Monday, 7 February 2011

Strength Training


I'm a fifty year-old guy who's long been more into cardio workouts than weights. Sure, I might do a half-hearted circuit on machines after jumping off a treadmill, but like many folks, I thought cardio workouts were tantamount to "real" exercise. Then I happened upon this book. It struck a chord with me, and I decided that free-weight training was in my future.



One day, I bravely picked up an empty Olympic bar and embarked on the first exercise of Schuler and Cosgrove's "Break-in" program: the squat. "Fifteen reps with 45 pounds," I told myself, "I can do this." However, I stopped at twelve reps. I stopped at twelve reps because I really wanted to avoid forever being tagged as the guy who collapsed in the power cage with forty-five measly pounds atop his shoulders. I forgot all about the prescribed one-minute resting period between sets, and simply waited for my legs to quit shaking. This took significantly longer than one minute. A profound realization overtook me: I was a wimp--a six-four, two hundred and forty pound wimp. At that moment, I decided that I'd spent decades of my life ignorant of what constituted "real" exercise.



The upper-body exercises went better. The real challenge, at that point, was walking from station to station. If the gym had offered me a wheelchair to move between exercises, I would have humbly taken them up on it.



The next morning, I felt sore, although I told myself that it wasn't so bad. Then came the second morning. I got out of bed, and for a moment, I considered asking my wife to call 9-1-1. My upper legs felt as if someone had taken a meat tenderizer to them. For about the next week, my lower body reminded me that I might have bitten off more than I could chew.



It took me two weeks to gather the courage to embark upon the Break-in program again. (I felt torn between that and self-flagellation.) The second time around, things began on a little better note. I still couldn't get through a full two sets, but I was no longer moving between stations at tortoise speed.



I'm now finishing the four-week Break-in program. I'm still not using much weight for the squats, but I've graduated from the empty bar, and I'm completing all of the reps. Instead of staggering out of the gym trying not to vomit, I'm doing Cosgroves's "Afterburn" program on cardio machines to top off my workout. I'm glad I've stuck with it, especially when I run up hills and notice that my heart rate is lower than before I began the program. It never occurred to me that free-weight training would benefit my cardio activities.



Of course, as a newbie to free-weight training, I can't offer a valid comparison between the NROL programs and others. However, I like the idea that the Break-in program uses higher reps with lower weights. I think the chance of connective tissue injury is lessened compared to the "standard" three sets of eight to twelve reps, and I think it's a much safer way to learn what's involved in working your muscles to exhaustion.



My lack of experience notwithstanding, I think this is a great book for those who want to break into free-weight training, with a caveat or two. Looking back, I wish I'd started my program with a couple of weeks of body weight exercises. I had a nagging feeling that I was running before I could walk when I began the program, a feeling confirmed by an article I later found on Alwyn Cosgrove's website. He wrote, " . . . the only reason to ever use external load (i.e. weights) is because your bodyweight is not enough resistance. Yet most guys are making exercises harder by adding external load, when they aren't capable of handling their bodyweight in the same exercise. I'm constantly amazed by how many people I meet who can bench press whatever pounds of weight, but are unable to perform 10 correct push ups (typically due to a lack of core strength and synergistic muscle stability). As far as I'm concerned - unless you can do an easy twenty push ups, you have no business getting under a bar for bench pressing. In my training facility everyone begins with bodyweight exercises. You have to earn the right to lift weights in my facility." In another article, Cosgrove states that a lifter shouldn't consider doing squats with a barbell until he or she can do a set of single-leg squats with body weight. If I'd discovered that advice in time, it might have saved me from a week of moving around like a hobbled, worn-out old gelding.



Also, rank beginners such as I might consider using the services of a personal trainer when learning the squat and deadlift, or at least ask the advice of an experienced lifter. Although I'm new to this free-weight game, I'm convinced that the squat and deadlift are safe for most folks IF correct form is used. That's a big "if," however. In my case, I found the deadlift to be counterintuitive, and I had to use a mental checklist of sorts to avoid slipping into bad form.



So, I heartily recommend this book, given those qualifications. Schuler has a relaxed writing style I found effective and enjoyable, and Alwyn Cosgrove appears to be one of the most qualified and respected trainers out there. I've lost 11 pounds in the last month, with only minor changes in diet. That's quite heartening: at fifty, I've found cardio workouts are no longer the magic bullet for weight loss that they were in younger years.



And, that's only with the Break-in program. Next up is Cosgrove's Fat Loss program. Let me at `em! The New Rules of Lifting: Six Basic Moves for Maximum Muscle

This is a phenomenal book for anyone, from the personal trainer down to the weekend-warrior. As a physical therapist and certifeid strength & conditioning specialist, I appreciated all of the research references. Lou and Alwyn have done their homework to make this program. I'm looking forward to using their workouts and I'll report back in the future (for those that may find it helpful). Although, there are "only" 6 basic moves, there are many variations of the moves, so don't think for a minute that the routines will be boring.

BTW, this ties in real nicely with the works of Gray Cook, who has developed a Functional Movement screen around the 7 main movements of the body. Funny, how these tie in together. Its about time that someone has made this program simple for the masses. Lou, Alwyn, Mark Verstegen, Gray Cook, and Mike Boyle have got IT. Nice job to the authors!!!'


Detail Products
Detail Reviews
Click here for more information


Strength Training Strength Training Strength Training

Ipod Clock Radio - ipod dock, clock radio


There are some things I really like about this clock, and some things that really annoy me.



First the annoying things:

1) The *#&% scroll wheels. MESSAGE TO ALL MANUFACTURERS: Just because Apple has a scroll wheel doesn't mean you have to as well. They are not the be all and end all of UI devices. They work for the iPod because you hold it in your hand and you can navigate with your thumb. For an alarm clock this is not the case and (at least for me) they tend to be clunky and difficult to use. I would have gotten a clock without them, but I couldn't find one in my price range that also had good reviews.



2) The Backlight. I actually saw this issue in another review and bought the clock anyway. The problem is that the backlight is either on or it's off. Though there are ostensibly three dimmer modes, they do absolutely nothing that I can tell. When it's on, it's brighter than your desk lamp, and when it's off you can't see the screen in the dark. I keep it off, but then if I want to know what time it is in the middle of the night, I have to reach over to the clock and hit the dimmer switch.



3)The alarm volume is the same as the music volume. This is annoying if I want to listen to music as I go to sleep because when I'm trying to sleep I want the music quiet, but unless I somehow turn up the volume in my sleep, the alarm will be just as quiet in the morning. Pretty poor design, there.



Things I like:

1) There's a power button. I was really stoked when I saw this because my old iPod clock had absolutely no way to turn off the iPod/Radio/Aux Jack short of hitting the sleep button until the sleep timer hit zero.



2) With the volume up the alarm is loud. Really loud. I don't know if my neighbors appreciate that as much as I do, but at least it wakes me up in the morning. Most of the time.



3) There's a nap function. Enough said.



4) It does what it's supposed to and does it reasonably well. The sound is good, and I can hear it from across my apartment if I want to listen to podcasts while I do housework.



Overall, I'm happy with this iPod dock alarm clock. It works with a minimum of fuss, and for it's price it's a pretty good piece of equipment. Coby Digital Dual Alarm/Clock Radio with iPod Docking System (Black)

I saw another review of this clock that indicated the backlighting (neon blue) was too bright. I figured this was a small complaint I could live with -- but I was wrong. Even with the dimmer option engaged the blue light is almost bright enough to use for reading -- think 1970's disco light without the flashing. If you keep the clock away from the bed it is probably not such a problem. While interesting to see my wife in such light, it is not so good for sleeping. Otherwise the clock performs relatively well but this single aspect is enough for me to send it back.

I ordered this for my spacious office, everyone would love a bose, but I just didn't need all of THAT! I just wanted something I could listen to the radio on & also my ipod which is a 3rd Generation Nano - which fit nicely. I am loving it. Its shiny and looks sytlish. The light does not bother me, since its my office - it has 3 settings bright blue, blue & off. The sound quality is great with both ipod & radio. It has a great pointed sound at my desk that doesn't overflow into other areas, but if you TURN IT UP you can get a great radius & not lose sound quality. It also comes with a line out just in case your ipod didn't fit, but the slot looks large enough to handle other versions. I am satisfied.



I did not find the dials objectionable & was able to figure out the clock/ipod/radio functions without reading the manual. Set up took all of 2 minutes, mostly trying to find a plug ;]



I read in another review that it would be helpful to have a remote. I do not need one as I can reach it from where I sit to write this review - but the description says it comes with one. It does not.

I have been searching for a good ipod alarm clock system for my dorm room and was slightly apprehensive of this product given the low price as compared to so many others. But it just arrived today and its amazing. The sound quality is above average, which is excellent considering its under 40 bucks! It has two alarms which are very useful, and has a great radio reception. The backlight can be dimmed down so it is nice. The only con is a remote would have made this perfect

This ruined my ipod. It was not capatible with my ipod even though the instruction manual had the ipod's picture. Apparently it was the wrong generation and now my ipod is ruined. It froze and I had to replace it. Coby said it was not compatible so beware before you dock your ipod. The sound and ease of use is not very good either. I should have went to the store and shopped. I will think twice before ever buying from Coby. - Ipod Clock Radio - Ipod Dock - Clock Radio - Ipod Radio'


Detail Products
Detail Reviews
Click here for more information


Presentation Remote - laser pointer, pointer


Offering multiple presentations every month, I have had the opportunity (misfortune?) of handling many other remotes. This remote allows me to use it as a mouse or to advance my presentation, but with a switch on the side, I don't have to worry about doing the one while wanting the other. An example from a recent presentation with a different remote: the remote was a combined mouse/remote. During a presentation, was trying to advance to the next slide, but mistakenly thumb over the mouse control, turning on the selection screen over the slide. "No problem, I'll just scroll down to 'Next Slide'." But, wait, then mistakenly hit the button that went to the previous slide. Very frustrating and distracting.



This remote allows me, at the flick of the swith on the side, to move between the distinct functions. For someone like me (with larger hands), that is nice.



Also, I don't feel like I am holding a Chiclet! While I have larger hands and some may feel comfortable holding a remote the size of a mail stamp, I don't. This remote is not too large, even for smaller hands, but it is easy for me to feel the separate buttons without having to look at the remote.



The range is good, as well. While standing in the front of a 200+ auditorium, I had no problems advancing the presentation which was run from the laptop in the back of the room.



When I am giving presentations, now, and I am at another facility and they offer their own remote, I ask to use my own...They may look at me funny - really, who has their own remote? - but it is well worth it. Satechi SP400 Smart-Pointer (Red) 2.4Ghz RF Wireless Presenter with Mouse Function and Laser Pointer

I am very happy that I purchased the Smart-Pointer from Satechi. I teach both undergraduate and graduate students, and I also give presentations at state and national conferences. Rather than being chained to my laptop, I chose to purchase the Smart-Pointer so I could move around more freely to engage my audience. I have used several other remote pointers, and they were very finicky and didn't work very far from my laptop. In comparison, I have used the Smart-Pointer at distances of up to 70 feet from my laptop with no problem. The range is excellent if you like to move around.



The switch on the side of the Smart-Pointer changes the function of the buttons, so I haven't experienced any mix-ups, and the built-in laser function is great.



The seller supplied the first pair of AAA batteries in the box, so I was able to practice with the Smart-Pointer immediately. My laptop had no problem recognizing the device, and within minutes of opening the package, I was ready to go. Not that color matters in terms of functionality, but I purchased the red one to match my computer. Very nice!



The Smart-Pointer is lightweight, even with the batteries installed. It also fits my hand perfectly and slips easily into a pocket if I don't need to use it for a little while. The buttons are easy to find by touch, and I especially like the case that is included with the unit. The small zippered case measures approximately 5.5" by 4" and easily accommodates the pointer, the USB wireless connector, and 6 AAA batteries. (I believe in being prepared!)



Using a small remote that works with my laptop is much nicer than using a bulky projector remote. Because I had used other remote pointer units, I knew what I was looking for, and the Smart-Pointer has been very helpful to me. In fact, I am recommending this product to others at my university. You can buy this one with confidence.

This presenter could not be simpler to connect to a Macbook. I plugged the dongle in and a window opened suggesting that I might need to follow some actions through if the devise I was attempting to connect was a keyboard. Otherwise, if the devise is not a keyboard, it stated, I could disregard the prompt. I closed that window and, lo and behold the presenter was instantly fully functional !

I am also very satisfied with the performance the SP-400 provides. I had been using the remote that Mac supplied with my Macbook and it worked fine as long as I had a good clear line-of-sight shot at my computer.

On a few occasions, when I found myself off-center from the front of my Mac the function of the remote was impaired. How different this little presenter is ! The RF receiver picks up my clicks no matter where I point the presenter. Distance is no issue either. The range is fantastic (spec: up to 100 ft) !

The laser pointer is intense and powerful as well. As to the mouse function, as is true with most all multi-function presenters, the mouse feature works, but would probably not be something you would use a lot due to restricted directionality ( pointer moves up and down, left and right with arrow buttons - no true scrolling).

The SP 400 is smaller than the pictures seem to depict. It's just large enough to cradle in your hand comfortably and the heft is ideal as well.

Fantastic for Mac and probably the other guys as well ! - Laser Pointer - Pointer - Powerpoint - Wireless Presenter'


Detail Products
Detail Reviews
Click here for more information


Good Product - paper shredder, home office


This is a very good machine; especially, if you are able to get it for under $130.00.



Wish List:

1. Turn off the lights after after 30 minutes of inactivity.

2. Have the LED lights up the whole center display, when lit.

3. Four all-around-type of casters (with locks like the two being used), instead of the two all-around-type casters and the two big wheels.

4. The shredding is not exactly confetti size. It is cross-cut into pieces approximately 1 ½" in length by ¼" in width. I would prefer if the length were under ½".





Additional Information:

5. Machine weighs less than 30 lbs, not the 40+ noted in the description.

6. Shipping weight nears 42 lbs; I believe the information noted in description is reversed.

7. I could not find this machine in Royal's website; it may be new and has not been entered.



Bad design:

8. Grab handle is a dangerous when attempting to roll the shredder by this incorporated handle. This may cause you (the user) to breaker your a finger. Solution: Do not use the handle to move the machine; move it using both hands and not the handle.

9. The Forward and the Backward arrows on the activation buttons seem to be in the wrong direction. These would be applicable if the feeding was to be done downward and extraction was to be done upward. But it is not, it is feed towards the back and extracted towards the front; therefore, it activation keys should be reversed.



All in all, it is a very good shredder; I only gave it four-stars because of the Wish List. Hopefully, Royal will listen to the above comments and incorporate them into this product.



Final words on this product, I would recommend to buy the 16 or 15 page Royal Shredder on four caster wheels as they have a much better design. These have side handles and are easier to move around. If Royal eventually makes a 17 or 18 sheet shredder based on the four casters and side handles design as the 160MX and 150MX, then that is the way to go, but not the RL170MX with the two caster wheels and two side wheels. Royal Machines RL170MX 17-Sheet Heavy Duty Cross-Cut Shredder with Auto Start/Stop and Auto Reverse (29172A)

I needed a shredder that could handle very thick junk mail without the need to open.

I found the prior reviews very helpful - so thought I would leave one as well.

I agree. It is a great shredder, great quality and a great buy!

It tears through very thick junk mail without a problem.

I used it for several hours continuously and it did not jam or overheat once.

It has a huge waste container and the blue LCD screen and LED lights are cool.

I would highly recommend.



p.s. -- I also agree that the grab handle design is absolutely nonsensical and completely useless.

I suggest you find a place for it to live and don't move it.

This shredder works quite well, and shreds many sheets at once. Quality seems pretty good, after many uses the blades have not become noisier like some of the cheaper shredders out there.

One concern is that during shredding, sometimes a faint metallic clicking sound can be heard above the shredder noise, almost like something is loose inside of it. I haven't been able to pinpoint the problem, and Royal Machines customer service have said that this is a normal noise and that I shouldn't be concerned.

Also, after an extra long shredding session ( 30 mins or so ) I noticed a smell coming from the shredder. I turned it off and opened the basket to discover faint wisps of smoke coming from the shredder. Alarmed, I left it alone the whole day. When I went back to use it again, it worked fine and no more smoke.



Because of these concerns I rated 4 stars instead of 5. For such an expensive shredder I was rather hoping there would no concerns at all with quality.

I ordered this shredder based upon the reviews I read and the great price. The order arrived in just two days. This shredder has exceeded my expections (1 days use). It replaces an Aurora shredder that cost 3 times as much. Go to Staples and see the shredders they sell there. They are more expensive and are rather flimsy. The Royal is a much more durable construction. A fantastic buy!

After experiencing several low-cost shredders, I paid extra for this model expecting it to last a long time. It worked fine for the first few months, then began slowing down and working less efficiently. Today, just six months after purchase, it died. On inspection, it seems the flimsy parts broke or bent. The warranty is almost worthless. The purchaser has to send a letter by snail mail explaining the problem, wait for a return order, then package and ship it, and pay shipping both ways. It was easier and much faster just to junk it and get a new one at half the price and two-day shipping.Royal Machines RL170MX 17-Sheet Heavy Duty Cross-Cut Shredder with Auto Start/Stop and Auto Reverse (29172A) - Great Shredder - Paper Shredder - Credit Card - Home Office'


Detail Products
Detail Reviews
Click here for more information


Copper Bottom Teakettle - teakettle, cookware


Great kettle, fast heating. Without a fill-hole on the top, steam doesn't escape when pouring - a great feature. Easy to use pouring spout. The whistle fell off after 22 years of use and then it was a month after that the plastic melted because the whistle wasn't working and I wasn't paying attention. Easy to keep clean - wipe it off when wiping down the stove after cooking.

Oh! And the large size is great if you need to pour 3 qts of hot water down a sluggish drain!


My mother had this tea kettle for a couple of decades when I was growing up. I now have one that is 15 years old and it is working just as well as when I bought it. I use it two or three times a day, every week, every month, every year!



Like all workhorses, it gets pretty dirty but the stainless steel shines up very well.



I have also used its larger cousin and don't like it as well (if I remember correctly) because you can't turn-off the whistle.



Prior to buying this one, I owned three or four other brands and they all had problems -- like the handle getting too hot; a detachable whistle that got lost; it needs a trivet, steam comes out and burns your hand when pouring, etc. After an string of bad tea kettles, I remembered how well my mother's worked and I bought this model again. It might be the last one I ever buy!



It has _one_ flaw: you can accidentally overfill it so that it spits water when boiling.



This is easy to do, since you can't see how full it is when filling. An easy solution is to fill it full and pour about a cup out. Or just don't fill it very full.



Since this one flaw is easy to compensate for, I'm still giving it five stars.


Revere Copper Bottom Teakettle


I've owned this model kettle nearly 20 years. Looks like it's been through WWIII but does what it does well without being pretty. Heats water fast. Small size great for two 10oz mugs of tea. Other reviewers talk about water spitting out and the hot handle. Yes, it does both of these but if you don't overfill it it won't spit water (suggestion: get a bigger kettle if you want to boil more than 25oz). Yes the handle gets hot but only when the kettle is used to boil on high heat. Part of the issue with the hot handle is that the bottom is so small that when I put my gas burner on high the flame spreads out beyond the bottom of the kettle . I usually put my gas burner on half to two-thirds heat and then the handle doesn't get hot. Frankly, the copper bottom is so efficient you can boil nearly as fast on lower heat anyway. One thing I don't know but would like to hear from someone who recently purchased: is this still made in the USA? Mine from the 1980's was. If not, I wonder about the quality of today's model.


We have just entered our nineties. We are living in and sharing the kitchen in our daughter-in-law's home. They are heavy users of hot shower water in the morning. I am an early riser and need to wash my breakfast dishes without competing for that hot water. I went to a superstore and bought a teakettle. Took the best one offered in the 3 and 3/4 quart size. It failed miserably in weeks. My daughter in law then tried to help me out by going to a store and buying a better model. It, too, failed miserably. From our own married life with 8 children, I KNEW what model would actually win out, so I found it on Amazon.com. It is the Revere model which Peg and I had on the stove all our married life. It is a dream to use. It will not fail. I do not have to put a mitten on my hand to pick it up when I hear it boiling, and I DO HEAR it boiling!



The only downside is the computer order process. I tried to buy ONE, but the little box jumped to THREE, and I could not back out, so I own three. The one empty box and the two full boxes sit in my room as a reminder of how not to use the computer order process. I am too embarrassed to send a picture, but must admit the shiny copper bottoms in the see-through boxes are quite photogenic.


had my previous Revere 3-1/2 Qt teapot of the same model for more than 30 years.I'm sure it would have outlived me, except that I carelessly let it boil dry, damaging the plastic parts.Even with that,the pot itself was still tight and leak-free.Shipping: It must have gone out the same day I ordered it. I only live about 40 miles from the shipper,but 2 days from ordering for minimum-price Ground is not shabby at all.



Overall: This is the "Gold Standard" We're all looking for in E-Commerce.


I bought the 3.5 quart teakettle over 12 years ago and it is still going strong. This teakettle got me through college and let's just say I wasn't exactly easy on it over the years.

The whistle is surprisingly loud. You can't miss it, though it can be nearly deafening.

I've never had trouble with it drbbling or boiling over (unless seriously over filled). You can't really clean it but I mean you're boiling water in it. As long as you don't let the water sit in it for days you're fine. Yes, I have done that before and I just boiled a new pot and discarded it before making hot water for drinking.

It's not the prettiest kettle but it is functional and reliable.

- Cookware - Revere - Whisling Kettle - Teakettle'


Detail Products
Detail Reviews
Click here for more information


Hdmi Cable - hdmi, hdmi cables


OK, not much you can say about a cable, unless you get one that is bad or "flakey" from a problem with the shield, as we read from a previous posting.



I recently upgraded my HDTV system and now have a HDTV, Blue-ray, and Receiver that supports the HDMI 1.3 spec. This spec enables new high bandwidth features previously not supported in older HDMI cables and equipment. Both the Blue-ray and the HDTV, and my Roku-Netflix box are firmware upgradeable, so this cable should support their enhancements for at least a couple of years.



Being the quintessential anal-retentive Electrical Engineer, I tend to over analyze everything (even if not required). When buying cables (typically, the weak link in most systems), you have to determine if the product is manufactured from a reputable vendor, or built by a couple of guys in their garage, with no quality control. Mediabridge Products is a subsidiary of Broadband Products, Inc. Broadband Products has HDMI certification (see hdmi.org for why this is important).



There are two types of HDMI cable, Standard (Category 1) and High Speed (Category 2), and they have different performance metrics. A Standard cable can transmit a 1080i signal for 15 meters (49 feet) or more, while a High Speed HDMI cable can transmit a 1080p signal for at least 7.5 meters (25 feet). For the most part, running cables less than 5 meters, either will work, but I want to make sure and this cable is Category 2.



Why did I buy this specific cable from this vendor: The vendor has an almost perfect feedback record, the product is low cost for the specs, fulfilled by Amazon, and importantly free shipping, and a return policy that pays the shipping for returns/exchanges of defects.



ADK Mediabridge Ultra Series - High Speed HDMI Cable with Ethernet - Category 2 Certified - Supports 3D & Audio Return Channel [Latest HDMI Version Available] - (10 Feet)

These cables are the best buy, high quality. After buying your HD TV do yourself a favor and connect your set with these cables.

They are extremely well made, comparable to Monster cables at a fraction of the cost. Highly recommended, would buy again.

I bought this cable due to the high reviews and good price. HDMI being a digital signal, will either work or not, it doesn't degrade the signal, so I figured it would be okay as long as they worked the first shot.



Problem #1: When running this cable from my PS3 down to my bigscreen I discovered that if I ran the cable through the back of the entertainment center like all the other cables, it flaked out (green screen or static). If I dropped it straight down it worked. This indicated the shielding on the cable is not good, or that there is a fault in the cable.



Problem #2: After about 1 month, now the screen will sometimes flicker to a green screen/static and then back. If I play with the cable a bit it comes back. Either the cable is a little loose in the HDMI slots (doesn't feel like it) or there is a fault in the cable.



I tried to get away cheap, and now I'm dealing with it. I certainly wouldn't buy the $100 Monster cables. That is crazy. But there are some quality issues with this one.



EDIT: Well, it finally has become a serious problem. I believe it was due to it being slightly loose in the HDMI port. I just broke down and bought a phillips cable and the problem went away immediately. It _might_ work for you... or might not.

I ordered 2 of these cables but actually received the 10' nylon coated cables. The only bad thing about the nylon coated cables is that they are a little stiff and you must have enough clearance behind your HDMI port so that when the cable is plugged in, it is not under too much bending pressure. Other than that minor detail they work great and I've had no problems. I have one connected to my HDTV cable box and the other to my Xbox360. Great quality for the price!

I was really appreciative to find such a budget priced item that had great success in so many reviews. My purchase satisfaction was short lived, unfortunately.



Upon installation, the cables worked as expected and created an excellent signal, very pleased with it. No issues whatsoever.



Two weeks later, my signal from cable just stops suddenly. Fearing that it was my LCD failing somehow, I immediately investigated and started narrowing down the possible causes and troubleshooting discovered that it was indeed the HDMI cable only, along with the second one I had purchased for the video equipment. I confirmed so by trying them on other equipment elsewhere in the house and replacing the cables with other ones to see if they function.



Both were deader than a doornail with no known cause. Everything else in the house is fine, including other HDMI cables.



Perhaps they passed to close to the Kryptonite and didn't have long to live upon arrival or I just ended up with some kind of random event which causes electronic items not to behave like their dependable siblings.



Some day I may know all the answers, but for now, just a caveat for you to ponder.



[...] - 1080p - Playstation 3 - Hdmi - Hdmi Cables'


Detail Products
Detail Reviews
Click here for more information


hdmi cables Hdmi Cable - hdmi, hdmi cables

Kindle Protection - kindle accessory, marware


I thought I was more of a slip case person, preferring to hold my Kindle directly. That's what I initially bought: a SwissGear Legacy slip case. I started my search for a book light so I could read at night without disturbing my husband. Eventually I figured out that the only decent book lights attach best to an actual case instead of directly to the Kindle. Sure, there's products like the Kandle, but I really don't want to pay $3 a piece for two CR-2032 batteries for maybe 20 hours of juice. This left me looking for a new case for my Kindle.



I looked at the official Kindle 3 case, something about how the Kindle attaches just didn't seem secure to me, and while I hate to admit it, I need something that can take *some* abuse and still protect the Kindle, like going in my laptop bag for school. I also looked at some M-Edge cases, didn't like how they held it either. Maybe I'm just overprotective? Anyway, I finally stumbled across this one, and fell in love with everything about it.



First off, it holds the Kindle very securely. You slide it in and push a stiff flap of material behind the Kindle to hold it in place, it works great and its easily removable if the need arises. All ports and buttons are easily accessible, except the volume down might be slightly difficult. A tiny snip of scissors would solve that, it might just be a slight defect in mine. Someone else pointed out the odd color choices, they're right, there are 6 different shades of gray including the Kindle. Its all darkish except for the white stitching, I like it. I'll get some pictures up here fairly soon, although the factory ones are quite accurate. It does have a faint smell, I'm betting it will be gone in within a few days. Really, its nothing to refrain from purchasing it over, I can barely smell it and I bet a night outside and a little bit of Febreeze or something similar would eliminate it all together



First off, the whole thing is padded, which does make it thicker, I know I'm not complaining about the extra protection though. I'd say the front and back cover are nearly as thick as the Kindle itself. Closed the whole thing is about .75". Not bad at all. I'd be comfortable throwing this in my laptop case. It has an elastic band that holds it shut or open, the latter is a nice feature. It also holds my new Mighty Bright TravelFlex light well, although I wouldn't have it on there permanently.



The hand strap is great, I can hold the Kindle one handed with NO fear of dropping it. I've got fairly small hands and I can still reach the page turn buttons just fine. The little pocket is useless for anything that isn't thin, like their example of a credit card or money. I think I'm going to keep a small microfiber cloth in there. There's a mesh behind the speakers, for anyone that cares. It doesn't seem to hamper audio quality at all. I always use headphones anyway though.



I just recently received the case, so I can't speak much about its durability. It seems extremely sturdy however. Its single stitched everywhere, except where the page turn buttons are, where it's sort of double stitched. I'm very happy with it. Marware also makes a flip style version if you prefer that. Marware Eco-Flip Kindle Flip Case (Fits 6" Display, Latest Generation Kindle), Black



I'm not sure what else to say about a Kindle cover. I think I've said a lot considering its only a cover. It's great, not terribly expensive, and I highly recommend it. Any questions feel free to comment. Marware Eco-Vue Kindle Leather Folio, Black (Fits 6" Display, Latest Generation Kindle)

I would like to preface this by saying I researched LOTS of cases. I originally thought I would prefer reading my kindle naked so was looking for a sleeve type case. However, once I received my kindle I was surprised at how thin and delicate it felt in my hands and knew I'd be more comfortable with a case that stayed on to protect it all the the time. I originally gravitated towards this case because of its eco-friendly attributes and then was totally won over by the hand strap. I also liked how securely the case seemed to hold the kindle as opposed to hinges or corner tabs. I was not thrilled with black being the only choice, but went ahead with it because of all the other postive qualities. In the end I'm very happy with my decision. I've had the case for a few weeks and it feels more plush and cushiony than the hard leather amazon cases. I love how securely it holds my kindle and how well my kindle is protected even while in my purse, work bag, or backpack. The elastic strap holds it closed or open well and I love the feel of the soft interior. The hand strap is a nice convenience and can make holding it more comfortable depending on how I am sitting/laying. Overall I'd say the one downside is the lack of color choice but that is outweighed by all the great features (including the reasonable price) as well as bonus points for being kind to the environment. I would definitely recommend this case. - Kindle 3 Cover - Marware - Kindle 3 Covers - Kindle Accessory'


Detail Products
Detail Reviews
Click here for more information


marware Kindle Protection - kindle accessory, marware