Friday, 17 June 2011

Narrow Crown Stapler - narrow crown stapler, staplers


I've used many brands of nail guns with various prices and qualities. The Hitachi Narrow Crown Finish Stapler definitely one of the best considering the low price. Light, and easy to use, it also has a switch for single shot or bump action which is wonderful. Most homeowner will feel much comfortable with single shot and able to check how many staple left with exposed rail. With a short practice, most people can gain most of the control of this staple and use it with ease. It has no problem driving 1 1/2 into wood and I felt it doesn't use much of air pressure as my compressor stay quiet longer than some other nail guns with similar capability.



The only thing I don't like is the kit does not come with sample staples and lubricant. It is not that I don't have them at home but it means the case does not design with designated places for those. minus one star for that. Hitachi N3804AB3 1 1/2-Inch 18-Gauge Narrow Crown Finish Stapler

One thing I will add that the other reviewers did not mention is that this stapler packs a heck of a wallop. The power of this lightweight unit really amazed me.



The truth is, I did not know what to expect. I have never owned an air-powered stapler or nail gun. I planned to use this Hitachi stapler to put up kraft-faced insulation, and then later use it for trim work. Yeah, right. I loaded it with 0.50" staples. They went right through the paper tabs on the insulation and kept on going into the studs. I had to look hard to find them because they had been sunk so deeply.



I turned the air pressure down to 70 PSI, which is the minimum operating pressure and set the stapler's depth adjustment to minimum. No dice. Too powerful! I went back to using my Arrow T-50 Carpal Tunnel Syndrome Special.



I decided to get to know this little monster better. So I ran a test to see what it could do. I loaded it with 1.50" Senco staples and fastened a piece of 7/16" Oriented Strand Board (OSB) to some wall studs in about five seconds. Extremely impressive! I showed my science project to my wife.



She said, "Very nice. Now take it down. It looks terrible stuck up there."



I tried to pull the test piece off the wall with my bare hands, but it would not budge. Then I tried to pull it off with a 22 oz. framing hammer. That didn't work either. Finally, I had to use a 3-foot long pry bar. Geez, talk about embarrassing.



My last futile effort involved trying to recycle the test piece of OSB by attempting to extract the 1.5" staples I had shot into it. I won't tell you what happened except to say the OSB went into my woodstove, staples and all.



Here is a tip: Whatever you staple with this Hitachi stapler is forever.



UPDATE, October 2010: This stapler is still going strong. I have put up 1536 sq. ft. of 3/8" plywood using the stapler and have done various other jobs with it. I have run nearly 3000, 1 1/2" staples through the unit and have not experienced a single jam or other malfunction.



As for maintenance, all I have done is cleaned the unit with compressed air and sprayed some WD-40 on its moving parts. Of course, the stapler gets five to eight drops of air tool oil before each work cycle.

The Hitach is a nice looking tool, light weight, and it is cool. When loading the bolt draws back and locks. Staples fit over the rail tightly, but slide smoothly, release button is easy to operate and positive (not sloppy).



The stapler needs at least fifty pounds of pressure, but will sink the 1.25 inch staples perfectly into pine at that setting. It uses little air, so the compressor isn't called on much.



In "automatic" bump mode this gun will shoot all day. I was stapling 3' lengths of chicken wire to a wooden frame. The gun has never jammed.



As much as I hate manual staplers, I love this tool!



It is a joy to use, and accurate. I highly recommend this tool.

This stapler drove all staples under the surface. The depth adjuster is not designed correctly and will not hold the stapler far enough away from the material. If you always want to drive 1/16th under the surface, this is a good stapler. But, if you want to drive just flush or just to the surface, you will have to put a spacer under the foot. I tried another Hitachi, and it had the same defect. I bought the Porter Cable and it works flawlessly. Amazon refunded all of my money including return shipping. I find it very rare to get a better deal than Amazon anywhere on the 'net.

These narrow crown staples are wonderful. They deform when they go in. That's why they hold so very well. Plus, they do not split your workpiece. PLUS, they are very inexpensive per each. I even used them to fasten cedar to cedar -- which doesn't always like nails.



This Hitachi stapler itself is everything the other reviewers say it is -- except that there is actually a little room in the case for enough staples to do a small job. Much nicer to use than the old stapler I wore out.



When you buy it, you might consider getting a selection of different length staples.

We needed to purchase another stapler for our custom cabinet shop. Wanted something durable, but light weight. We have had Hitachi brad guns for years and never had any issues, so for less then a C-note we got this unit.



Fits your hand well, easy to load and easy to use.



It has plenty of power pushing 1 1/4 staples into hardwood without any problems. It will be interesting to see how this unit holds up in the long run, all indications indicate no reason to be concerned.



Only negative that I have found is that you can't load two full clips of staples - the magazine isn't long enough.

Picked this up today from local big box store (as a replacement for a Bostich, but that's another review). I was going through the manual and when I tried to adjust the staple depth, the wheel that's supposed to turn got stuck and never moved again. I'm taking it back tomorrow. - Finish Staplers - Staplers - Staples - Narrow Crown Stapler'


Detail Products
Detail Reviews
Click here for more information


Narrow Crown Stapler - narrow crown stapler, staplers staplers Narrow Crown Stapler - narrow crown stapler, staplers

Comfortable - durable, comfortable


I bought these for my friend for Christmas. She told me they are perfect! They fit perfectly and don't ride up on her, even when she takes an intense yoga class. I was very relieved she was so happy with them, since it was a risk to order this type of product online.



I was also impressed with the company because they initially made an error with the order, but once I made them aware of the mistake, they corrected it immediately. American Apparel 8328 Cotton Spandex Jersey Legging, Black, L

I have been looking for a durable yet comfortable legging that will deal with the everyday wear and tear of being a preschool teacher. Fit, length, comfort and opaque material was important to me. These leggings have met all my expectations. I am 5"10 150lbs and the large fit nicely in length and didn't feel too tight. The hue was flat and not shiny like cheaper leggings that I have seen. I will buy more of these! - Leggings - Durable - Comfortable'


Detail Products
Detail Reviews
Click here for more information


Comfortable - durable, comfortable comfortable Comfortable - durable, comfortable

Grizzly - dust, dust collectors


I was going to get the Delta 50-850 but this one includes standard 1 micron bags so I decided to get the 50-760 instead. Set up took about 15 minutes including fumbling with the bag and the exterior band strap. Delta includes an interior flexible band & a band strap to mount the bottom bag with. I suppose out of habit I used the band strap but the flex band seems a lot easier and I will probably switch bag mounting methods next time I empty it. The unit runs a lot quieter than I had imagined and seems to have more than enough power to collect the dust from my shop. With 2 clear chip bags 1 micron collection and the cfm rating this machine is hard to beat. I do not see having to upgrade to anything larger. DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector

I received my 50-760 late last year. Even though I have been receiving items damaged from Amazon, the dust collector made it without any problems at all.



Assembly was a snap, fit and finish was very good.



I am still running the DC at 120v, but will be wiring to 240v after I put in the 240v outlet.



I currently use the DC in a ducted metal pipe environment. I come off vertically with 6 inch spiral pipe (5 inch to 6 inch expander from machine), run up to ceiling, run over 16 feet, then head down to the floor with 5 inch pipe. I have multiple branches off this vertical pipe, and run 5 inch hose to the woodworking machines via home-made blast gates. Eventually I will expand the system to other machines, but since the existing ductwork and run lengths are the longest that I will be using, there is absolutely no doubt in my mind that the future enhancements will also work just as good as the existing hookups.



Performance with the above set-up is great. I have great airflow and suction, and the amount of dust and sawdust has been reduced tremendously in the woodshop.



Noise level is not a problem. While not quiet, the noise level is less than my shop vac was. Since the DC is in a corner of the woodshop, it is at least a fair bit away from me. Eventually I will add a wooden panel or two around the unit to block some of the direct noise.



I am glad that I purchased the unit. It handles my woodworking needs at a low cost and with a small footprint. No regrets on purchasing the unit.



I can't wait to hook up the rest of my machines!

I've had this collector for several weeks now and I'm very happy with it. Based on another reviewer's input I purchased a 20 gallon can to use as a chip separator, but after taking measurements I decided that a 30 gallon can would fit. I will post a photo to show how it looks.



This makes an almost perfect system for a garage shop where mobility is key. You end up with a powerful, self contained separator/collector that has a small footprint.



Update: For those who are interested the connection on the top of the can is a 5" straight pipe connected to the collector port with 5" flexible hose. The connection on the side of the can is a 4" ninety degree elbow which is angled to direct the flow slightly downward around the side of the can. I cut the holes in the can with a jig saw and attached the ports with silicone calk.

I received my unit with a slightly damaged motor housing that was cosmetic only (like most other reviewers). No other flaws. Assembly about 1 hour. Have used it for about a year now with no problems at all. It has far better suction than a 650cfm unit and this enables you to use floor vacuums (like the one sold by grizzly with the wheels on it) and a cleaner shop. The one micron bag is nice. The unit is tall but has the smallest footprint of any dust collector with this amount of power.



The best part of this dust collector is the ability to add a shopmade seperator ON THE SAME FOOTPRINT. All other dust collectors force you to use up additional floor space for the seperator. If you turn wet wood or use a planer then dust collector input hose will get clogged from long strands and everything grinds to a halt (regardless of dust collector model). The trick is to add a seperator. To add a seperator to this unit you make a plywood floor for the bottome of the unit. Then you place a 20 gallon metal trash can under the motor unit on the platform you just added. The lid is just a piece of round plywood with two holes cut in it, one 5 inch hole for the suction intake to the motor, and one 4 inch hole for the hose to the tool. Use a glue gun to seal around the hoses where they enter the lid. Altogether should take an hour to build. I tried numerous rubber trash cans but this dust collector imploded all of them, you have to use a steel can. All commercial seperator lids are for 5 or 30 gallon cans. 5 gallon cans are toys for people using shopvacs, and a 30 gallon can wont fit on this models stand. I bought the 20 gallon steel can at a Menards.



My only complaint is the same as most of these mobile tools--I wish it came with bigger wheels so it could jump a power cord. The tubular frame does not look like it will tolerate bigger wheels but maybe I will get around to trying that eventually.

I can see how many have reported damage from shipping. The top of the motor is not well protected in the packaging. I bought mine locally to save the headache.



Assembly is very easy and all the parts fit perfectly. There are two choices for connecting the clear, plastic bag: large quick release band clamp, or large felt o-ring. The top bag connects with the large felt o-ring and it seems easier to me than using the clamp. I opted to attach the plastic collection bag using the o-ring. It works well.



There are also two choices for mounting the motor and blower assembly. You can assemble it with the motor on top and the inlet on the bottom as shown in the photos, or the other way around with the motor on the bottom and the inlet on the top. This makes it convenient for folks who want to install overhead duct work.



This machine is much larger than you might imagine. It's 83" (almost 7 feet) tall and occupies 35" X 19" floor space, which is a small foot print - it's the height that is a shocker.



The machine comes with a 5" X 4" X 4" wye fitting. You can hook up one 5" hose or duct (odd size), or two 4" hoses. This puzzles me because a 1.5 hp machine is not really suited for more than one machine at a time and most folks would put a wye further away from the machine. I used a 5" to 6" adapter and went with 6" ducting with 6" to 4" reducers at most machines except my 15" planer, which I ducted 6" all the way.



I have about 32 feet of 6" metal duct work with 3 wyes and 6 blast gates to shut off either entire parts of the system or just individual machines. Much to my surprise, it works great. I was worried that this machine would lack the power to handle sophisticated duct work. I run only one machine's blast gate open at a time. I also have a floor sweep that connects directly to the 6" duct. It's fun to use. You just sweep a pile of sawdust with 4 to 6 inches of the floor sweep and it sucks it right up.



I run a 15" Jet planer with a 6" duct and it has so far kept up with fairly aggressive passes on 12" wide stock. I didn't honestly think it would be able to do it but it does.



Emptying the plastic bag and cleaning the felt bag is a royal pain. There is nothing wrong with the 50-760. All machines designed this way are a pain to dump and clean. Fine dust will pour out in clouds if you're not super careful when dumping. I take my top bag off first and fold it so as to close off the opening and take it straight outside. I then remove the bottom bag very carefully so as not to stir up the dust and take it straight outside as well. After dumping the plastic bag I turn the felt bag inside out being careful not to damage it and then lightly shake it and brush it clean with a soft bristled brush.



After using the machine for a few hours I turn it off and lightly swat the felt bag with my hands causing the shavings and dust to fall into the lower plastic bag. It will clog if this is not done regularly along with the cleaning I perform when dumping.



1 micron is nice but dust still comes through the bag. It's much better than a 30 micron bag but it's not magic.



Since wood chips come into direct contact with the impeller blade I think a pre-separator would be a good investment. I have a friend who uses the trash can style plastic cyclone separator with good success. I am going to build a custom 6" one since all the store bought stuff is only 4". The fewer times you have to empty and clean this thing the better off you'd be. - Dust Collectors - Dust - Dust Collection - Delta'


Detail Products
Detail Reviews
Click here for more information


Grizzly - dust, dust collectors dust collection Grizzly - dust, dust collectors

Low-cut Socks


These socks are breathable, nice looking, and soft...I originally only ordered one package and was so happy that I ordered 2 more. I have also noticed that they wash well and dont seem to shrink or fade. Izod Womens Low Cut Cool Max And Toe Stripe 3 Pair Pack Sock, Black, One Size

These are comfy, soft and just what I wanted. (dark socks to go with my darker shoes) I wish the IZOD lettering weren't visible across the top, but whatever. Didn't bother me enough to send back. these are keepers'


Detail Products
Detail Reviews
Click here for more information


Low-cut Socks Low-cut Socks Low-cut Socks

Unlocked Blackberry Storm - blackberry storm 9530, blackberry


I bought this item some weeks ago and It's been working Good.. Maybe the issue of Activation could be a problem for you, but I Have the solution.

Do the next... Press ##000000 and then press ok, then, where say MOBIL DIRECTORY NUMBER delete the number that appears in there and Write your own number, then press RIM buttom and press Save.. That's it.. Problem Fixed.. I hope it works on your cellphones... Blackberry 9530 Storm Unlocked For Any GSM Carrier Worldwide

Not much to say but CONS, lots of cons:

a. WEAK BATTERY, charge every 6 hours

b. ACTIVATION REQUIRED 24/7 ON YOUR FACE

c. LOUSY CUSTOMER SERVICE, they don't offer any solution even though i contacted them twice.

d. THERE'S NO EXTRA ACCESSORIES, THE PICTURES IS MISLEADING



VERY FRUSTRATING...

I was looking for the unlock cell phone for travel to over sea, found this Blackberry sound good for what I need for the price, then after received the phone try to used it turn out it need to activate from verizon service, this phone have to go back.



aw.

Now i can not say much about the phone because i have never received the item or blessed eyes on it now i placed an order with the OEM shop on the 5th of February 2011 today as i am writing this review is the 10th of march 2011 you do the math, this is how long ago i placed my order.from i placed my order i have been back and forth with this company (the OEM shop)trying to resolve this problem these people have gotten my money a month ago and i can not get it back up to now every time i contact them, as i don't have a phone number for them, i have to do so via emails they send back saying sorry for the inconvenience this company was dishonest from the start i ordered a phone that they knew they did not have in stock and i had to contact them after weeks of wondering where my phone was, not having a tracking number to find out from one person that it was on some kinda back order then it was out of stock and when it became available they will ship it. I told these people i wanted my money back they still ship the phone the, they recalled the phone in mid transit an sent me an email, mind you with such a matter i believe phone calls would be best but that's just my opinion,telling me that they will refund my money within 48hours to my knowledge 48 means within two days i received this email on the 7th of march 2011 it is now the 10th of march 2011 and up to now no one has contact me as to where my money is and when i will be getting it back this is my first time having dealings with this company (the OEM shop) and it has been the worst experienced yet i have googled trying to find other ways in terms of a phone number to contact this business to speak to a manager or someone in charge to no avail but what did come up on my Google search is posts and reviews of people who this company (the OEM shop) has done something similar to.To end off i would have to say people amazon is great because i have ordered stuff on the same day i ordered from the OEM shop and after and guess what i have already gotten my items but i have to say that the OEM shop will not be getting any more business from me other customers be aware you don't want to end up with the same problem i had.With that said i think amazon should have as a policy that persons or business who sell on Amazon need to put up more than an email address as contact info for those of us that end up having disputes like this because if you don't call (which you cant because there is no number) or email the OEM shop they wont contact you and tell you what is happen they need to realize people have to work hard for their money and don't wish to see it go down the drain for nothing again, Amazon is wonderful but the OEM shop needs to pull up their socks this is not a nice thing to be doing !!!!!!!!!

The phone is lovely and just what I needed. Unfortunately it was still locked onto a specific carrier and hence useless to me. The seller (OEM Shop) was unresponsive and has yet to resolve the issue. I had to purchase a different phone and get on with life.

I paid for 1 day shipment. They spend 3 days to move it from Brooklyn to Newark. In the end it was 5 days shipment. Nothing to say about phone cause I'm in another country now.

No answer for claims from amazon or seller. No comments :)

I purchased the Unlocked Storm because the description led me to believe that the phone would have full functionality on the all GSM networks. Unfortunately that was not accurate. OEM did contact me regarding some of the issues with the phone but they took two to three days to reply to my emails and would not call me to trouble shoot or fully resolve my issues. Because I was trying to get the phone to work following very cryptic emails from their technical person, I missed the 30-day window to return the product or a refund. The phone is still not working properly with our wireless carrier. I would not purchase this phone believing it will work with AT&T. I have always liked shopping on Amazon.com will continue to do so but I was disappointed with this vendor and the service I received. - Blackberry Storm 9530 - Blackberry 9530 - Blackberry - Blackberry Storm'


Detail Products
Detail Reviews
Click here for more information


Unlocked Blackberry Storm - blackberry storm 9530, blackberry blackberry storm Unlocked Blackberry Storm - blackberry storm 9530, blackberry

Teaching Materials - cookbook stand, kindle accessory


This holder keeps papers upright and in position, but it doesn't handle books particularly well, as the clip cannot grip surfaces as thick as most books and the base isn't as wide as most books when they're opened. I have this AND a book stand so I keep myself covered on both ends. Insight Adjustable Book & Copy Holder

This product is [retty good, but don't even try putting a bood on it, the holder will tip over and it doesn't clip the pages of a book very well. But for papers it's good and it's adjustable, which is convient. It did hold my notebook very well, but for books it sucks.

I was looking for a narrow bookstand to prop my Kindle up next to my monitor on my desk, the reviews cautioning about this stand not being the best for some bigger books made it sound Just Right for the Kindle, and it does indeed do the job nicely.

This "book holder" is a perfect stand for the Apple Ipad. It could have been designed for it. Sturdy, very adjustable, will hold the Ipad at various angles in either the vertical or landscape positions.

I bought this to use with an iPad and while the angle adjustments are great, the color blends in and the iPad looks terrific on it there is one downside.



The plastic holder on the back does not lock or snap into place when you angle it. There's no security at all. If you are like me and want to have your iPad on the stand and then pick up the stand with the iPad on it to change locations, the leg on the back will immediately dislodge from the plastic slots that they sit in. They just rest in there and nothing holds them in. That's understandable since this is meant for paper copies and probably to live on a desk but I was disappointed it wasn't a little more secure.



It's a sturdy stand and really does look great with the iPad but I carry mine around and use it on a stand in my lap. You have to be really careful and pick up the iPad off the stand and then pick up the stand or it may collapse unexpectedly. I would have given it five stars if there was a snap lock rather than loose slots.

I'm a typist. Do people still even USE that word? Even saying I'm a word processor sounds old-fashioned these days. Well, you get my drift. I have a different gizmo I use when I want to hold a book open (a clear lucite thing) so I have no problems with this being unable to hold heavy books. I only need it to hold COPY for typing or for following while I type. I have been typing for over 30 years and I have gone through quite a plethora of copy holders over the years. This is the greatest I have used thus far: lightweight (a BIG plus), adjustable angle (very important for someone with desk lighting), adjustable height (will even hold 14" tall paper and not just 11"). I gave this 5 stars partly because there is not a choice of 4.5, which is what I WOULD really give it because of one minus: there is no arm for following the copy. If I look away and then look back, nothing in this stand will help me find my place. I have to devise my own methods. However I would prefer NO line arm to one that just gets in my way and causes problems (which I have found to be the case with most such arms), so it's not that big a deal. I'm already in the habit of making light pencil marks all over my copy (or sticking small post-it notes if it is copy I must not mess up), so it's not that big a deal to me. A great deal for the price!

Despite the name, this is clearly not designed for ANY books (thick or thin), and I have found it not very useful for copy either as the top clip does not grip at all. Its very light and compact, but does not lock into place, no base weight or rubber base to prevent constant slipping and collapsing. - Cookbook Stand - Kindle Stand - Kindle Accessory - Book Stand'


Detail Products
Detail Reviews
Click here for more information


Teaching Materials - cookbook stand, kindle accessory cookbook stand Teaching Materials - cookbook stand, kindle accessory

All In One Printer - pixma, canon


If you are looking at these reviews for the MX870, you are probably wondering what I was wondering... "What is the difference between the MX870 and MX860 and possibly also how does it compare to the Epson Artisan 810?" They are all top rated by Amazon customers for inkjet all-in-one printers.



They are all awesome! The Epson has more color cartriges, but I am not sure if that matters. I give the nod to the Epson on photo quality, but it might just be a subliminal issue of 'more is better'. My last Epson printer was the Epson 785EPX and it printed amazing photos and graphics, and it also used 6 colors.



Both the Canon and Epson have beautiful quick drying inks. The Canon has a special black ink that is a pigment instead of a dye, which you might like since pigments don't run when wet, so theirs is good for flyers and such. And, by the way, if you've discovered that you really benefit from pigment ink, look into the Epson Workforce 610. It is fast, and all its different colored inks are pigments. Graphics and text are outstanding, but photos a little lacking.



The Canon is a little slower to start printing, but once it gets going it is pretty fast. Both Epson and Canon models have an optional duplexer mode (prints on both sides to save paper - this feature significantly slows down print time if that is important to you) and an automatic paper feed. The paper feed on the Canon is fully integrated and two-sided, so it can copy/scan both sides of a document automatically as well. There are a few hiccups with the 860 on this that the 870 solves.



It's a small pain to reload the reglar A4 8 1/2 by 11 paper in both machines in their lower tray. The Epson has an additional slot on its lower tray for photo paper that some may like. The Canon has an extra paper feed at the back of the unit that is great for printing envelopes, prints, or other types of paper, so you don't have to change your main tray. The rear feeder should accommodate heavier papers and have a less likelihood of jamming because the paper comes straight through the machine with little bending. The projecting tray on the Epson looks and feels flimsy and most people seem worried about that, but remarkably I have never heard of anyone breaking it. The Canon has a cool feature... when you send it a wireless command to print, it automatically lowers its front door for the paper to be collected on, so you can keep the unit all closed up when not in use.



If you use OCR, and I love OCR (optical character recognition that allows you to turn your document scans into text files), you will prefer the Epson because it is integrated into their software package. Canons used to have OCR software, but have stopped in the recent year. Note: If you have Microsoft Office Student and Home version, its program 'OneNote' has OCR for you to use. Most people are totally unaware of it being there. By the way, OneNote is the best program on Microsoft Office. It is what keeps me from just using the free open source office software that is so amazing.



Price-wise, the Epson is about 100 more than the Canon. Amazon has some of the best prices. The newer Canon MX870 isn't even available in most stores yet and probably will run about 50 dollars more than the MX860 for the next six months. Apple users will like the smoother integrated software application of the MX870 that was a small problem on the MX860.



Space-wise the Canon is bigger. Look-wise, the Epson is sharper with its shiny black finish, like a piece of fancy stereo equipment. The Canon has a neutral light beige look. Very officey with clean lines.



They both fax if you ever need that every now and then instead of having to run to your local print shop.



The user interface of the Canon and Epson are both easy to use in different ways. I sort of wish the Canon buttons weren't so flush with the unit, but its not really a big deal. You will need to use the interface to copy and scan, but most print jobs you will want to do from your computer.



The Epson has some fun graphics software extra on it. Again, mostly 'fun' stuff. It also prints on printable CDs and DVDs. This could be important to you. It is the best of any printer at this. I don't need it because I print on CDs using LightScribe on my HP. I like that look better if I am going to customize the CD face.



The Canon has some very useful proprietary software that you will love if you surf the Web and want to copy and print out multiple bits and pieces of articles with ease... even on the same sheet of paper. You can do this anyway with Windows, but Canon's program is easier and faster.



Both Canon and Epson have ink cartridges that are separate from the print head, so it is easier to find third-party ink and save money. Third party ink is better than what it used to be, but the OEM (original equipment manufacture) cartridges are truer and faster drying for important projects and to bring out the full glory of these machines.



I chose the Canon MX870, but all the printers I mentioned here are rated tops at their price-point. I hope I covered a few of the more notable differences to help you narrow in on your search. Canon PIXMA MX870 Wireless Office All-in-One Printer (4206B002) - Canon - Canon Multifunction - All In One Printer - Pixma'


Detail Products
Detail Reviews
Click here for more information


canon multifunction All In One Printer - pixma, canon