Wednesday, 10 August 2011

Single Automatic Watch Winder


I needed a single automatic watch winder and didn't want to spend a lot. This fit the bill in that regard. However, it's performance is inconsistent. I have to fiddle with the plug every time I put the watch in it to make sure it runs. If I don't, there's a good chance it's not going to work right. I would spend a little more and get a different automatic watch winder unless you like having to remember to play with the plug every day. Burgundy color single automatic watch winder.

I got this to keep my Rolex wound when I went on vacation. I have a knock-around watch I use when I am out of the country and I know it is bad to let a self-winding watch stop as the oil pools and other bad things can happen.



I was a little concerned because it was so cheap, but when I got it and tried it out it was perfect. They do recommend getting a power timer and having it only run 4 hours a day to keep it from overwinding . . . since one of those outlet times are less than $5, not a big deal. To get one that was completely automatic would have cost 3 times what this one does.



It is completely silent, so you could have it in your bedroom. It only goes one direction, either clock-wise or counter. I consulted with my Rolex expert and he said either would work . . . also said that it was impossible to overwind any Rolex made after 1972 as they put in a safety system that stops it from winding more than the spring can take.



This is a good buy.

I have had this so called watch winder for about 3 weeks now and I have to say it is a piece of junk. I have tried to put the watch in the winder at night before I go to bed, I've tried to leave it in the winder for a week at a time and no matter which way I do it the watch is never wound enough for the watch to continue running more then a few hours. I still have to hand shake the watch 100 to 200 times for it to continue running. I guess the old adage is correct "you get what you pay for". Do not buy this product, you'll be sorry.



Signed,

Extremely Unhappy!!

I have a Seiko kinetic watch. It had completed decharged because I had no worn it for months and I didn't realize that my old winder had quit working. After wearing it for one day it had built up a 'five' second charge (by this I mean when the test button was pushed the second hand move five seconds). After two days in this winder it was nearly discharged as indicated by the second hand doing two second jumps.



DO NOT BUY THIS WINDER if you own a Seiko Kinetic watch. IT DOES NOT WORK! Worse, it does not say this in the description.



For those who can use the winder please be aware that it does not have MULTI-settings... it has one switch with clockwise, counter-clockwise and off positions. That to my mind is TWO setting and TWO does not equal MULTI.

I chose this watch winder because it was the cheapest I could find. You get what you pay for. Sometimes it works, sometimes it does not. I find that I have to keep unplugging it and then plugging it back in to get it to work. In retrospect, I think I should have spent a little more on a nicer, more reliable model. If you haven't figured it out from my review so far, you should pass on this item.

I purchased a couple of these several months ago. One continues to run but the other recently stopped working. Switched power supplies but it didn't help. It's getting power just no longer works. It's a cheap product so that's why it doesn't cost much. I'm not sure if I recommend it or not. Obviously, you're taking a chance. Had I known I would have spent $60 on a better quality winder. Hindsight is 20-20.

This is the first winder I have purchased and I did not want to spend a lot of money. The winder is nice looking although it is plastic. It serves it's purpose well. It is easy to use and does a nice job keep my automatic running when I am not wearing. For the price I paid it is hard to beat.

I've been using this winder for the past month and thus far it has performed well. It is very quiet and runs 1 hour on and 3 hours off cycles that have kept my automatics watches wound and ready to go. Unit arrived quickly and well packaged. Only time will tell about overall durability but at this point it is a keeper.'


Detail Products
Detail Reviews
Click here for more information


Single Automatic Watch Winder Single Automatic Watch Winder Single Automatic Watch Winder

Argyle - htc thunderbolt screen protector, hard case


Got in the mail yesterday and fitting like a glove today bought one before for the droid x and its still up there almost a year later for ten bucks with this company you'll win every time!!!!......For people who messed up their phone????????? dont submerge the phone with the spray just a couple squirts and some on your fingertips....all you need .........great product will buy for EVERY phone in the future!! Skinomi TechSkin - Screen Protector Shield for HTC ThunderBolt + LIFETIME REPLACEMENTS

I was a little skeptical at first. Other reviewers made it seem like putting this on was like a form of brain surgery. Overall pleasantly surprised though. Let me hit the high points:



1)Beautiful packaging. At first it's a little overwhelming (all this for a simple screen protector?!?!?!) but, so long as you follow the directions, it all makes sense.



2) As to the application of the product. Went on like a charm, despite the fact that it looked like imminent disaster. You do need to follow the directions to a T. Moisten your fingers, and when they say "spray entire screen protector) they do mean FRONT and BACK. That's key.



3) Initial application did have bubbles and streaks despite my best efforts but like they promised, all of the initial wrinkles, bubbles etc disappeared after about 3 days! You do need to leave the phone alone for about 18 hours after application.



So all in all a great product. Here are my gripes though: 1) No lens cloth in the package! You will need one. Actually 2. Preferably like the disposable Zeiss Optics ones. 2) In certain specific kinds of light the screen protector has a little bit of a haze/wave that is slightly distracting. But it's a very limited issue. 3) The reason only 4 starts was that there is about a 10%% reduction in sensitivity to the touch pad as a result of this screen protector. In all honestly that is both good and bad. It makes certain keys (like the phone button) less sensitive but for games (i.e. Angry Birds) you have to be a little more deliberate about your movements then normal.



All in all a good product, went on like a charm. I've tried others and this is the best. Recommended!

Ordered this after reading the great reviews for it on the internet. The application went without a hitch and the screen protector looked great. Great clarity, no bubbles, and was exactly what was said about it on the internet. The problem with the screen protector is that it was not what I thought I was getting.



I must be rough on my phone, hence why I ordered a screen protector in the first place, and place it in my pocket with all sorts of other sharp things like keys and a spare battery. I had waited the suggested 24 hours before using the phone and placed it in my pocket as usual. To my dismay when I looked at the phone at the end of the day.....the screen protector looked like it had been snagged and stretched in places and was no longer flat and nice. The stretch marks became more and more pronounced and quantity the longer I used the phone and kept it in my pocket. The screen protector was never cut or pierced but "stretched" and wrinkled.



I did not want a screen protector that would mar itself with stretch marks. The stretch marks were very noticeable and were beginning to effect the clarity of the screen after just a few days.



What I wanted was a screen protector which would protect the screen and also not mar itself in the process. I think the Skinomi is just a little bit too flexible for my use. It is a good product if you dont abuse your phone, the installation was straight forward, and initial results great.



Just not my cup of tea. I ordered some screen protectors from Steinheil, which is a dry install, and made of a much harder material. I think these are going to serve my purpose much better. A little more money but you do get two for the price. Time will tell.

I say I was a bit reserved about this product until I tried it. This skin is amazing and they will have more of my business in the near future. I messed up the first time I tried to apply it and the great thing was you get a redo, just follow the instructions and a few days it is like its not even there. Bravo guys! - Htc - Hard Case - Htc Thunderbolt Screen Protector - Thunderbolt Screen Protector'


Detail Products
Detail Reviews
Click here for more information


Argyle - htc thunderbolt screen protector, hard case htc thunderbolt screen protector Argyle - htc thunderbolt screen protector, hard case

Ipad 2 Accessories - apple ipad 2, ipad 2 leather


It's not fancy nor expensive, but it's exactly what I wanted.



It protects my iPad 2 wonderfully, and it's a great fit. Both cameras, all controls, headphone jack and speaker are accounted for in the design, and I don't think I'll ever have to take it out of this well-designed case.



If you're like me and would rather buy a sensible case without paying the premium for an Apple logo, this is a good choice. CaseCrown Apple iPad 2 Bold Standby case (Black) for the Apple iPad 2 Wifi / 3G Model 16GB, 32GB, 64GB

Just received the Casecrown Apple IPad 2 case, and it is perfect for my Ipad 2. First off it fits like a glove, and has a very solid feel. It also turns on/off the IPad when you open and close it. I've tried several cases, including the colored cases that Apple sells, but if you are looking for real protection, your better off buying this case.

Let's put this to rest...The magnets in the cover do put the iPad 2 to sleep and wake it. That is the first thing I noticed. Don't believe me? Put a passlock on the the iPad and close the cover. Immediately open the cover, and the iPad requires you to enter the password since it was brought out of sleep.



For the case itself, it is a nicely engineered and functions as expected. No harsh smells either. I haven't found a case equal to this one in the same price range.



A+ for value. Now my $600 tool/toy can be safely transported and used.

Yoobao Executive Leather...188g....leather..........kickstand

CaseCrown Bold Standby.....226g....faux leather...kickstand

BearMotion Leather:...........291g....leather .........kickstand

SwitchEasy Canvas:...........392g...."canvas".......3 grooves



I've tested the 4 cases above with an iPad2. Each is a portfolio case. You can find reviews of each online. I found good video reviews of each except Bear.



Three of these are "kickstand" cases. That is, the cover folds back and slips into a notch (the "kickstand") which holds the cover in a certain way that creates a stand. One case (SwitchEasy) doesn't use the kickstand but instead has grooves on the inside cover which the side of the case can slide into to create a stand.



All cases had magnets on the cover that turned the iPad on/off. This function worked well with all of them. Also, none of them had any problem with the magnets turning the case off if you flipped the cover around back, as some of other cases do (I had the latest version of the Yoobao, which apparently fixed that problem in an earlier version).



The Bear Motion was my favorite. The review below goes from lightest to heaviest.



YOOBAO EXECUTIVE. A glove for the iPad that was just a bit too flimsy for me.

Pros:

Very light. By far the lightest. It is basically a thin leather glove that goes around the iPad, and then a thin leather portfolio cover. You barely noticed the extra weight/bulk.



Cons:

1. Though made well, I didn't think it lived up to the vaunted reports of "Yoobao quality" that some other reviewers mentioned. A few of the holes on top were slightly off, and I wasn't really impressed with the look of the black leather and the off-white stitching.

2. The kickstand worked, but not as well as the other two kickstand cases in this review. Because the Yoobao is so light and thin, the cover would slip out of the kickstand notch sometimes if you were moving it around in your lap or in bed. No problem of course if it was static, like on a table.

3. Most annoying to me, the cover magnets were not strong enough to keep the cover closed if you turned it upside down or just grabbed it to carry it a certain way. In other words, the flap would flap open, turning the thing on and then off again when it flapped closed. It seemed to do this every time I picked it up.

4. It offers only a very thin layer between your iPad and the outside world (not a con for me but perhaps for others). It's fine for walking into a meeting or putting in your briefcase. But if you were concerned about the iPad getting banged around and wanted serious protection, it's not the case for you (particularly with the flap issue noted above).



CASECROWN BOLD STANDBY - A well made faux leather case. My runner-up. It is very close in design to the Bear

Pros:

1. least expensive of the lot

2. well made, everything works.

3. second lightest, while giving almost as much protection as the heavier models. Indeed, I would say it's got the best weight and bulk of the 4.

4. faux leather is actually quite nice. Unless closely inspected, hard to tell it's not the real thing. It looks smart.



Cons:

1. The volume buttons are just a tad difficult to reach, you have to kind of push your way in there. (The Bear has a bit of this but it's so slight as not to be an issue.)

2. After handling the Bear leather case, you can kind of tell the CaseCrown is not real leather when it's in your hands. It's just something I noticed. You might not.

3. Perhaps because of its lighter weight and bulk, or its build quality, it's just a bit looser and flimsier than the Bear. This might not sound like much, but over time it started to annoy me. For instance, when you flipped the cover behind the iPad to hold it open, or when you put it in its kickstand to create a stand, the cover had a "looseness" not found in the heavier cases. That is, it would come off its stand, or would flop around a bit, or otherwise just feel a bit loose and cheap. Another minor example is that the cover, while it always worked to turn the iPad off when you closed it, sometimes didn't line up exactly with the edges of the screen the way it did with all the other cases. These examples may seem minor, and perhaps they are, but as I say, after experiencing the feel of the Bear - the looseness of the CaseCrown started to bug me.



BEAR MOTION LEATHER. A really well made leather case. My first choice. It is very close in design to the CaseCrown.

Pros:

1. To me, had the best overall "Feel". Fine leather and acceptable weight. The Bear is 100g heavier than the Yoobao, which to my hand felt acceptable. In contrast, the SwitchEasy is 100g heavier than the Bear and, again, to my taste, was just 100g too much - see discussion of SwitchEasy below). The CaseCrown is similar to the Bear but a bit lighter and cheaper (see below)

2. The case was sturdy and offered good protection all around. It of course offered more protection than the Yoobao. It also perhaps had a bit more than CaseCrown (because it was a bit thicker, but they were more or less comparable) and a bit less than SwitchEasy. It was light enough to carry into a meeting but sturdy enough to throw in a knapsack an feel it was secure.

3. The magnets work flawlessly, closed with a "snap" and kept it closed until you wanted to open it. Best magnets of the lot.

4. The stand worked very well. The best of the kickstand cases, probably because, again, the leather was thicker than with the other two and so everything just stayed in place a bit more.



Cons: All these "cons" are very much a matter of personal taste

1. It's probably about average weight for these things but just slightly heavier than I'd like. If I had my druthers, the weight and thinness of the CaseCrown would be what I wanted, coupled with the quality and sturdiness of the Bear.

2. It's the least "cool" looking of the 4 cases. It's just a conservative black leather case, with no real "flash". SwitchEasy is by far the coolest looking. The Yoobao might also be viewed by some as cool though I personally didn't like it so much. The CaseCrown and Bear are similar, but CC probably edges out the Bear in that the Bear is a bit thicker and boxier.

3. The leather covers almost all of the black borders of the screen. The other two kickstand cases left a bit more black exposed, which I preferred aesthetically, and the SwitchEasy leaves all of it showing (which, again, looks cool). I couldn't find anything functionally wrong with this. Although one reviewer mentioned that it might get in the way of certain programs where you had to swipe to the edge of the screen, I didn't have that experience.



SWITCHEASY CANVAS - A cool, innovative case but for me, a bit too much bulk.

Pros:

1. Exceptionally well made. The strongest and sturdiest of the bunch, probably offering the most protection.

3. The grooves worked well as a stand, though because I use the iPad a lot in bed and on the couch, I think I may prefer the kickstand system, though it really is a matter of taste.

2. To my eye, a very cool looking case, the coolest of the bunch. The "canvas" isn't canvas but some high tech material. The material and design were top notch. I also loved the way the iPad was held in the plastic shell backing so that - unlike the other three - the whole of the screen was uncovered (black border and all).



Cons:

1. Too heavy. This is of course a matter of taste. I tried it for days and really wanted to prefer it, but in the end the heaviness (and the cover issue discussed below) just started to get to me. As I mentioned above, it's just 100g heavier than the Bear but that was 100g too much. I'm a strong adult male. I carry around a laptop in my briefcase all the time. But I wanted my iPad light, and this just made it a bit too heavy for me.

2. Too bulky. Related to the above and, as above, a matter of taste. To me, just a bit too much thickness when you were actually holding it and, for instance, folding the flap back around behind it to work with the screen.

3. The cover. The cover has magnets, which worked fine, but it also has a curved extension that bends over the side and kind of clicks it closed. This extension bugged me. It didn't easily close. You kind of had to push and force it over the side (if you didn't do this, the magnets wouldn't connect and turn the thing off, and the cover would not be secured. I suspect it may have worn in over time, but I used it on and off for a week and it was always a bit of a chore to actually open and close the thing. This really got to be annoying, particularly compared to the others that so effortlessly opened and closed.

4. Since it uses a "groove" rather than "kickstand" design, you had to kind of pull part of the iPad off of the back base (where it was held by Velcro) to put it in the grooves and stand it up. Not a big deal but, again, just an added bit of work that the other cases didn't have. Over time, this annoyed me a bit.

5. I loved the material, but even with the black version that I had, I felt it might start showing stains, hand sweat, etc. over time in ways the leather and faux leather cases wouldn't. However, I'm not sure of this and so it may be an unfair comment.



SUMMATION:

I ended up taking the BearMotion because of build quality, functionality, hand feel and acceptable weight. I wish it had been slightly lighter and thinner (like the CaseCrown) while keeping its build quality/feel (which was better than the CaseCrown) - and of course if it looked a bit cooler -- but I felt for me it was the best of the lot. The CaseCrown was the runner up but ultimately, the feel and quality of the Bear won me over, beating out the slightly lighter, slightly trimmer, slightly cheaper, CaseCrown. The SwitchEasy is a great case, but just too big and bulky for me, and the cover clip bugged me. I didn't like the Yoobao's because it's overall look didn't work for me and, most importantly, the cover flap came open whenever it was tilted. The lightness was a great asset though and the protection it offered would have been enough for me if other factors had been more appealing.



Hope that helps! - Apple Ipad 2 - Ipad 2 Leather - Ipad 2 Case - Ipad 2 Accessories'


Detail Products
Detail Reviews
Click here for more information


Ipad 2 Accessories - apple ipad 2, ipad 2 leather ipad 2 case Ipad 2 Accessories - apple ipad 2, ipad 2 leather

18 Inch Laptop Case


I had bought a new Qosmio X505 laptop with an 18.4 inch screen and needed a larger case. This case works great. It's easily large enough for the laptop as well as all the various peripherals. The bag itself has a nice feel.



A great buy. Case Logic VNC-218 18-Inch Laptop Case (Black)

A few weeks of toting the bag with a 16 inch laptop and some papers have torn the handles. For a product designed to carry large laptops I would have thought weight would be taken into account. I would have rather liked a warning on how much (or little) weight the handles would take before purchasing the product.

I am looking for bags for my 18 inch laptop and found this one in the store. I am glad that I inspected it. It has padding on the front, back, top and side. But NO PADDING ON THE BOTTOM...



You would think that the most important place to add padding, would have it. But NO. This bag is NOT padded on the bottom.



If you own one and set it down to hard. I hope that you backed up your data..

I needed a lighter more compact case for my Alienware M17XR2. This massive lap top weights over 12lbs not including the 2lb power brick. Unlike the oversized Alienware bag with its multiple pockets, and areas, The Case Logic case has one main area for the laptop and a zippered area for thinner components like the power brick. For local transportation when I only need the laptop, brick, mouse and a few CD's this case is perfect. The zippers are strong, the material is strong and there is sufficient padding. The case is very light weight, which is what I wanted. Easy to carry with the shoulder strap which I rarely use since it is so easy to use the handle. I will use the BIG Alienware bag for long road trips or air travel. But for around the town transport the Case Logic is a perfect choice for me.'


Detail Products
Detail Reviews
Click here for more information


Communication - light, weather


On newsgroups and message boards, this handy and compact little radio is being touted as a good choice for beginning shortwave listeners: but I would disagree. As usual for the current line of low-end Grundig products, the "single conversion" intermediate frequency design has resulted in serious image problems: in other words, you pick up a single strong station at two, or sometimes three, places on the dial: in the correct location at the intended frequency, plus one or two spurious images above and below it. In the crowded shortwave bands, this makes listening extremely difficult, as the images cause wobbling whistles and lots of interference (and make it hard to even know WHERE the radio is tuned.) In addition, the planetary tuning mechanism has really dreadful backlash: to tune in a shortwave station, you have to go past it, then back up and tune around until you *finally* get it centered. Then, the radio drifts and a few minutes later you are forced to do it all over again: maddening.AM (called mediumwave in Europe and much of the world) is more satisfying as the stations are not crowded together as much as shortwave, and the band is shorter so there is more spread from one end to the other: the tuning isn't nearly as critical. Selectivity is pretty good, and sensitivity is excellent. I have not noticed image problems that are as troublesome as in the SW bands. FM reception was disappointing; selectivity seems poor, and sensitivity rather low. Stations "mush" together -- if they can be picked up at all. Expect only the strongest signals in your reception area.The generator system works very well though a trio of new AA cells gives more output and slightly better sensitivity.I tried six units and found that performance varied slightly. One brand new radio had a weak set of batteries that would not charge correctly; another had extremely tinny sound that lacked fullness (surprising to me but probably due to a poor speaker or bad audio capacitor.) A couple of the sets weren't as sensitive as others. So quality control apparently varies somewhat.The unit I purchased is very satisfactory as a simple emergency and/or AM broadcast receiver, though not much useful for FM or shortwave. But it sounds a bit better than pocket sets, and definitely outperforms most of them in terms of AM sensitivity. (I am a retired broadcast station chief engineer in the SF bay area, with fifty years experience as a shortwave listener.) Grundig FR200 Emergency Radio

From reading the other reviews, I see most people love this radio, but some dog it. They're both right. Your level of satisfaction with this radio will have more to do with your buying motivations than the product.



Grundig has a well established reputation for making fine products. If you are a shortwave enthusiast who is looking for a good shortwave radio, sadly I must admit that you need to keep looking. The tuner is iffy (by your standards) and it does not have the 'Grundig Feel' of their more expensive products.



But notice Grudig calls it an 'Emergency Radio,' not a shortwave radio.



If you want something for peace of mind -that you will never be caught without a radio because of dead batteries- then this is a great product. I live in a hurricane zone and every time there is a storm approaching, all my friends wait in long lines to buy batteries. I know I'm ready 24/7. As an added bonus I'll always have a flashlight with me. (which is more handy than I would have guessed)



(Here is the kicker-) If you want an emergency radio AND you like to listen to the BBC or Radio Canada every once in a while, then this is definitely the product for you.



I've had mine for a year and a half and I use it at least 3 times per week. The best way to describe the tuner is "credible." It can pick up all the big name stations, even indoors, but it is not stunning. The tonal quality is acceptable but I'm usually listening to the spoken word and not music. (I have an iPod for that ;-)



I bought it because I wanted a cheap shortwave. The fact it had a crank and a flashlight was gravy at first, but it is more and more important as I use it.



Some notes about the battery:



You'll never turn the hand crank enough to fully charge the internal battery. I have a fancy NiCad charger so I charged the battery fully and it lasted 6 weeks of near daily use during Gulf War II. (I'd guess 120+ hours, I was amazed) Problem is, your arm would fall off before you got there. Even if you don't give it a full charge, I find the cranking to listening ratio pretty good.



But do what I do- I run it on NIMH AA's and it lasts for weeks. I never pay for batteries but I never have to crank it either. (unless the batteries die)



And a final thought on durability which some people discuss.



I've dropped mine several times even once from about 6 feet up while I was painting. I have one scratch on it but other than that, it really does look much like the day I bought it. The case is still tight and the controls firm. I give it to my 6 year old nephew and he cranks for hours with no ill effect. I'd say durability is quite good.



I hope this review helps you get a feel for the radio. If your needs come even close to matching what this radio was designed to do, then I feel confident it will exceed your expectations in the long run.



=====Update=======



Well, 2 years -and Hurricane Katrina later- I'll never be without this radio. We left town 2 days before the storm and I brought it with me. At night I could pick up WWL radio (50,000 watt clear channel) from Memphis.



My nephew (who I mentioned above) broke the antenna off for me so no shortwave for me any more but AM/FM works fine... That was homicide, don't blame the radio. It's now approaching 4 years old, I still use it weekly and it is still in good shape otherwise.



BTW- I came back in town just a few days after the storm to rescue some friends' pets and help get some people out of town. I brought extra gas, extra water, 5 days of food and this radio. That probably say it all. - Emergency - Radio - Weather - Light'


Detail Products
Detail Reviews
Click here for more information


External Enclosure - external hard drive, hd enclosure


I recently purchased this unit to be used with a SATA hard drive. Upon receiving it yesterday I discovered it only has an IDE style connector.



I called Coolmax's tech support number, and was told that this unit was originally manufacturered in an IDE version, but they have since changed it over to a SATA interface, without changing the model number. (Nice, huh?) Apparently there are both versions floating around in the marketplace, and they even have the identical UPC bar code number. Coolmax tech support offered to ground ship me a different front face plate, to convert my unit over to SATA. But who knows how long that is going to take?



If you read Amazon's product description for this unit (as of June 19, 2008) it says "SATA" in the title, but says "Interface: IDE" buried in the description.



Since my Amazon order was placed through TigerDirect, I also contacted them to see what they might be able to do for me. They said their notes also indicate that some folks who wanted the IDE interface received the SATA instead. He said I could return my unit and reorder a new one, but there is still no guarantee which version I would receive the second time around.



So if you place an order for this unit, be forewarned you have no control over which interface you will receive. There are alternative products you could buy instead, and save yourself the potential aggrevation.



+++ Update Edit: After about five days I did receive the replacement panel from Coolmax. However, because of panel connection differences, the hard drive position inside the enclosure is different, and I had to drill four new holes in the aluminum box for mounting it. I'm up and running, but much more grief than necessary. Also, I see Amazon has now removed the previously mentioned IDE reference in the product description. Coolmax HD-389-U2 3.5IN Sata External Encl with USB2.0 Connection

First, the good part. It installs easily, and works right away. So, if you want a cheap enclosure for a drive that you want to salvage form that old computer that you are about to throw away - it maybe exactly what you are looking for.



Now, for the disappointments. The biggest one is that it intermittently disconnects and reconnects - every 5-10 minutes. Often in the middle of I/O operations. Even during windows backup I hear click (off) and a few seconds later click again (on). Windows backup reports "backup couldn't complete. Write error". Usually, after 10-15GB of writing. Once it ran all the way to 80GB; but I was never able to finish the backup.



Among smaller annoyances:

The light only indicates that it is plugged in - not whether it's on or off. weird. Also, it is in the back - it's hard to see in typical setup. But since it's useless - it doesn't matter where it is.

The cable is A-A, so if you lose it (or if the one that comes with it is two short) - it's not easy to grab a more typical A-B. Although if you need to buy one - the cost of A-A and A-B is about the same.

Windows reports that I am plugging it into USB 1.1 port and that I can benefit from using USB 2.0. No other USB device plugged into this port produces this message (other USB drive, WebCam, USB mouse - nothing).

Support is atrocious. First few emails got auto-generated response; then the live person came on, and blamed motherboard, USB drivers, Windows, California fires, but wasn't even considering troubleshooting the enclosure itself. Well, I guess for under $20 it's a gamble.

I really wanted to like this product. I spent money on it and wanted it to work. But, after many months of dealing with its problems, I've decided to break up with it. I used this enclosure on a Linux Ubuntu system and downloaded and stored media on it. However, the enclosure would cause my hard drive to freeze up every few hours and it would drop connection frequently. I thought my hard drive or my computer was at fault for the longest time, failing to admit that this enclosure was terrible.



After a couple of months of poor performance, I started to get suspicious about this enclosure and e-mailed their support team. They offered one word responses and were not helpful at all, claiming that there was a "bug in Linux" and that I should "update my Linux" or "call Linux support" (as if they were a company to call). They seemed to have no idea how to offer tech support. I started to question their product and decided to order another enclosure from another company. After a week with my new enclosure, I realize that this product was completely to blame for all of the troubles I have had over the past three months with it. The new enclosure works perfectly and offers no problems at all.



I fully recommend not buying this product or anything from this company. Poor construction, poor product, poor performance, poor support. Bad all around. - Sata - External Hard Drive - Hd Enclosure - External Enclosure'


Detail Products
Detail Reviews
Click here for more information


Brother Labeling Tape


This is a good printer for someone looking to customize their labels with designs, upside down/right side up, reverse color and other fancy tricks. For business purposes, I'd recommend a printer that takes larger interchangable tapes and less gimmicks. Maximum tape size is 1/2" so dual line print is very small. Keyboard is very tiny, will be limited to two finger typing only. Has two fonts (Bohemia and Helsenki) but can alter with three sizes, three widths and nine stypes (bold, vertical, underline, shadow, hearts or stars, etc.) Emphasizes Deco Mode which does very fancy printing but wouldn't be used in a standard business setting. Nice compact size so can be carried around easily. AC power supply is an optional accessory ($19) so may want to factor that into purchase, otherwise uses six AAA batteries. Brother PT1290 Home and Office Labeler

I got this as a gift for my parents - they will probably not use all the fancy features like the graphics you can add with this laber. It comes with one cartridge so you may want to add a few more.



My likes about the p-touch system:



1 - labels last a long time but not forever

2 - colors are available and easy to switch out

3 - conservative on the batteries

4 - compact and nice form factor like a typewriter but smaller - I have 2 other smaller P-touch labelers that go in my trucks for labeling cables and wires - very handy at times.

5 - added fancy graphics features on this model - my small ptouch system is only good for perhaps drawing a box around text, these get pretty fancy

6 - new label design has a split down the middle making removal of the new backing easier - prior labels were troublesome to remove the backing.



I bought this for my dad who turned 75. If he can use it, I think most any age person can get more organized. We find unusual uses for the labels it prints - some are used not only to identify property but also to hold on the battery door on a flimsy product. Others are used to annotate a spreadsheet of medications with a new one before giving it to a new doctor. The uses just keep showing up for the product!



I bought mine during the fast and furious sale which closed out in 5 seconds - as did the next model up with a usb interface. The graphicss are minimal on this but add a nice touch to someone who is beginning scrapping or wants a simple, easy to use low cost label. For serious graphics you will want the pc version. For my dad, this will do fine.



I labeled some outdoor stuff that faded out after a while (3 years) so do note that p-touch labels expire with sunlight.



Lastly, the features are well made such that the cover can be removed fast and replaced without any lost screws or broken snaps. This has always been a brother p-touch feature that I appreciate from my truck labelers which get the tape color changed frequently - it's matter of opening the door and replacing the cartridge - no fancy stuff and can be done one handed. Without that design feature you could easily have a product that breaks far too soon. My 2 other p-touch labelers that are 7 years old and have been dropped off ladders at worksites - still run fine. Its a quality product that will serve many purposes for a long life, which is why dad got one. UPDATE - 1 year later his is still on the first set of batteries and running strong!

This is a great little label maker. It has some great options including adding fun symbols and shapes like hearts, stars and different fonts to your labels. I've used it to label glass containers in our pantry for baking items and love the neat and easy to read look of it. Very user friendly and easy way to keep things organized. Of course like all label makers I've used, it seems to use up more tape than I'd like but this one offers a great solution by giving you the "narrow margin" option. This avoids the extra inch margin on either end of your label. Great! I find myself looking for things to label just so I can use this labeler.

The extra space at the front of the label is definitely an issue for me. If you set margins to "Narrow" there is minimal space after the text but you still have 1" at the front so the text is not centered. The best way to save tape it to put it on "Chain Print" and print multiple labels at a time. Nonetheless, you still have to use a scissors to trim all the labels and that is a pain.

This labeler seems to print pretty decent labels. My main beef is that it insists on using up at least one inch of blank tape at the beginning of every label, even when using the "narrow" margin setting and the smallest font and font width. (The end margin does get smaller on this "narrow" setting, but you'll need to cut the excess at the beginning with scissors if you want the label centered). I find this incredibly wasteful and infuriating. Is Brother just trying to sell more of this pricey tape?



Some other minor issues: some things that should be doable with one button press take many (like clearing a line); and some settings need to be repeatedly set every time instead of becoming the default once you set them. Also the font's can get a little blocky looking when using certain sizes or the narrow or wide widths. (I've returned this labeler already so i can't remember the specifics on the last 2 points).'


Detail Products
Detail Reviews
Click here for more information