Monday, 7 February 2011

Garmin Nuvi 200w - gps


A friend gave me a Garman Nuvi 200 with no cables. Said he just changes it on his computer using USB and then uses it on battery for his trips. I do longer trips and needed a auto charger. The one for my Blackberry (also USB) didn't work correctly in that the Nuvi went into "transfer mode". Replacements from Garmin were pretty expensive. This one was just right. Works great. Even charges my Blackberry! Gilsson 12V Cigarette Lighter Adapter for Garmin GPS Nuvi 200 250 255 350 660 755 760 785 885 Magellan 1412 4210 4250

we have a garmin that my son would "play" with at times, the original connections became weak, and our gps was then useless, we tried to cheap out and i ordered a replacement off ebay for mere dollars, and i got what i paid for.. it was broke in a week with it just staying on my windshield..

however THIS replacement cord is made more like the original, the cord isn't coiled, it is straight, which may bother some that you have extra wire to bundle up, but having this doesn't create a pull on the gps like our cheap replacement did, also this cord has a 90 degree point that inserts into the garmin like the original, which is needed for it to stay in there good, and not pull, like our cheap one..

we've had it and been using it for the last couple months with no issues at all. it keeps our gps charged and we can use it while driving which is what you need it for, unlike some of the cheaper ones.

overall, i would say it is a great purchase, would definitely buy again, save money by not trying to get the cheap ones first.

I had some trouble fitting the power cord into my Magellan Maestro GPS unit. It looked the same as the original, so I kept trying. With a little more force than I would have liked to have used on it, it finally popped in. It works great now that it's in there though.

I would just like to clarify, as I made the mistake, that this is just a basic mini-usb car charger. I already had at least three that fit into the side of the gps itself. What I was looking for was something that plugged into the holder that goes on the windshield that charges the gps while it is being used. This is not it. So look around in your house before you buy an overpriced cable that you could find anywhere.

I have suffered at the cost of my trip to a new city. I bought this and plugged it into my Garmin255W gps receiver, hoping this would work as expected. It turns out that this makes my gps restart every 5 seconds. Yes, it does not work and may cause damage to your gps.



Don't buy it. I returned this item but haven't received any refund back yet.

This unit works! The plug on the adapter which provides for mounting my NUVI 760 to the 'non-slip' Garmin pad went bad. I thought the cord I was using was bad but after reading a forum on the internet I tried a second cord which wouldn't work either.



After learning this I decided to order this one, the end of which plugs directly into the bottom of the GPS. BTW, I'm ordering a second one for my Van. - Gps'


Detail Products
Detail Reviews
Click here for more information


Fitness Ball - stability ball, exercise


I'm 6'5" 270 pounds. So when I looked into stability balls I was really concerned with whether one would support me. So far, so good. I got it yesterday, blew it up in a few minutes, and sat on it (hesitantly at first) for over an hour. Then worked out for about an hour. It seems very durable and able to maintain my weight without a problem. The exercises on this thing are super effective, as I can feel today. The ball is just right as far as size goes.

Someone complained about the pump, but I found it efficient. It's like a huge syringe. It worked fine. It only took me a few minutes to pump the ball up and that was with my one year old hanging on me so he could mess with the ball.

If something happens and this product fails in some way, I will immediately update this review so that anyone who's concerned can know. So if you don't see an update, the TKO's going strong. TKO Anti Burst Fitness Ball Set 65cm

I got this ball to use as a chair to bounce my baby while I am holding him and at the computer desk. I think it is excellent and has helped with better posture without any thought. I also end up doing some excerises on it, just because it is there. It does not have the ultra shiny surface as is noted in the picture. Also, it is a pretty standard size I believe and is not too tall for me. I can sit comfortably, with my knees at 90 degrees and I am 5'4". As for the reviewers that are not impressed with the pump: well, I don't care. I don't plan on deflating and inflating this thing again and again.

I love this ball, I don't even mind if I leave it out at my home. It has a bit of sparkly in it. Totally different texture than my old ball. The "Anti Burst" feature sold me as after 4 years w/ my old call it bursted on me during a "Pilates on the Ball Session" luckily I wasn't hurt. (If I had been turned the other direction I could have smacked my head on the coffee table on the way down.)



So I went online and found this beauty to replace it. Love the foot pump too, felt like it inflated faster than my old hand pump.

I have two exercise balls -- one for home and one for work.



This is the ball that replaced my office chair at work. I sit on it daily, frequently bounce on it when no one is around, and it has rolled around my floor with coworkers a couple of times. I've only inflated it once (the initial time) in the time I've had it -- over three months!! I weigh about 130lb (+/-) so I don't add a *ton* of constant weight on the ball. It has lost *some* air (it's not perfect after all), but it's still very firm. (I will probably re-inflate it this week or next.) Three additional bonuses about the ball: (1) since it's a dark color it doesn't pop out at people as they walk by me at work; (2) it's neither sticky nor overly smooth; and (3) it's anti-burst. The ball has a good texture that keeps you in place but doesn't pick up lint/dust. Some balls seem to attract it. Also, if you've seen that episode of "The Office" ([...]) you can appreciate the importance of an anti-burst ball. I haven't tested out this feature (and don't plan on it!), but I am glad that it is there since ANY stability ball can be popped.



The exercise ball that I have at home (GoFit) has lost air much quicker and I don't use it 1/10th as frequently! When I replace my GoFit, I'll definitely go with another TKO!

The ball is quite sturdy, the hand pump is a workout in itself. The sizing is confusing, among all brands, they can't agree. The box says the 55cm is for 5'6"-6'0", I bought this ball under the impression that 55cm was the size for anyone under 5'4". This is my reality: 5'2", 190lbs, looking mostly for something other than the couch to sit on, working on core strength. This ball is smaller than I wanted, my legs do not make 90 degree angle. Maybe I am too heavy, or perhaps after a few days I will be able to get more air in it. It will be great for exercizes where I hold it between my arms or legs, but for sitting on, or push-ups I will order a 65cm ball. My recommendation is to skip the sizing charts, find someone with a ball and decide for yourself which size suits your needs. Shipping was fine.

I am a proponent of fitness and the intent of my review is not to tout the benefits of using this product. As an active individual, I decided on this item to add dimension, that I thought needed, to my routine. I also intended to use this ball as a supporting structure (chair) for my writing assignments and such. Having used "fitness balls" in the past, I selected this item on reviews. I was disappointed.



This company delivered the product as promised. No issues here.



After inflation and initial use, I was satisfied with the product for the first few hours. Then I noticed that the ball began to lose pressure. I was not successful in trying to find one leak. My product has multiple leaks from the vulcanized seam. I only found them after submersing the surface area in soapy water.



As I am overseas now, with the product, a return is more effort than worth.



Had the product worked (held air pressure), I would have been satisfied.

i do not know if my defect was a one-time issue or a common problem. All I can offer is caution in your purchase. - Exercise - Stability Ball - Exercise Ball - Ball Chair'


Detail Products
Detail Reviews
Click here for more information


Photo Quality Paper - photography, canon photo paper


I have a Canon PIXMA iP6220D Photo Printer and use Canon Paper for all my photo printing (usually 4x6 or 5x7, but some 8x10 too). I figure Canon makes the printer, the ink, and the paper, so they MUST test all three of those together, and that combination should produce good results. AND, I can say that it does! Photo paper is usually pricey in the local stores, so I buy mine online (Amazon!) and I've been really happy with this specific purchase of Canon Photo Paper Plus Glossy II, 5 x 7 inches, 20 Sheets (2311B024) paper. Results from my setup look like they came from the local photo processing store. The paper is packaged nicely, protected in a nice box, with cardboard inserts on each side of the paper deck, in a resealable plastic bag. I recommend keeping the paper in the sealed plastic and in the box while it's on your shelf waiting for use. Canon Photo Paper Plus Glossy II, 5 x 7 Inches, 20 Sheets (2311B024)

It's hard to review photo paper since one of the key qualities is how prints will hold up over time. I of course can't vouch for that. But using this paper with my Canon Pixma MX850 printer produces just stunning images. Colors jump off the page, lines are razor crisp, no smudging and no wasted paper due to paper jams or misfeeds. The best Amazon vendor is offering 20 pages of 5 x 7 Canon Plus Glossy II for about $6.50, and even better 100 pages of 4 x 6 for around $7.50 all with free delivery. So for not much more than sending it away professionally I'm now making lab-quality prints at home which I get to tweak for contrast, color saturation, etc, just how I want them. Totally worth it to me. I'm very pleased with the results.

I bought this paper for my Canon MP970 after printing photos on HP glossy photo paper and another brand of glossy photo paper that claims to work on all models of printers. The results on those papers were disappointing.

After a little bit of searching, I realized that the best price anywhere for 5 x 7 inch glossy photo paper was right here on Amazon. Photos I've printed on the Canon paper are stunning, as good as pictures sent out to be printed. Color and clarity are crisp and the ink didn't smear. The ink dried quickly.

I'm always trying different types of paper, but have never found any brand that works as well on my Pixma printer as genuine Canon paper.

I've also received good results on Canon's matte photo paper, but I like the Glossy II paper a little more.

When using specialty sized paper, I find it easier to use the rear tray rather than the cassette.

If you owe one of those new and cool wireless HP vivera foto printers like C4599 then you will love this paper over Kodak paper. It dries fast, it comes out great quality and its fairly cheaper then elsewhere.

Canon claims that the colors won't fade for 20 years, guaranteed. I can't verify the claim because the oldest pictures I printed on Canon's paper are probably 5-6 years old but those look as fresh today as they did the day I printed them. None of them were exposed to direct sunlight for any significant amount of time but some of them have been sitting in my office for that many years, under constant fluorescent light (framed and under glass) and they continue to look great, 5 years later.



I should note that I used the paper with a Canon photo printer loaded with Canon ink cartridges. Canon's original ink cartridges are expensive on a 'per photo' basis and the paper isn't a bargain either but I am more than pleased with the end-results.



I will continue to use Canon paper in the future.

We use this photo paper in a Canon MP620 all-in-one printer, and it produces great quality prints at a good price point. I've tried HP photo paper at a similar price point in our MP620 printer, and the quality was noticeably lower. I'd stick to Canon photo paper for a Canon printer.

I have worked with Cannon products for years and sold them as well and this is a great product. No smudge. Will not fade for up to 30 years in fresh air if used with Cannon Chroma Life+ inks. Also instant dry. This is great quality paper. Cannon also has the Pro Platinum 80lbs paper which is even better but this is a great second choice. You will not be disappointed. - Canon - Canon Photo Paper - Photo Quality Paper - Photography'


Detail Products
Detail Reviews
Click here for more information


Photo Quality Paper - photography, canon photo paper canon photo paper Photo Quality Paper - photography, canon photo paper

Sunday, 6 February 2011

Universal Remote - remote control extender, universal remote


I recently upgraded my TV to 52" flat screen LCD/LED and had a custom cabinet made to hide all my stuff. The cabinet came out great with all my components, players, Xbox, Medic Center PC, cable box underneath and behind solid doors. Problem is when you shut the doors the remotes (aside for the TV) don't work. I tired another brand that was designed to repeat from one room to another but it did not do a good job inside a divided cabinet as it only repeated from the main unit. My problem is the cabinet is divided down the middles with cable access between the sides in the back. Being a big fan of the Harmony remotes I went ahead and ordered their extender. It was a bit more expensive than others but went ahead based on it being Logitech.



Once I received it and opened up it I was surprised at how small and sleek each piece is. Since it came with one blaster and two mini blasters it game me a lot of options. I have one mini blaster on one side of the cabinet plugged into the main blaster and second mini blaster on the other side. The blaster and mini blasters do a great job of radiating the signal throughout the cabinet. The main blaster unit sits on top of my BD player (inside the cabinet) on one side for all connection. I positioned the mini blasters one on each side to cover the remaining components.



The (visible) receiver unit is also smaller than expected and sits at the base of my (black) Sony TV without being seen at all.



There where no setups to go through and the biggest challenge was how to run the cables, which by the way are plenty long enough for any application I can imagine.



Way to go Logitech ! You built a winner !



I highly recommend this unit (BTW: I NEVER write reviews) Logitech Harmony IR Extender System (Black)

i had lots of problems with this.



initially i wanted something to enhance the reception of my harmony one. since its IR powered, sometimes not all of my appliances receive the commands sent from the controller. i wanted this so that all i need to do is to point the control towards the IR receiver.



its not that simple. this adaptor is a BLASTER system. the core item is a BLASTER. you also connect 2 more mini BLASTERS.



the set up must be such that the IR signal from your controller hits the IR receiver, which sends the signal to the extender core unit, which BLASTS another IR signal , then tells the mini blasters to BLAST another set of IR signals, so that the concerned appliance will respond to the IR signal command.



A your set up must be such that every one of these BLASTERS are well isolated, far apart from each other.



B each appliance must only be exposed to ONE blaster. and NOT able to receive the signal directly from the harmony remote.



C the harmony remote MUST NOT be exposed to any of the blaster signals.



D the receiver must be positioned such that it can only receive signals from the REMOTE ONLY. and not subject to IR from other blasters.



in other words, everything must be isolated from everything else.



failing which, signals will cancel out each other. and your appliances will not respond.



i learnt all these from trial and error. hours of them.



and the system is power. WAY TOO POWERFUL. blasters emit such a powerful IR blast its bound to interfere in some way unless each appliance is in a compartment of some chest of drawers with thick walls or something.



seeing that the blasters are too strong, i wanted to buy third party emitters instead, but the jack size is not 3.5mm. so NO GO.



i tried wrapping the blasters with thick tape, foil etc. but without much success, plus its gonna look real stupid. i managed to get some improvement / some shielding effect with thick rubber.



so if you dont think you can achieve all the above criteria, i suggest dont buy this, buy another 3rd party IR extender system, or get the RF harmony remote. otherwise, you will find that the responsiveness would become much worse that if you use the original controller for your tv or sound system. eg you have to press a key 3 times to see a reaction, or try different angles, point this way and that, just to get your volume up one notch on your tv or something. forget about multiple commands like turn on tv and bluray player, then adjust tv input etc.



the only good thing about it is that it is 100% guaranteed to work with the Ps3 adaptor.



its a well made product, but its a way too POWERFUL blaster system. get it only if for some reason, you need high powered IR blasts all around your setup.



if you need IR extension, i would recommend 3rd party systems with emitters attached directly to the IR receiver of your appliance, not blasters. dont worry about emitters looking ugly, cos even the mini blasters are big enough for someone far to notice a weird protrusion easily.



many people buy this because its LOGITECH. but you can possibly buy something of lower price but works much more efficient than this. YES, 3rd party systems work too, cos ITS STILL IR. IT DOESNT HAVE TO BE LOGITECH. - Remote Control Extender - Remote Extender - Universal Remote - Harmony One'


Detail Products
Detail Reviews
Click here for more information


Surfboard - surfboard, comcast


I have been a Comcast high-speed Internet customer for about 5 years. The modem Comcast provided as part of a package deal was a Motorola Surfboard 4100. About 4 months ago, I noticed that I was getting barely more than 1/2 the speed I was paying for, which was 6Mbps. I complained to tech support. They sent a technician out and within 3 sec. after walking into my office, he said, "Oh...I know exactly what the problem is; you have an 'end-of-life' modem. You need to upgrade to a 2.1 DOCSIS modem, and I would recommend a Motorola Surfboard as one of the best." So I got on my favorite shopping site, Amazon, and bought one. Not only did it work perfectly from day one, my average download speed on Speakeasy.net is ~22Mbps -- almost 6 1/2 times what I was getting with the old Surfboard -- and the upload speed increased from ~364Kbps to ~1.6Mbps.



Would other brands do as well? Probably, but I stuck with Motorola because the last one was 100% reliable; never had a problem. The only reason it was not delivering the speed is because Comcast's system had changed and the old modem's software could not keep up with it. I also like the fact that Motorola moved the standby button to the top where it is more easily accessible. I have a new Vista computer and have to put the modem on Standby after putting the computer to sleep, because (not sure why) Internet activity tends to wake it back up.



I found it disappointing that Comcast apparently does not alert its customers when their modems are obsolete. If you're having a similar problem, check with your ISP. If you need to upgrade your modem, I highly recommend this one. Motorola Surfboard SB5101 Cable Modem

Very simple to install (just plug it in), fair price, everybit as fast as the modem I was renting from my cable internet supplier for $3.00/month. You have to call your internet provider so they can do whatever they do to activate the modem in their system, which is easy enough--the tech guy I was talking to basically informed me that this is one of the best on the market.

I bought this modem because my other one started to drop my internet connection. After replacing my router several times, we finally figured out that the modem may be the issue. I have been using this modem for a month and half so far and I still drop connection from time to time. So, I'm not sure if it is the modem, the router, or Comcast. My bet is on Comcast. I didn't have any issues until they took over. The modem was easy to set up, except the part that I had to call Comcast to get it assigned to my account. That took over an hour. So, be prepared to spend time with your cable internet provider to assign this modem to your account before it will work. Hopefully, I can get everything running smoothly again soon.

The modem works as well as the other Amazon reviews suggest. However, ISP Comcast was a nightmare unto itself. Two "technicians" swore that because I purchased the modem (and didn't rent it from Comcast), I would have to wait until one of their mobile technicians could complete the setup! Fortunately, I made a third call and actually (imagine!!!) reached someone in the United States who logged the modem's MAC ID and I was underway without even having to reboot or having to resort to the installation CD. The modem is noticeably quicker than the 3Com it replaced.

Our 'Terayon' modem that came with our 'Adelphia' broadband cable connection died after 2 plus years, so my cable/internet provider swapped out the defective modem for this new 'Motorola'. I was a bit leery and concerned about having to hook up another modem for fear that something would surely go wrong with the hookup on our 2 PC router network, and I would have to call a tech or a consultant. It took about 3 minutes to open the box, hookup the power, cable, and ethernet connectors, and attempt to go online. There was NO software installation, and NO reprogramming or changing any parameters or network settings. NONE! The modem instantly powered up and magically recognized the network and cable data signal, and I was good to go! 'Plug and play' heaven! And the performance is better than the older 'Terayon'.

This modem blows my old Toshiba out of the water. I have a home network and internet phone too, and even when my Toshiba modem was newer, I still had to powercycle / reset it (and my router) every couple of days. However, I have had the motorola for over 2 weeks now and have not had to reset anything on the network. Very solid, and installation was easy. I highly recommend this modem. - Broadband - Comcast - Surfboard - Motorola'


Detail Products
Detail Reviews
Click here for more information


Inkjet Printer Paper - consumables, multipurpose paper white


The HP Color Inkjet paper is 24 lb. paper which is just a bit heavier and thicker than most copy paper. The heavier paper gives a more professional feel when used for business letters or anytime you want to make a good impression. The high brightness make images appear sharp and crisp. Text is also crisp with no evidence of bleeding. In my Canon PIXMA MG5220 Wireless Inkjet Photo All-In-One (4502B017) the paper feeds well from both paper trays with no jamming. What more can you ask?



Unlike the other reviewer my order arrived in just two days. HP Color Inkjet Paper, 24 Pound, Uncoated, 96-Plus Brightness, 8.5 x 11 Inches, 400 Sheets (202040)

I buy HP paper for my HP printers when the price is sensible. I like the brightness, and the heaver weight of the paper makes double-sided printing work well. Ordering from Amazon is easy, saves carrying home the heavy paper and avoids the sales tax. Amazon's great service and quick prime shipping makes this an easy decision.

I bought this paper after I got a new printer that had double sided printing. I heard that lighter paper tends to show through to the other side when printing on both sides. So I turned to this product.



This paper has done well with double sided printing. I did notice a slight show through to the other side, but this paper is thick enough that it doesn't interfere with reading too much. This paper is also very bright. Print seems to be more clear and crisp. Graphics also come out nicely. There haven't been any paper jams yet either.



To sum up, if you are looking for thicker paper for double sided printing, or just want higher quality paper for a report or presentation, then this is the paper for you. - Multipurpose Paper White - Consumables'


Detail Products
Detail Reviews
Click here for more information


Gluten Free Baking - cuisinart, gluten free


We bought this machine based on a recommendation from a friend at work and other reviews we read on Amazon. First of all, let me say that this is a great product. The recipes are easy to follow and the bread is outstanding. We brought the machine with us when we visited relatives over the holidays, and two of them are now going to get machines for their families.



FOR THOSE OF YOU WHO WROTE NEGATIVE REVIEWS, AND THOSE WHO HAVE READ THEM, PLEASE READ THIS!! For my first loaf I went to the store to get flour. At the store I talked to the guy stocking the flour aisle about what kind of flour to use (note that the recipes specify "bread flour"). The grocery store guy and another woman who joined in the discussion assured me that I could use all purpose flour, so that's what I bought. The loaf came out so-so. It was quite dense, and the middle of the loaf was sunken instead of nicely puffed up (many of the negative reviews describe exactly this problem). So I googled "bread flour" and found out that it is significantly different from all purpose flour. It's higher gluten and protein content produces stretchier, chewier bread, but more importantly, it traps more of the carbon dioxide from the yeast so that the dough rises properly.



Equipped with this information, I went back to the store and bought King Arthur BREAD FLOUR. What a difference! My son described it as a 1000% improvement. Every loaf since then has been outstanding.



One more thing. The recipe instructions tell you to set the loaf size and crust color, then select the bread program (white, wheat, gluten free, etc.). You actually want to SELECT THE BREAD PROGRAM FIRST, then the loaf size and crust color, because setting the bread program first will RESET the loaf size and crust color to the defaults (2 lb. loaf, medium crust).

My wife has Celiac disease and a good gluten free bread is impossible to find ready made. We must bake our own bread if she is going to have a bread that tastes good. We have found the bread mix from Gluten Free Pantry is great. but our old bread machine, a Breadman Ultimate was not turning out a consistant product. It was less than a year old and quit working. Which turned out to be a blessing. Based on our experience with other Cuisinart products and the reviews on Amazon we decided on the Cusinart CBK-100. The gluten free cycle is perfect. It bakes the best gluten free bread we have ever had. We have used Gluten free pantry Sandwich bread mix and also Bob's Red Mill gluten free multigrain mix. WOW! THe bread is so good that I even like it. This bread is light and the crust is perfect. It even is easier to slice. If you are looking for a bread maker that turns out excelent gluten free bread this is the one to buy

When our breadmaker of about 12yrs. broke, I search the internet for a replacement. I thoroughly checked out many many many different types and prices. I settled on this Cuisinart CBK-100 and, have been very pleased with the texture of bread it makes. I do however use 2 tablespoons of sugar for a 1 1/2 lb. loaf and use only 1 teaspoon of fast acting yeast instead of 1 1/2 teaspoons. It operates very quiet compared to our older machine we had. I really like the beeps telling you it's time to take the paddle out of the bread so you don't have that gaping hole on botton of every loaf. I strongly recommend purchasing this machine.

Bought this last year and tried about 5-6 recipes several times, at different loaf sizes, using recipes that came with the machine as well as out of reliable cookbooks. No luck. Every loaf collapsed and baked into a dense, inedible mound of dryness. Tried to return it, but had passed the Amazon return time. Cuisinart was not particularly helpful--made us return and try another machine twice even though I explained that I thought the issue had to do with the rise times programmed as part of the equipment, not the product itself. Fortunately, since we live in California, the shipping back and forth costs were paid by the company (CA law). Finally, after the third return, they gave us credit, which we ended up using on a different product. That nonsense took a year and many phone calls to negotiate! As a longtime Cuisinart customer, I found their customer service lacking in quality. Since then, I have started baking by hand, using a wet dough recipe from the PBS show America's Test Kitchen. Also considering trying the cookbook, _Artisan Bread in 5 Minutes a Day_--as making bread is relatively easy--but the timing is the hard part--while adapting some "high elevation" tweaking to the recipes (didn't grow up baking at high elevations so that has been a learning curve). The low star rating is for the issues we faced with Cuisinart in returning the product, which does not adapt to high elevation climates. I wish Cuisinart would address this issue by building better time options into the machine design.

I bought this product in August and it worked great for two months. Then the touchpad stopped working. Customer service told me how to reset it and that seemed to work. The paddle broke during making the very next loaf of bread; it took 4-6 weeks to get a replacement paddle as they were "back-ordered". I made one loaf successfully when the new paddle arrived. During baking the second loaf, the heating element quit and I was left with a half-baked loaf. I called Cuisinart asking for a refund and was told they don't do that, but would send a replacement machine, shipping at my expense. I did talk them into paying the shipping, but they have no expedited shipping so I will wait a couple of weeks for the replacement. I have to return the old machine at my expense. This, in my opinion, is poor customer service. I hope I got a dud the first time and that the replacement is problem free or I will be out $90. By the way, they only give the remainder of the original warranty on the replacement. When it worked, it made good bread, but think twice about buying this product.

Cuisinart CBK-100 Programmable Breadmaker - Cuisinart - Gluten Free Baking - Gluten Free - Baking - Cuisinart Bread Machine - Bread'


Detail Products
Detail Reviews
Click here for more information