Monday, 6 April 2009

Impact Drivers - 18 volt, impact drivers


Not long ago a friend gave me an extra DeWalt 18 volt drill he'd come into. I'd been using a 12 volt Makita for over a decade, and I was impressed with how much more torque and battery life the DeWalt had. The same friend also had a DeWalt impact driver from the same series, and again, I was impressed how well this handled mechanical tasks usually relegated to a pneumatic impact driver. But even more impressive was how well the DeWalt worked for driving screws.



A few years ago, the major cordless tool makers started to come out with impact drivers which they marketed not to mechanics, but to carpenters. While today's 18volt cordless drills do a pretty good job of driving screws, they still start to bog down when driving really long screws into hard or resinous wood. The slow, stall, and eventually overheat. But impact drivers don't do this. They work on a different principle, using a motor-driven hammer to repeatedly strike an anvil that drives the output shaft. As the load increases, they switch from spinning to a rapid-fire staccato impact mode, in which every impact turns the screw a bit farther, while the motor continues to spin and bring in cooling air.



I was very pleased to discover that Amazon had a DeWalt impact driver available in a batteryless and caseless package (for those of us who already have a charger and several batteries) for about $125. I purchased mine for a mix of yard projects- this is a great tool for driving the big screws used to tie landscape timbers together- home projects, and motorcycle/scooter maintenance. And amazingly, it's even lighter and more compact than the DEWALT DC759KA Heavy-Duty 18-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit. I'm giving away my Makita 12v drill/driver to a nephew who likes tools and gadgets, and switching 100% to the DeWalt system. Bare-Tool DEWALT DC825B 1/4-Inch 18-Volt Cordless Impact Driver (Tool Only, No Battery)

I bought this last year after my Black and Decker 18v drill died it's 3rd death. I got it in a 4 tool combo kit on sale at Lowes. I build haunted houses for the Halloween season so most of what I do construction wise is with rough and sometimes very old and hard woods. The woods are also made super tough (like rock) from a chemical that must be sprayed on them to make them fire retardant. I found that before, even with an 18v drill that screws would shear off before going into the boards which made it difficult to make secure connections in the wood. It is hard to make something look old and spooky and still have it be safe so having good, solid tools is a must. Right after I charged the battery I tried this tool out. Wow!! It drove a 3 inch deck screw into an old hardened 2x4 in the blink of an eye!! I had never used a tool like that. It quickly became a favorite of mine on the jobsite. I used it hard and it never once let me down. I bought it toward the end of the build so I only got to use it on a few hundred screws but never a disappointment. I'm looking forward to using on this season's build as well as in my volunteer work with Habitat for Humanity. I would highly recommend this tool to anyone who builds.

I bought this tool to add to my dewalt collection. I have had the 18volt dill for years and did'nt think that I need an impact driver. I was wrong. I am using the impact more that the drill for driving large screws. It make the jobs much easier. The driver was shipped by a third party and I received it in just a few days. I was very impressed. This is an excellent tool if you do lots of repair work with 2 by lumber.

I have long been a loyal DeWalt costumer, especially when in comes to cordless tools like the 18v drill I purchased 6 years ago. That drill quickly became my favorite tool and has seen constant use since. In fact I was so happy with the drill that I did not see any reason to buy an impact driver, until a couple of projects I was working on required me to drive a large number of constuction screws and lag bolts. My drill was able to drive them but not as easily or quickly as I would have liked, so I decided it was time to give the impact driver a try and my only regret it that I did not buy one sooner. This driver is by far the best power tool I have ever owned. It is absolutely necessary for driving lag screws or anything comparable but also preforms so much better in less demanding tasks like running deck screws. I have discovered that it is also quite handy for boring large holes even though that is not the intent behind the tool. If you put an Irwin Speedbore bit in this thing it will chew through 4 by lumber in no time. Using the driver for boring has saved my wrist on a number of occasions as those Speedbore bits require quite abit of torque to run and if the bit binds up while using a regular drill all that torque gets transferred to your wrist. Now that I have a set of Irwin Speedbore and Spade bits plus a decent hex drill bit set my drill is relegated to drilling metal and the occasional pilot hole.

This driver is also much better at removing rusty and stripped screws than my drill, just another unexpected bonus.

Without exception this is the one tool that goes with me to every job. - 18 Volt - Cordless - Dewalt - Impact Drivers'


Detail Products
Detail Reviews
Click here for more information


Impact Drivers - 18 volt, impact drivers 18 volt Impact Drivers - 18 volt, impact drivers

Stinger Stapler


Absolute garbage. It malfunctions about every other shot. The caps advance the wrong amount (either too much or too little) and that causes it to not cut the connection between caps. As you withdraw the tool, you unwind a bunch of caps. Now you have to cut the connection with diag cutters or utility knife. And you have to get the caps rewound back into the reel. About 3 minutes wasted every other shot.



And that's after practicing for a while and getting good at slapping it at a certain angle.



Good concept, horrible execution. CH38A'


Detail Products
Detail Reviews
Click here for more information


Stinger Stapler Stinger Stapler Stinger Stapler

Tv Screen Cover - tv guard, tv screen cover


This tv protector fits on our new 46 inch Samsung LED LCD very well. You cannot say it is installed on the TV. After spending a good amount of money on our new HDTV my husband thought that the TV screen protector would ruin the TV looks but that is not true at all.



My son tested the protector the first day we had it on. It is also great for protection from Wii players - my older sun being one of those. Installations is easy - the only thing is keeping it away from dust while unpacking. The protector just sticks on the TV - we had it for about four months and I only took it off once to see how that works - basically it clicks on and off to the fasteners that remain on the TV. There wasn't much dust on the TV screen or the protector.

It seems impossible to me that someone will break the screen of our 46 inch TV with the protector on.



Several of my friends with children also got this TV screen protector and it seems to be working great for all of them as well. Anti-Glare TV-ProtectorTM Stylish TV Screen Protector for 46 inch LCD, LED or Plasma TV - Tv Screen Cover - Tv Guard'


Detail Products
Detail Reviews
Click here for more information


Tv Screen Cover - tv guard, tv screen cover tv screen cover Tv Screen Cover - tv guard, tv screen cover

Ipod Touch Screen Protector - ipod accessories, ipod touch


After reading the various reviews on this item, I was on the fence about applying this to my shiny new iPod Touch (2G) 32GB. After all, it's an expensive gadget! Needless to say, I am very pleased with the outcome.



I ordered my 3-pack through Bargaincell and they do indeed cover the entire face with an upside-down "U" cut out in the bottom to make space for the tactile "Home" button. They are also crystal clear and do not impact the visual appearance of the LCD screen nor do they impact touchscreen sensitivity in any way (that I could notice, and I'm quite nit-picky).



I methodically install screen protectors on all of my gadgets the day I get them. So here are some tips I've come up with while applying this particular protector:



1. Try to do this under very bright lighting (such as under a desk lamp) so it's easier to see any stray dust.



2. Wash and dry your hands thoroughly before handling. Blow on your hands and rub them briskly together to remove any towel lint.



3. Use the included cleaning cloth with a drop or two of water to remove all existing residue and finger smudges.



4. One you remove the thin backing to expose the light adhesive, only handle the protector by the long edges. Making the letter "C", you should hold it in your hand as if holding a playing card (palm facing down).



5. Since the protector is very difficult to remove without damaging it, take the included smoothing card (or the edge of the backing you just removed) and place it under one corner because chances are, it WILL take several attempts to align the protector perfectly.



6. If you are correctly holding it at the long edges, the protector will bow downwards. Just before you apply it to the center of the iPod, gently blow across the iPod's screen to remove any dust particles that have landed over the past few seconds.



7. Slowly place the protector on the iPod's screen and allow to slowly flatten from the inside to the outer edges. Do not let go until the last possible moment. Fortunately, this protector is stiff enough to eliminate most (if not all) bubbles along the way.



8. If it is aligned to your satisfaction, gently remove the smoothing card from the corner. If not, use the card to gently peel up the protector and try again.



9. Once aligned, use the smoothing card to smooth out any stray bubbles near the edges.



10. Enjoy your protected iPod! iKross 3-Pack Premium Reusable LCD Screen Protector with Lint Cleaning Cloth for iPod touch (Clear)

I initially got this for my iPod Touch 2g. It does what it says it will do, BUT it attracts fingerprints and smears like crazy! I thought this was simply the price to be paid for protecting the screen.



However I was in a coffee shop the other day and this guy saw me cleaning my screen. He asked me if I had a screen protector on it and I said yes.



He pulled out his iPhone and handed it to me and said "Go ahead swipe, touch and tap it."



I did and much to my surprise THERE WERE NO SMUDGES OR FINGERPRINTS! I noticed that when tilted a little it had a slight non reflective satin sheen to it rather than a glossy reflection like mine did.



I asked him where he got his screen protector and he told me at the online apple store.



I did some research and found out the company that makes it is called "Power Support".



You don't have to get it at the apple store tho, you can get it here at Amazon or other places. Just search for "Power Support Anti Glare Film".



It IS around $15.00 for a set of 2 screen protectors.



HOWEVER, for the ability to have a smudge and fingerprint free iPod Touch and to reduce the glare on the screen, I was more than willing to pay the price.



Hope this helps!

These are great and the price is right for a 3 pack of them. It was not too challenging putting this protector on.(Hint, only hold the sides of the protector when applying it to the iPod) This protector is crystal clear, I cant even tell that its on. The protector covers the entire front of the ipod touch (except the home button) though, it seems like its a slightly smaller, Im, not sure because i could of placed it on a little crooked. Which you cant even tell if you use a sleeve or iClear cover as I do.

I bought this to go with the Griffin 8167-ITCLR iClear Hard-Shell Case for iPod touch and having them both together makes me feel more comfortable about my ipod touch being well protected.



I'm !00% Satisfied with this product.

If the shipper is Eforcity you will not receive the product in photo.You will receive a partial screen protector sized to cover the "touch" portion of the screen. It's not IKross but from company called Insten. When I asked for the full screen as I had ordered they kindly and quickly sent a replacement but unfortunately it was the same wrong product.



If partial screen is what you need, then the product is fine.

As mentioned in a previous review, the photographs for this product clearly show an iTouch 2G, with the hole for the home button rather than an inverted "U" that would work with the 1G.



Nowhere in the product description does it state the product is for 1G only. Yet the package clearly states "Suitable for Touch 1G [sic] Full front."



I wrote BargainCell requesting an exchange. They told me to give them a CC number for reshipping charges. Reshippping charges?!? The cost of the product was 1 cent and the shipping was $2.98 (while another vendor had the price as $2.99 with free shipping). I told them I would not pay any more shipping for their inaccurate description. They responded that their description clearly said the protectors were for the iTouch and not for the 2G. What, in heavens name, do they think the 2G is?



This 1G product might work, but it is not designed specifically for the iTouch 2G - their deceptive pictures of the 2G notwithstanding. It is unethical and dishonest to use a bait-and-switch with your customers and then refuse to make it right. Thank goodness for Amazon's "A-to-Z Guarantee" for third-party sellers.



If you're thinking of buying anything from BargainCell - Caveat emptor!



UPDATE - 2 June 2009: After posting this negative review and filing an A-to-Z claim with Amazon, I got an email from BargainCell promising to send the correct product at no additional charge. So, I canceled the claim and waited ... and waited. After almost four weeks - and nothing from BargainCell - I realized they were not going to make it right, so I re-instated my claim. When I did so, I copied BargainCell on the email to Amazon, to which they said ... nothing. Today the refund came through and still no word from them.



I've gotten stuff from BargainCell before and it has been pretty good. This was a real surprise for me ... but educational. I don't care if they're selling iMacs for a nickel, I'm not buying. And neither should you. - Itouch Accessories - Screen Protection - Ipod Touch - Ipod Accessories'


Detail Products
Detail Reviews
Click here for more information


Ipod Touch Screen Protector - ipod accessories, ipod touch ipod accessories Ipod Touch Screen Protector - ipod accessories, ipod touch

Rotozip


I bought this to use for removing underlayment below toe-kicks (see my review of the Rotozip RZ20-4500 for full description). It cut through 1/2" plywood underlayment with linoleum over it with no effort at all, as expected. The pleasant surprize was that it also went through a couple of hidden nails without trashing the blade. This blade uses a bonded grit for cutting rather than teeth.



The resulting sawdust is fine. It clouds the air and floats around the work area. This could be expected so I can't downgrade the tool as a result. Keeping the nozzle of a vacuum cleaner close to the cut keeps the sawdust from going everywhere. This helps keep the homeowner happy. Rotozip XW-WD1 Flush Wood Cutting Wheel

I bought the RZ20 and this blade to cut some laminate flooring. The blade does not fit under the stock shield. You must buy an extra shield called the x-shield for it to work. So after buying the blade, I had to buy the x-shield which includes the same blade, lol. I was only cutting 5 feet of flooring, so I wasted $30.



If you have not bought the x-shield, buy it instead of this blade. I got mine at a home improvement store for $10-15 more than the blade itself, which is included for free.



I was tempted to mark Rotozip 3 stars for nickel and diming their customers. There is no reason they cannot make one shield to fit both the metal and wood blades. It is just an attempt to squeeze more cash out of people. Not only that it makes the tool more difficult to use and store.



I decided to go with 4 stars, because other than poor design which forces people to spend more money on accessories, and spend more time swithcing the shields around it does do a good job.

I am putting down 60 cases of Pergo laminate flooring. At first I was taking the base boards off, cleaning them and reattaching them after I put the flooring down, then I saw this wheel for my Roto Zip and decided to give it a try. After a few practice attempts, it proved to be much easier to trim the base boards in place on the wall. Where this little blade really paid for itself was around and under the door jambs ! With the base boards cut in place and the door jambs nicely trimmed, the floow just slide right under in place. A little latex caulking to fill the SMALL gap, some touch up paint and it looks like a pro job !



The only complaint (why it did not get 5 stars) was after a about 10 feet of constant trimming the wheel began to smoke when cutting ? Mind you I am cutting HD type pine base board moulding. Rather than making a continous cut, it became necessary to make short plung type cuts along the board. Not a big deal, just not efficient. The sticking of the blade( and smoking) may be due to a build of of "tar/resin" from the wood ? The claim to cut 100 feet of "laminate flooring" (much harder than "pine" moulding) might be stretching it a bit, but overall the little blade works for me and saves a lot of time and labor for this homeowner.

I BOUGHT THIS TO CUT SOME FLOORING AND IT DID DO A GOOD JOB, BUT IT CAN ALSO BE WORN DOWN KIND OF QUICK, I WAS STILL HAPPY WITH THIS. IT DID CUT DOWN THE TIME AT CHIPPING AWAY ON SOME OF THE FLOORING, SO YOU MIGHT WANT TO ORDER 2 OF THEM , BUT OVERALL IT DID IT'S JOB.



R.FLORES CA

I purchased this for use with my RotoZip RZ20. I replaced the flooring in two rooms and this added an additional height of 1\2" to the exisiting floor. I used it to undercut the trim around the door frames. This cutting wheel has a diamond coating on it's edge so it doesn't look like a regular wood saw blade. I did use it with the RotoZip flush cutting attachment and wore gloves for safety in case of kickback. The blade made clean cuts, I found it best to proceed slowly and let the tool do the work.'


Detail Products
Detail Reviews
Click here for more information


Rotozip Rotozip Rotozip

Cordless Drill - drills, lithium-ion


Ive been using this gun for a week now and it has performed better than expected. I use my ridgid cordless tools everyday at work for the last 5 years. If you dont mind a heavy solid tool ridgid is the way to go. Im using my 18v 2.5ah ni-cad batteries and it workes great. I want to buy some 24v batteries now. I drilled threw 15" of solid wood with a 1 1/8 auger bit in low gear and it never slowed down i didnt even have to stop partway to clear out the woodchips. ALWAYS use the second handle while doing high torque tasks I burned out my last drill that way. Only one thing ridgid needs to fix is that the trigger sticks under massive torque while not using extra handle. Ridgids hammerdrill is just as good if not better than others like dewalt. The clutch on a ridgid gun is better than any other ive used. Dewalt has the worst clutch ive ever used. RIDGID 24V/18V Max Select XLi Lithium-Ion Hammer Drill

I purchased this item as a replacement for a lost or stolen identical item. This the most powerful battery powered drill that I have ever owned. The battery life and recharge time is exceptional. Though a little on the heavy side, it has done everything including drilling through 10" concrete. No problems to date.

Okay, I haven't used it that much, but this drill is awesome. It has so much power, the handle is really helpful. The drill is really heavy, especially with the 24V batteries. The Maxselect tools I've used with the 18V have not really worked that great, although I haven't really used this drill with the 18V batteries as I have an 18V drill. The 24V tools really do work best with 14V batteries. The 24V batteries are hard to come by, especially if you want the lifetime service agreement only available if you get it from an authorized seller (ie HD). The brake works well and you can change bits just by turning the chuck sleeve. You could probably turn screws even with the drill stopped (although I've not needed to do so with this drill yet). I can't comment on longevity, but I've read enough reports of premature failure that I'd think twice buying this one to use if my livelihood depended on it. It's really too heavy for many tasks, but when you need a big drill, this drill works great.

The chuck is bad and i know someone else with the same drill and he has the exact same problem.



Bought when the kit first came out 3 years ago or so. Drill had a jacobs chuck (keyless - u just grasp it and spin the drill and it locks up and this is the prevailing set up for all drills now). Anyhow, since the day i bought it, the chuck would have difficulty equally "snugging" itself around the shaft of anything i put in it, whether a round drill bit or hex bit. I would almost always (literally 90% of the time) have to redo it at least once, sometimes 7-8 times, before it would seat properly and there have been times where i literally gave up.



I lived with it assuming it was just "my" drill even though I scrutinized the chuck "well" closely and could see nothing wrong with it. Then a sat dish installer came over to my house one day and i noticed he had the same set up. So we were talking about it and I asked him if he had any trouble with the chuck and he just looked at me and he said "Yes! I thought it was just me or just this drill but you are having the same problem???" So the point is that I know it is not just me or my drill and also, I am a contractor with 30 employees, all my friends are contractors, so i buy tools by the truckload.



If I were using this as a professional installer, I don't know how i'd live with it and I use it strictly for home projects where speed isn't issue.



In addition, my drill has recently developed some sort of motor problem. While drilling at full speed it will increase/decrease RPM without my adjusting trigger pressure so the motor is either going bad or the relay is going bad. This is sad because I would say that as far as usage, I would be an the lowest end of the spectrum meaning I rarely, rarely use my drill. It barely had a scratch.



It's too bad because the power and the batteries are amazing and the rest of the kit is great. The saw and sawzall are amazing but I cannot recommend at all in fact, avoid this drill like the plague. - Lithium-ion - 18v - Hammer Drills - Drills'


Detail Products
Detail Reviews
Click here for more information


Cordless Drill - drills, lithium-ion 18v Cordless Drill - drills, lithium-ion

Harbinger - fitness, harbinger


Being a poor college kid, I didn't want to join an expensive gym but still wanted a good workout. Fortunately, I stumbled upon the idea of jumping rope. Boy did this kick my butt. I work out 6 days a week on my crew team but this definitely is helping me keep in shape. I'm also short (5'3) but the one time adjustment works perfectly. The handles are very comfortable for long uses. Though the rope will give you a couple of whip marks when starting out but that only forces you to learn faster. Overall, this is a cheap and effective solution for a great aerobic workout indoor/outdoor. Harbinger 331200 Trigger Handle 10-Foot Adjustable PVC Jump Rope

I've been searching for a jump rope like this for months. I wasted my time and money on non-adjustable 9' , over the counter jump ropes. This "Harbinger Trigger Handle 10-Foot Adjustable Jump Rope" has the perfect handles that contour to your hands and I was able to easily adjust the rope to my height. For a small purchase price of $10.00, I have a great tool to assist me in my cardio training and my overall health.

when i read "adjustable" i thought spring loaded awesome one touch, but this very nice jump rope is a one time adjustment deal. I don't have to share so that's fine with me, so know that. It is a very sturdy well made jump rope. If you share with someone your height or don't share at all i highly suggest this jump rope.

I've used MANY different ropes in some 25 years of working out with jump ropes, and at first, I loved this one. The handles are very comfortable, the weight feels good, the rope moves fast. Unfortunately, though, it's made badly. I used this perhaps half a dozen times (about 45 minutes each time) before the rope broke at one of the handles. So back to the drawing board...

Shipped on time, happy with that.



Compared price with in-store (Bought this at 6.99): Good buy.



Material: Pliable, smooth, heavy.



Function: Speed rope; the rope material is heavy enough to put up some good speed. Handles are comfortable, rope swings without getting rolled up. When storing, the rope will take the shape of how it's stored. If you roll it up, there will be kinks. There are kinks when you first open it for use. I simply just stepped in the middle of the rope and stretched out both ends. If you're really worried about this, you can heat it up with warm water or one the stove or something. If you're really worried.



Not for use on rough floors. On the mat/tiling/wood floor that I use this on, the rope is fine. Been using it for several months with little wear or tear.



If you're trying to use it on gravel or asphalt or some other rough surface, it OBVIOUSLY will not endure for a long time. Get real, all the people with complaints. That will happen with just about any kind of speed rope.



Adjustable?: It's a one-time adjustment. I kind of expected this so it was exactly what I wanted. Adjusts through the handle; you have to use scissors to cut off excess rope, then pliers to fasten a metal clasping. You can adjust to to be shorter, or course, assuming you're resourceful. Use a paperclip instead of the metal clasp that it comes with. (Mine came with a total of four clasps; two were already in place, and two extra, which was good.)



Good workout. Jump rope burns as much if not more fat than other cardio exercises like running. When adjusting the rope (assuming you're going for speed function), stand in the middle and hold the handles until they just reach your armpits.



Five Star Rope. Be realistic with what you buy. It's not a product designed to last forever, especially when you use it incorrectly.

Skipping rope has been apart of my fitness routines for about 10 years now, and this rope is one of the most comfortable easy to use ropes. The adjustment problem everyone is complaining about is probably because they don't know how to adjust it. After popping open the end caps, you're supposed to clamp the metal lock wire with pliers. Each clamp can only be used once. I've never had an issue with it. However, I will say that the rope material wears entirely way too fast. My ropes generally last a 6-7 weeks at most on a 3 day a week rope routine thats 18-21 days of use. Not at all impressive. The middle always gets torn up from hitting the floor. Thats my only complaint with this product. The weight is good, the adjustment method is just fine, and the trigger grip allows you to hold on comfortably without over gripping. It's price is low enough so it makes up for the lack of integrity in the material. It'd be nice if they were sold with a spare cable and extra clamps.

I have this and the Bally Hyperformance speed rope (which is basically a buddy lee rope). I never use this one, i always use the buddy lee because its faster. This rope is fantastic, you can lengthen and shorten and change it back and forth all you want. Its a bit heavier, and not near as fast for me as the buddy lee. Also, it will make your arms get tired faster, which bugs me but this might be ideal for another person. Not as good as the buddy lee (for me), but much cheaper and still a 5 star product.



*The guy below said this is non-adjustable. It adjusts fine. The back cap pops off, and you just loosen the knot, make it the length you want, and stuff it back in the handle. I have no idea why he said that, this actually adjusts very well.

I've gone through a recent fitness craze, and ended up purchasing a few "at-home" workout items. This jump rope has been perfect. It's a huge upgrade compared to the tiny, pasta-shell-like ropes I'm familiar with. This rope spins smoothly, has an attractive feel, and the handles are great. It was the perfect length for me at 6' 4". The rope handles come up to my armpits with one foot standing over the center of the rope on the floor.



If you're interested in alternative cardiovascular activities, or are hoping to stay active indoors on a rainy/cold/hot (Florida..) day, then this it. - Speed Rope - Harbinger - Fitness - Exercise'


Detail Products
Detail Reviews
Click here for more information


Harbinger - fitness, harbinger fitness Harbinger - fitness, harbinger