My phone uses a 3.5mm plug, and I thought I already had an adapter. Unfortunately the adapter I had was 3.5 to 2.5, not the other way around. This headset does not come with a plug adapter, at all. My fault. Once I bought new adapters, this headset worked well. It comes with two sizes of rubber earbuds that direct the sound from the headset earpiece, along a 90 degree angle, sideways, through a tubed hole: like those old-skool airplane headphones that tunneled sound through a plastic tube. Only, here the sound travels less than half an inch. You change which ear you use by turning the earbud around 180 degrees. The longer earbud sticks a full 1/4" into your ear, so you should be able to hear well enough no matter what. With my phone, the button on the boom disconnects the call when you hold it down, or mutes it when you depress it shortly. So far, I'm pleased. I live in LA, so now I won't get a ticket for cell phone driving. Good. - Wired Headsets - Headset - Jabra - Cell Phone Headset'


Detail Products
Detail Reviews
Click here for more information


Cell Phone Headset - jabra, wired headsets headset Cell Phone Headset - jabra, wired headsets

Accessory Kits - screen protector, accessory kits


This item is very shiny, to the point where it occasionally makes it difficult to use your Droid (especially when outdoors on a sunny day). It also shifts the color spectrum a little, and makes you feel like you're colors are just not right.



Does it do the trick? Yes.

Is it durable, easy to apply, etc.? Yes.

Is it still on my phone? No. Mirror Screen Protector for Motorola Droid Verizon

I purchased this item and never received the product.Tried to contact seller.No response. Very quick to take payment but slow to respond to errors.Totally disappointed.

I am a frequent shopper and I like shopping the website but will stop if it is impossible to receive what has been ordered.please help me to correct the error.I. really want my item!

The screen works perfectly and reacts normally with user interface. Color distortion was expected, not as bad as what I would have thought. I was hesitant to purchase due to the other buyer's reactions but I'm glad I did. No problems & great for when you go out without a mirror. No problems with the glare at all, but it also is only winter in Indiana so there isn't much to complain about with the phone.

I have mirror protectors on both my phone and my iPod. They work great as a mirror but beware that you need to put your light setting on high.



A set back of this product is that you can't see anything if you're under sunlight. Which I guess is a major set back if you're living in a sunny area. Also the colors of your screen will change slightly.

the reflective part is kool, but shows minor scratches such as car keys etc. rubbibg the screen. it does protect by taking the abuse. the clear one i had before this was great. I would not buy this again as this one reaches its end of life.

Works as described. The pre cut protector easily installed on my Droid . The only negative I have noted on this protector is that it is difficult to see in bright sunlight. This is a similar comment i have read on other mirror protectors. Since I use my device inside more then outside this is only a minor inconvenience.

Twice I tried to apply this thing, with the company being nice enough to send the replacement for 1st one and it did exactly the same thing, the instructions are not clear cause I am pretty good at doing this kind of thing and it just cracked and didnt stick again. I give up - Screen Protector - Droid Case - Accessory Kits - Droid'


Detail Products
Detail Reviews
Click here for more information


accessory kits Accessory Kits - screen protector, accessory kits