Saturday, 1 May 2010

Pet Nail Care - dremel, cordless


I purchased the short-lived previous version of this product, Dremel 765-01 Pet Nail Grooming Kit, and liked it so much that I bought the Dremel 7300-PT for friends. There are two differences between the 765 and the 7300- the casing of the 73000 is gray, and Amazon charges $29, rather than $32.



The newest version of Dremel's Pet Nail sander is well worth the money. It has changed what was previously a tortuous experience into something quick and easy.



I did some research before buying the 765 and 7300, and ended up choosing these over other products for several reasons.

PediPaws Pet Nail Trimmer- Several friends had bad experiences with it, generally finding it to be of poor quality.



Dremel 7700-02 MultiPro 7.2-Volt 20,000 RPM Two-Speed Rotary Tool with 50 Accessories- Although this is more powerful, it is also more expensive, heavier, larger, and louder, which would make it difficult to use on my nervous pet.



Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool- This is the older version of the 765; the primary difference is that this required AA batteries. Because several people complained about having battery problems I decided to go with the updated version.



I made the right choice! I have a large pitbull who has dark nails, hates having anything done to her feet, has very long quicks that are fast to bleed and slow to stop, and wiggles and refuses to stay still when she is nervous. I have tried clipping her nails, filing her nails, and even taking her on long runs on rough ground to wear them down. This is by far the best solution.



I began by letting her see and smell the sander, and then running it over her body and feet with the power off. I then turned it on and held it away from her, again letting her hear, see, and smell it. I had treats at the ready, but she was fine. I held it near her for several minutes while on, and then touched the non-sanding end to her body so that she could feel the vibration. No problems. In fact she bent down to smell it, and pinned the sanding band between her face and my hand. We both jumped, but no pain or damage to either of us. Although I was prepared to stop if she got tired or nervous, she was so good that I was able to do all four paws. It took about 15 minutes, but with lots of "good girl" and belly rubs interspersed she was fine.



The sander itself is relatively small and light, making it easy to hold even for long periods. It is easy to put together; it comes with a small wrench to put new sanding bands on. Unlike its predecessor it comes with a rechargeable battery and charger. When sanding, even on high, it is fairly quiet and vibrations are minimal. The body of the sander was warming a bit after 15 minutes, but I noticed no heat in either my dog's nails or the sanding band. In addition the battery was still going strong. My sole complaint about this product is minor; the LED light on the charger lights up to indicate a connection between the battery and the charger, but doesn't change color or go off to indicate when charging is complete. The instruction book indicates that a full charge should take approximately 3 hours, so that's what I've gone with. I had to recharge it after about the fourth or fifth use.



I gave the Dremel 7300 to a friend, and she's used it on her two German Sherpherds and her cat, with similar success



This is a great product for nervous animals and/or owners, as it's almost impossible to do damage with, and allows easy care for an oft-neglected aspect of your pet's health. Dremel 7300-PT 4.8-Volt Pet Grooming Kit

I purchased this Dremel 7300-PT for the sole purpose of trimming the nails on my very skittish Golden Retriever. She HATES to have her nails done. As soon as it arrived, I plugged in into the AC outlet to get a full charge. Although I did not use it for another week or more, when I did, it still retained a full charge. I was able to use it for nearly a half hour to trim all of our gal, Molly's, nails, using the high speed setting with no loss of power. I like the fact that this Dremel is cordless which means no cord to get tangled up in her paws! The unit is not particularly loud (even on high speed), allowing me to trim Molly's nails with minimal nervousness on her part.



I defintely recommend this particular Dremel for use on your pet's nails. Plus, it can also be used for myriad other tasks around the house, too, where a Dremel would come in handy!

Two grown dogs (50lb. Dalmation & 75lb.Flat Coat Retriever) that didn't move an inch when I used it for the first time.

I have used it three times with the same results.

One 16 week old puppy (38 lb. Flat Coat Retriever) was nervous at first and once he felt it he sat still.

Why did I wait so long to get a Dremel to trim their toenails?

What a difference from using a nail clipper.

Plenty of power. I haven't needed the higher speed.

I have used it three times on all three dogs and still does not need a re-charge.

I love it and recommend it to all dog owners.

My dog was very skittish of nail clippers and would shake and jerk every time I tried to clip his nails with a traditional nail clipper. He does wonderful with this! Trimming his nails has never been easier! I have a small dog, 13 pounds, so I ordered the Dremel 430 1/4" drum sanding mandrel and Dremel 438 1/4" 120 Grit Sanding Bands 6 Pack. I highly recommend ordering these too if you have a smaller dog since the Dremel comes with the 1/2" size which is too big for the small dogs. I would definately recommend this product!

My shepherd let me use this on him the first time I fired it up. The only thing he wanted to check out was the odor from the grinding. He has never been a big problem with clippers but would pull his foot away. That does not happen using the Dremel tool. My standard poodle took little notice either, but the groomer had used one on her. It feels substantial and well made (Mexico, not China) and it charged up quickly. The cordless design makes it easy to use as you move around the dog. I am very happy with the Dremel tool for my two larger dogs. Don't go with the very cheap TV advertised trimmer, this is a real tool, well worth the cost. - Pet Nail Care - Dremel - Pet Grooming Tool - Cordless'


Detail Products
Detail Reviews
Click here for more information


Pet Nail Care - dremel, cordless pet grooming tool Pet Nail Care - dremel, cordless

Friday, 30 April 2010

Garmin Nuvi 200 - garmin mount, dashboard mount


Of course I got a mount with my Garmin 205w, but I wanted to use it in two vehicles. I bought the extra one to use in my work truck when needed. It just makes is one less item to forget to get when transferring the unit back and forth between the two vehicles. ChargerCity GPS Garmin Nuvi Windshield ball & socket suction cup mount & Bracket unit holster bundle for Garmin nuvi 200 200W 205 205W 250 250W 255 255W 260 260W 265T 265WT 270 275T 285 285w 285t 285wt (Direct Replacement Warranty)

Beware of this product, I mounted the suction to my windshield and as soon as I put it on the suction piece broke off from the mount. I normally don't complain, but to have a product break in less than 5 minutes of having it in my hands is frustrating at best.

Do not buy anything from this seller.

My Garmin Vehicle Suction Cup Mount, which I bought from this company when it delivered it was strange that the protective foil on the holder as a stripped and restored.

When I tried to put the equipment in the same car was dropped after 2-3 minutes.

I tried to clean it and ask for another glass but again dropped.

Obviously someone has returned a product that was later sold to me.

Truly pathetic and miserable for 5-6 $

I can't really complain much because the cost (not incl shipping) was a few cents, but, MAN, they really don't make them like they used to. I'm not going to deal with it any more. I'm just going to buy a whole new friction holder/stand.

This suction mount is strongly holds in place just as well or better than the original that came with my Garmin device. The technical description on Amazon.com included a disc mount but I didn't receive a disc mount with my package. So I emailed the seller, and they promptly apologized and sent me a disc mount for the dashboard. Excellent customer service!

Item appears identical to factory unit. GPS fits perfectly into it. the factory unit "pulled" apart from the suction cup after about a year. this unit failed 4 months after purchase. Usage was occasional, at best. I have no choice but to purchase another one. hope it lasts longer though.

I had thrown away my original one, thought I would never use it. Stupid me. Anyways, I ordered this one. Was packaged in a bubble envelope, took it out, snapped the ball into the socket, suctioned it to my window, works beautifully. It's harder to get off of the window than it was to put it in there. :) - Dashboard Mount - Gps Mount - Garmin Nuvi 200 - Garmin Mount'


Detail Products
Detail Reviews
Click here for more information


Garmin Nuvi 200 - garmin mount, dashboard mount garmin mount Garmin Nuvi 200 - garmin mount, dashboard mount

Weight Watchers - health, snacks


These are delicious! They are VERY crunchy and the sea salt is not too salty, but just right. The packs are large enough to satisfy you and they are so convenient to carry with you! I love them so much, I just ordered them again! Blue Diamond Almonds 7-100 Calorie Packs-Oven Roasted Sea Salt, 4.2-Ounce Boxes (Pack of 6)

I can't get enough of these things. Thank goodness they are in 100 calorie packs, or else I would have gained 20 pounds in the last few weeks! If you are watching your calorie intake, these are great to throw in your purse in case you need something to tide you over until you can find something healthy to eat. I will purchase again! - Chips - Snacks - Weight Watchers - Health'


Detail Products
Detail Reviews
Click here for more information


Weight Watchers - health, snacks health Weight Watchers - health, snacks

Dickies Skinny Pants - dickies skinny pants, rabiah


I recently bought a pair of these for work and I love them. They are a nice blend of material (60%cotton, 40%poly); and are durably made.

The best part is that they fit really well. They ride pretty low and are long enough to not look silly with work boots on. The slash pockets lay nicely and don't pull like other brands I've had.

I'd highly recommend these if you need nice looking pants that you don't have to iron (just pull them right out of the dryer looking great!); they don't shrink; and they feel like they will wear really well. Dickies Girl Juniors' Original Low Rider Work Pant, Khaki, 9

I ordered two pairs of these pants, not knowing anything. They are a bit stiff, but the fit is perfect and not "dorky" at all like a lot of the other school uniform options for girls who are in the Jr/Ms. sizes. I will order more of these when they go on sale again.

This is a winner, my daughter attends a school that requires a uniform. The past few years I have found similar pants at the Gap, last year the Gap went really trashy, meaning very low rise and snug though the seat and legs, let me remind you this is a youth size "kids" I searched though many big box retailers and was told by another Mom that Dickies made a really fashion savvy pant that would appeal to my tween.

The size was true and the quality is spot on! It has made it though numerous washing and still looks new.

over all this is the best work pant, they are comfortable, they dont wear out and well i love these much better than i do dickies stretch pant. those are gross! if you want a pant that is going to last, not shrink and not shred these are the pants to buy. i work at a grocery store and wouldnt choose any other work pant

I have been wearing this brand and style of work pants since I was 15 and a size 5 LOL! They last a long time through many washings. The material is very wear resistant. I tried the styles with spandex and they were rags within a year. These are stiff at first, but soften up after a few washings. HARD TO FIND!

I normally wear about a size 3, but I try slightly larger sizes for work just to make sure the pants aren't too tight fitting. These, even at size 5, are very tight, and they are made from a very stiff material. So if you have a job like me that involves a lot of bending and moving, then these are probably not the pants for you.

The inseam on the size 3 juniors were 32 inches! My wife is 5' 7" and the pant leg had to be hemmed up. Likewise, don't forget these are 'girl' pants. Therefore my wife found them just a little snugger around her womanly hips. They also don't have a button, just a hook closure, so be sure to take good measurements before ordering or you'll have to exchange them like we did. - Long - Pants - Dickies Skinny Pants - Rabiah'


Detail Products
Detail Reviews
Click here for more information


Dickies Skinny Pants - dickies skinny pants, rabiah long Dickies Skinny Pants - dickies skinny pants, rabiah

Samsung Epic - sprint, cover


Overall, this is a decent protective case for the Samsung Epic. I bought this for my wife, along with a few other cases. It clips on well and fits very snug. It looks nice and she likes the color and has gotten many compliments. Some of the edges are a bit rough. Ultimately my main complaint is that the paint seems to be wearing off when she holds it and she's only had it on her Epic for a few days; it leaves a pink residue on her hands after she's used the phone for more than 5-10 minutes. Samsung SPH-D700 Epic 4G Rubberized Shield Hard Case - Hot Pink

So after filing a complaint about not receiving the correct item, having customer service bend over backwards for me, I realized I was putting the top part of the cover on upside down. The customer service was outstanding. Thankfully, no actions were taken on their part except for spending time emailing me. The cover I received is slightly different than what is pictured. I actually think what I recieved is better than the picture. I received this item in record time (in spite of all the snow storms). If you like hot pink, this is the cover for you! It is also somewhat irredescent and looks cool against the black phone.

I would love to write a review on this item but DIGIAIDS never sent it to me so i can't!!!! Pink is my favorite color so I was really looking forward to getting this cover. After 2 emails and no response from DIGIAIDS, I guess I shouldn't be looking foward to receiving this cover. Oh, I have no item to rate but I had to rate it at least 1 star in order to move to the next step. - Pink - Sprint - Samsung Epic - Cover'


Detail Products
Detail Reviews
Click here for more information


Samsung Epic - sprint, cover sprint Samsung Epic - sprint, cover

Recumbent Bikes - stationary indoor bike, exercise bike


UPDATE ON 12/27/2010. After one year of steady use, I am very pleased with the machine. In my original review (below) I reported a clicking noise, but I finally figured out that it was because the locking knob on the seat adjuster was not tightened down; once corrected the bike has been silent. It has been ridden an average of 2 1/2 hours per week. There have been absolutely no problems with the bike. My only complaints (and they're not show-stoppers) are 1) the useless book ledge, 2) the handlebars aren't usable unless you lean forward, and 3) the need for plugging the unit into an electrical outlet (rather than having a battery). Please note that I unplug my bike when it's not in use, as I expect the transformer unit would burn out much sooner if left plugged in all the time. SUMMARY: A great machine, and I highly recommend it.



The remainder of this review was written in December, 2009:



Please note that this review is written based on only ONE WEEK (Comments added 1/7/10) of use, so it can't possibly address performance over the long term. If I remember to, I'll come back in a few months and give a more complete review.



First, the machine was shipped promptly and arrived on time. The package was somewhat damaged, but all the bike parts arrived in good condition. It appears to me that the Chinese manufacturer packaged the bike for containerized shipment, and not for individual transport. Nevertheless, all was okay.



Assembly is straight-forward. I was interrupted (neighbor's horses got out), but total assembly time was probably about one hour, working alone. Note that I'm an experienced assembler, having put together many wagons, carts, bikes, trikes, etc. in the wee hours of Christmas morning. Also note that Step 5 (page 11) calls for REMOVING the seat rail bracket; the bracket on my bike WAS NOT already installed, and, not reading the instruction, I installed the bracket, as that's what the diagram suggested. No big deal, but you'll have to remove it later. Other than that glitch, all went smoothly. By the way, all the tools that you will need are included in the package - nice touch.



With only one week's use, the machine has been absolutely silent in operation; I certainly hope that continues. (ADDED 1/7/10: After a month's use, it has developed a clicking sound as I pedal.) By default, the bike starts at intensity level 3. Stepping up to level 4 is detectable but not severe. Further steps seem to increase resistance at a higher level.



I cannot grasp the front handle bars while sitting with my back against the backrest; in fact I can barely touch them with my finger tips. To grasp the handles I must lean forward. Not a biggie, but I would prefer them to be located in front of the electronic display, rather than behind it.



As to the electronic panel, it appears to me that the MPH shown is high; at 80 RPMs it registers 16 miles per hour, while my old bike showed 13 MPH. The display registers about 25 calories per mile at resistance level 4. The heart rate monitor shows about 5 beats per minute higher than my Polar unit, but I can't say for sure which one is closer.



I do not like the way the "time" feature changes between "elapsed time" and a one-minute countdown display at 6-second intervals - I would prefer it to stay on the elapsed time screen. If there is a way to reset this feature I haven't been able to find it. (ADDED 1/7/10: Press the LOCK button to keep on elapsed time and MPH.)



Also, my old bike stopped the elapsed-time clock whenever I quit pedaling, but this one continues to run - a stop to answer the doorbell reflected 5 minutes of exercise time while I was away. (ADDED 1/7/10: Press the STOP once (only once) to pause the display, and the top left button (I forget its label) to resume.)



I have not used any of the programmed workout programs, because I exercise at 78-82 RPMs for 30 minutes, varying pedal resistance during the workout (I'm a 70-year-old male, and I'm not trying to build endurance.)



The "magazine rack" is merely a small ledge. It will hold a magazine, I suppose, but I place my very small MP3 player on it. I don't believe that some of the larger players would stay on the ledge.



I knew this before I ordered the bike, so I can't really complain, but I would much prefer the display unit to be powered by a battery, as my old bike was. The Schwinn 220 must be plugged into an AC outlet - without electricity you don't get any readouts, and can't vary resistance.



The Schwinn 220 seems to be pretty stout, and my overall impression, at this point, is favorable. If it continues to function like it does now, I'll be pleased with my purchase. Time will tell. (ADDED 1/7/10: So far, so good.) Schwinn 220 Recumbent Exercise Bike

I've been searching for some time for a decent, affordable recumbent exercise bike to replace a rowing machine I'd quite using because of knee problems. It seemed the really solid ones were well over the thousand dollar mark, and the less expensive ones were... well, junk. I tried a Schwinn 240 at a local sporting goods discounter, but (1) I couldn't adjust it to fit me and (2) it wobbled and creaked as I tried to pedal it. I had about given up hope of finding an affordable unit when I tried a 220 at another discount store. It was poorly assembled, but it did fit, and pedaling it was comfortable. They could order me one and have it "just a few weeks", they assured me. I said I'd think about it.



Back home I read the Amazon reviews for the 220. Even better than the 240, said some, and it has the same 300lb rating, which means it should be just as strong. Hmm. I thought about it overnight, and decided to bite the bullet. Two days later I came home from my morning bike ride to the coffee shop to find a large cardboard box sitting on the back porch. I got out my pocket knife, opened the box, and - this is important- removed the assembly manual before doing anything else.



I studied the manual for a while- it's one of those modern multi-country ones with no text, just a lot of diagrams. Think Ikea. It was clear enough. I removed the pieces from the box and carted them upstairs one by one. Assembly was clear and straightforward, making allowances for those little production tolerances you inevitably come across in anything made in a semi-automated factory. I didn't have any of the problems some reviewers mentiopned, probably because I read the assembly manual fully and made sure I'd identified all the parts before starting. A few tips:



1. The bolts come in two types: Flat head, for attaching the feet (parts A), and round head for everything else. The round headed bolts are labeled in order of increasing length- B, D, E, F. Simple. Don't unwrap them all at once- just peel back the plastic to expose the bolts you need for the task you're working on.



2. The curved washers are for attaching screws to curved surfaces, That includes joining the front and rear assemblies together- here, the bolts are already inserted in the assemblies when you unpack- and attaching the column that holds the computer.



3. There are a number of interconnecting cables running through some of the assemblies. Most are simple mini-headphone type connectors (1/8" mini plug), but there are also a couple of flat, multi-wire connectors at the top and bottom of the column holding the computer. If you take care to align these when assembling, they'll slip together easily with little or no force.



4. Some of the cables are held in place with twist ties and rubber bands. Don't remove these ties and bands until you've connected the cables, or you're likely to lose a cable inside the machine.



5. Follow the instructions religiously. Coming up with shortcuts and "improved" methods will get you into a lot of trouble.



6. Don't tighten any bolts until you get all the bolts in for a given assembly. This is especially important when installing the seat assembly. There, tighten the bolts at the front support before tightening the bolts at the rear support.



7. The funny shaped metal piece sealed in with the bolts and washers is a screwdriver and pedal wrench. And remember: The left hand pedal has a reverse thread.



8. You'll notice that there are *two* sets of mounting holes for the seat back. Being 6'2" and having a long torso to boot, I used the lower holes in order to mount the seat back higher. You may have to experiment with this to find the best setting for you, but I'll suggest that if you're over 5'10" you start with the higher seat back position. (If more than one person will be using the machine, you may have to compromise on one position or the other.)



Once I'd studied the assembly manual and had all the pieces laid out, actual assembly took perhaps 30 minutes. I plugged in the power supply (a 9-volt wall wart), punched "Quick Start", and started pedaling. Easy. Pushing the "+" and +-+ buttons increased and decreased resistance smoothly- I found that I liked spinning at 4. I haven't tried all the programs and other settings because, frankly, I don't care about programs and automation and such. All I wanted was a knob that says harder <-> easier. But I do like some of the features, like the built in pulse monitor and the timer. Very useful. Some reviewers have complained that the front "handlebars" are too far away to reach. Those aren't handlebars; those are handles to make it easier to get up, for those users who might have some difficulties in doing so.



Short summary: This is a well made (for the money), easy to use, comfortable machine that will probably get a lot of use once the weather cools down and I can't bike every day. Until then, it'll be for rainy days. I'll update this in a few months after I get more miles in.



UPDATE:



I've been using this bike daily for a month and a half, and I'm still very pleased with it. My favorite feature? It's silent, which means I can watch TV while spinning without turning up the volume. I'll pop in a DVD from the library- usually a documentary series- and before I know it, I've done 30 minutes of solid exercise.



UPDATE II:



I've now been using the 220 daily for just over 4 months, and I'm still very pleased with it. Everything still works, none of the parts have deformed or loosened, and the foam in the seat is still stiff and supportive. My knees have strengthened to the point that my arthritis is far less of a problem than it was. I'm pleased.



UPODATE II: It's been 8 months now, and I still use it every day I can't go bicycling. One tip learned: If yours goes "clunk" on every revolution as you pedal it, the chances are extremely good that you have a loose pedal. The pedals may not appear loose, but if you snug both up with a wrench, the noise will probably go away. - Stationary Indoor Bike - Recumbent Bike - Exercise Bike - Exercise Bikes'


Detail Products
Detail Reviews
Click here for more information


Recumbent Bikes - stationary indoor bike, exercise bike recumbent bike Recumbent Bikes - stationary indoor bike, exercise bike

Rc Helicopter


Ok I did not buy this on Amazon, I got it at a local expo show and paid a little more but it is the same heli. This is a very nice helicopter and despite other reviews seems to be very durable. To give an example I have crashed numerous times, including into the ground, into a tree, a telephone pole, a steel automotive lift (the things that lift cars in mechanic shops), while I have a few dents and dings in the rotors they are still solid and it still flies. The balance bar bent as well but I just bent it back and all is well. I would call that pretty good considering some of the more high dollar helis like my friend has the rotor will shatter upon contact with a solid surface.



There is a learning curve to flying this. Just because it is a gyro copter, dont think that you can just take it out and fly with out crashing. I had a hard time getting off the ground for the first day, ground effect came in and made it go left every time. After some practice and messing with the trim tabs on day 2 I got really good at it. It is affected by wind but ALL helicopters are. This is to include real helicopters. Not something I generally bring up but in this case it might help, I use to be on a flight line with the AH-64A and AH-64D on a regular basis, I also worked on the guidance systems and weapons. Wind has a dramatic affect on a large heli so small winds can and will knock an RC to the ground. To start learning either do it on a day with no wind or find a gym/auditorium to start.



Battery time is not bad, I get about 15 minutes per charge, it takes about 2.5 hrs to recharge the battery. I just ordered 5 more batteries here on amazon so that I can get about an hour or more of play time before having to wait on a charge. Overall I am satisfied with the purchase and actually am going to get one for my buddy who paid over 400 on his Pro heli that is too hard to get off the ground. I figure use these a learning tool then get to the bigger more advanced 4 - 6 channel helis.



Again just a suggestion, but get good with it at about 1.5 - 2 ft off the ground first. Its harder to fly closer to the ground because of ground effects so if you can get good close to the ground you should have no problems higher in the air. Newest DH 9053 26 Inches Volitation 3.5 Channel Outdoor Metal Gyro RC Helicopter

I have been flying the Double Horse 9053 for some time now and it seems to fly just fine. It does fly best on on a calm day but most of the Dual rotor helis are. It has been very fun to fly. Parts are easly available.Updated Balance Bar For The Double Horse 9053 Gyro Helicopter

I am an experienced Heli pilot and I wanted something that would do well outside. Given the size of this very large helicopter, it is impractical to fly inside a normal sized house. As others have commented, it there is any breeze outside, this helicopter will struggle to stay under control. Unlike some of the other reviews, I did not find it very durable. While flying it outside, a gust of wind caused it to crash on soccer field. The canopy tore, and the outer shaft actually bent. Some of the plastic parts holding the canopy together also broke. I would loved to have tried it in a gym, I bet it would have faired better there. So in summary, too big to fly indoors in my house. Too hard to control outside if there is the slightest breeze. Not as durable as most of the Mini Helicopters and one crash bent the outer shaft and tore the canopy.

Double Horse 9053 has many problems starting with the top and bottom blades, Don't take this out on a lite winded day or you will be bring back whats left after it hits the ground given that this big 450 size outdoor helicopter needs a non windy day to fly it.The blade are not stiff enough to hold it in the air without hitting each other. I have ordered parts twice Blades and blade grip set. can't keep wasting money. When Purchased the new blade grip set for the DH 9053 it was just as thin as the one that broke, Need to use a lite weight metal or carbon for parts.The tail end of heli is heavy, Tail blades could be better don't produce enough lift even when you put it in fast mode. This big metal bird gets off the ground pretty well but the 2-motors that powers the blades are easily over worked making them too hot to touch and can also burn out the circuit board. Battery needs improving. There are a lot of customer Mods you can see on Youtube, If you already have the DH9053 learn from it and move up a class or two. Double Horse just came out with the DH 9100 a Single blade set up and a very nice tail Assembly that controls direction and a servo for forward fight. looks to be more bang for my bucks. Will let you guys Know.

OK first I'd like to start by informing folks I am not new to thee sport of RC Heli's. So with that being said, I want to let you all know I have many hours into this hobby from Nitro to 3D. I bought this to basically have fun and not care if I crash it or not LOL. Out of the box this is not an easy toy to fly. I definitely would say no to a beginners choice. It is tail heavy has serious rotor strike issues which do cause it to crash and it is large enough to hurt some one or household pets.



I modified it right off. This is my preference and do not recommend you do this as it voids your warranty. And also can make the toy extremely hard to control if you are not at least a Novice pilot. After my mods it is very agile and fast. It maneuvers with lightening speed as well. However as stated I so not recommend modifications of any type nor are they endorsed by and manufacturer or Amazon itself. If you want to mid yours there are numerous videos on You Tube to watch and I will be adding one of my own soon. as well as flights with the Volition.



At the price I paid for this gem it is worth every penny if you do not mind some mod work and be sure to get extra main blades and a few tail blades. I also will tell you one mod requires a pair of connect buckles and a balance shaft from an 9077. this eliminates most of the blade strike and is shorter and lighter.



my user ID on You tube is nhsledfreak: look for the video soon within the next few weeks I hope too have one up to show you this heli can be made to fly stable and fast or slow and have lots of fun doing so.'


Detail Products
Detail Reviews
Click here for more information


Rc Helicopter Rc Helicopter Rc Helicopter