Friday, 31 October 2008

Garmin Nuvi 260w - gps, garmin nuvi


My Prius has a rough dashboard and a windshield that slopes very sharply. Thus, the suction cup mounts are not good solutions. Fortunately, the friction mount is a great solution. It works much better than I expected. Very stable, does not slide, and lets me adjust my Nuvi to a variety of different angles. I can place the GPS anywhere on the dash or even on the center console. Also works great when transferred to my wife's Ford.



Only downside to the device is that it has a rather large footprint, but not prohibitively large. I like the fact that I can easily use this in both of our family vehicles depending on where we need the GPS.



UPDATE: Now that I have used this mount regularly since May, I have to say this is the best mounting solution I've found for a GPS or any other device for my car. It hasn't slid out of place once!! Given the rise in GPS units being stolen from cars, this mount allows you to easily stash your GPS Unit and mount out of sight and then put it back into position with ease.



2009 Update: Still using this in my Prius and my wife has one too. It's held up quite well. It IS a bit bulky to store out of the way when not in use, but still a good solution. I usually remove my GPS from the mount (a simple process) and then place the mount as far under the seat as it will go. Not perfect, but the best solution I've found to date. Garmin Portable Friction Mount

This mount works great. The selection of Garmin mounts is confusing as some are two parts and some are one. If you have a Nuvi with the included windshield mount, then this is the only part you need to buy. The included mount disassembles at the ball and socket joint and attaches to this one. I can't say it will never come off the dash if I do some really high speed maneuver, but so far it's held steady for all regular driving.



I like that it's easy to move the mount and gps unit down to the floor when I park. Yeah a thief could still see it if they came right up to my car but at least it's not obvious from halfway across the parking lot like a windshield mount is. A thief that sees an empty windshield mount is probably going to assume (correctly) that I've just put the unit in the glove compartment.

I have become addicted to my Garmin Nuvi 660 and used it for six months with a successful windshield mount. But now I have bought a new car. I discovered that the windshield suction mount left an ugly black ring on the window of my old car. (I assume I can get this cleaned up when I detail the car for selling.)



So no way was I going to put one of those on my beautiful new car. I tried the Garmin dashboard mount but shied away from the "permanent" disc. I found the "temporary" disc was just not up to the job of holding this device in place -- at least on my vehicle. I found this very frustrating. I read about the Portable Friction Mount, found a Best Buy store that had it in stock and ran out to buy it.



Though it is not terribly good looking, it does the job very well. I tried whipping around a few tight turns in parking lots and the whole thing stayed put. As another reviewer said, this lets you easily remove the thing and put it on the floor so it's not obvious. That may be more valuable than you would think. I know somebody who removed his Garmin Nuvi (and took it with him) but left the window mount in place. The car was broken into and the window mount alone was stolen. (Probably that was a pretty frustrated thief.)



Also, this will be easy to transfer to a rental car. And it will make it easy for my wife to borrow my Nuvi. Hmmm!

While the friction mount on the bottom of the beanbag is pretty darn stable even with stops, starts, and turns I sometimes would find it sliding across the dash. The solution has been to use one of those little 6x4 inch mats sold at Radio Shack or Walmart for keeping cellphones on the dash. The mat is sticky on one side but leaves no marks or glue. I have not had one slide since using the mat. I even bring the mat with me in rental cars. This gives a very secure mount that is very easy to take from car to car.

The first time I tried this mount was in a rental car for a Garmin C530, and I never thought it would stay on the slightly sloping dash of the Pontiac Grand Prix but it held firm going up and down San Francisco's hilly roads. That prompted me to buy one for my car. Essentially this mount is a bean bag with a mouse pad like rubber base but its engineered to stay where you put it and not slide around unless you move it. The good thing is that it stays put even if you brake suddenly, and if you drive in bumper to bumper rush hour traffic like me every day you'll appreciate this even more!



The advantages are:

- No sticking on windshield. This is a BIG advantage as the windshield mount starts to come off easily after a year of usage, less if you leave it in your car while it's parked in the sun. There is nothing worse than your GPS sliding off while you're driving round a tricky bend, especially if you are new to the area. Sometimes it can be downright dangerous.

- The windshield mount also alerts thieves that a GPS is in the car. A friction mount can be placed down under the car seat when you leave the car without needing to disconnect anything so that you're ready to go quickly when you come back to the car.

- The other big advantage is the ability to move it around to the position you want it. If a passenger is sitting in your car you can just slide it to their side and they can input the information while you are driving. It also makes it easy to slide it closer to yourself. Since I have the Nuvi 660 I often make calls with the bluetooth feature while driving, it is easy to slide it towards me when I am speaking to someone in order to get better voice reception.



This mount works for all Nuvis as they have the "snap the ball in the joint". If you buy any model of Nuvi then this is all you need, no other adapter parts are needed. It's also easy to switch this mount between cars or move it to a rental car when you travel. It has been the best and most useful accessory I could buy for my Nuvi 660. - Garmin Nuvi - Dashboard Mount - Gps - Garmin'


Detail Products
Detail Reviews
Click here for more information


Garmin Nuvi 260w - gps, garmin nuvi garmin nuvi Garmin Nuvi 260w - gps, garmin nuvi

Stanley Bostitch


I needed to do a New Roofing Job for my Daughter. A 10' by 12' outbuilding. I purchased Roofing Nails, thinking I would get plenty to do the job. WOW! I got enough to go into Business. An option should have been offered for a small amount, at least by half. 7,200 is a LOT of Nails Bostitch CR3DGAL 1-1/4-Inch Smooth Shank 15 Inch Coil Roofing Nails, 7,200-Qty.

I receieved the box in 3 days. Great shipping speed. However the box was smashed on one end and most of the coils had to be reformed to fit in the gun. Besides having to reshape the coils the nails themselves fire great with my new Bostich nailer. Have had no misfires after about a dozen coils and no half sunken nails. All in all they are great nails but i would buy them locally if i could find them to avoid the outrageous $30 shipping charges

Stanley Bostitch CR3DGAL Galvanized Coil Roofing Nails



I purchased these nails for my Hilti RFC134B roofing nailer and they worked great. Hilti uses a "High Wire" collated nail and Bostitch nails are a "Low Wire" collated nail. I did not have to make any adjustments at all and it is great to get a product that is available for my old gun that has been out of production for some time.

I purchased these nails and paid the additional freight charge rather than buying at Home Depot etc. because one of the web sites I visited said the Bostitch nails were made in USA. When I got the nails I found they were made in China. Just because something is advertised Made in USA doesn't mean it is. One needs to double check.'


Detail Products
Detail Reviews
Click here for more information


Stanley Bostitch Stanley Bostitch Stanley Bostitch

Fan Controller - computer fans, core i7


When I got this Cooler, (Being in the big box that it is) I was very ecstatic knowing that it will solve my cooling problems. Now to be honest, this wasn't the ONLY product I bought to reach my goal. I paired this with a Cooler Master CM690 case that includes a front fan and a back fan (+ 2 fans for the top) for max airflow.



My situation was that I had a Micro-ATX case with a Quad Core, an 8800 GT (The hot hot GPU), two HDD's and a tv tuner smacked right close to the Graphics Card. You can imagine what kind of MESS it made. My temps were 63C on 8800 GT and 50C on the Quad Core, Which is a Phenom 9500. Ambient temperatures were near the 50's and all of it - ON IDLE! My comp shuts off without notice when playing games that use both the CPU and the GPU semi intensive to Intensive.



Now on to the Cooler; this cooler is HUGE. Not too heavy, but it's definitely big. The cooler that I had (Stock), could fit 6 times in this baby. It's only an inch away from the side panel, where I was planning to attach another fan but the performance of this cooler really brings no need for this.



I will say that it's a bit tricky to install. For you AMD users, you'll have to remove the existing retention bracket and install the one that comes with it, and also a supporter at the back of the motherboard. One thing's for sure - READ THE MANUAL. One thing they don't tell you is that you have to flip the Motherboard upside down while the cooler is in place to fasten the back supporter. Definitely tricky to install. I took an example from 3D GAME MAN on his youtube. Definitely helps if you need visual explanation. To top it off they added a nice red LED light inside.



The Results;



Previous Setup w/o V8

CPU IDLE 52 C

CPU LOAD 65 C

GPU IDLE 60 C

GPU LOAD 75 C



New Setup With V8

CPU IDLE 32 C

CPU LOAD 40 C

GPU IDLE 55 C

GPU LOAD 63 C



Conclusion; So this is on a fairly decent setup. My Phenom is OC'd to 2.6 Ghz and the temp budges a few degrees but not much. This type of cooler doesn't quite live up to its potential on this type of CPU, but I can assure you that dropping your CPU temperature by 20 Degrees does wonders in the overall ambient temperatures. WONDERS I say! This is because there's a point where the 8800 GT's fan starts to make a lot of noise. This is when it exceeds 65C. If you manage to keep it below this temperature, it won't make a noise. This is another bonus when dropping the ambient temperature and i'm glad I waited till Amazon got this baby back in stock, it was worth the wait! Cooler Master V8 Nickel Plated Copper Base Aluminum Fins 8 Heatpipes Core i7 1366 CPU Cooler - (RR-UV8-XBU1-GP)

Pros: Well built, good mounting Hardware, included two thermo compounds. Works nicely, keeps i7 very cool with little noise. Fits in my Antec Mini p180 case with almost an inch to spare.



Cons: Bad instructions, Showed air flow to be opposite of what it really was (so I had choice of removing heatsink, or taking out fan and reversing it, cost me an hour, I recommend you test the air flow direction before installing if you can). Some of the screws go in clock wise, some counter clock wise, Instructions don't show this well, and threads go messed up trying to screw them in the normal way.

Bought this CPU cooler for a new build. It's sitting atop an Intel Core i7 920. With the CPU under load, core temps only reach into the low 40 celsius range. Cooler Master includes everything you need to bolt this guy on, whether you are Socket 775 or 1366.

Pros:

Keeps my i7 920 cool below 69 degrees C (realtemp.exe) under 100% load, Prime 95 stress test, 8 threads, maximum burn, 3 hours. Ambient temperature 78 F. The processor is overclocked to 3.41 ghz, stock voltages. I used Artic Silver 5, applied as per instructions on AS5 website, and a Cooler Master HAF 932. My mobo is an EVGA X58 the A1 variant, with Vista 64 SP1.



It looks good with the red led, and the "V8" logo. It is also very quiet even when the fan turned up to high.



Cons:

Frankly, I expected better cooling, reading the reviews here and on another site. But the problem with user reviews is you don't exactly know their test settings are, ie ambient temperature, case, motherboard, tim, and especially what "full load" or "load" means to them. And no, sorry, Crysis, Steam, and iTunes and an AIM client at the same time isn't full load (especially on the i7). You really need a synthetic like Prime 95 or Orthos to really burn it, for comparisons.



Of course this is my first i7, so I don't have any personal comparisons. But my E8400 ran much cooler 60 degrees max with the a TRUE and it was clocked at 3.8ghz. So maybe i7's just really run hot. Besides at 3.41 ghz I score a 40,000+ on 3dmark Vantage CPU score, which definitely must be a fluke since the top system globally is an i7 965 @ 4.4ghz with a cpu score of only 27,000+. But I've done it four times and I get the same score on average with standard deviation of less than 0.05%, so okay, I'll take it.



The installation was a bit tedious. It is probably best done with two people. And the screws on the stand-offs also needs to be turned counter-clockwise, something not exactly specified on the manual, which can be frustrating. Finally, the manual I received had the picture wrong. The unit has to be mounted with the V8 right side up with the case standing up, not upside down as shown, so the fan will blow from right to left, outside your case.



Other thoughts:

Cooler Master has the exact measurements on their website. So you can look at that if you're wondering if it will fit your case.



I am kinda wishing I had just bought another TRUE 120. But now I am saving for a Koolance liquid cooling system. I just want to beat 4.0 ghz, thats all. - V8 - Cooling - Computer Fans - Core I7'


Detail Products
Detail Reviews
Click here for more information


Fan Controller - computer fans, core i7 core i7 Fan Controller - computer fans, core i7

Thursday, 30 October 2008

Dewalt


I bought similar nails at the local big-box store before I knew that finish nailers weren't all designed at the same feed angle. Those nails didn't work in my DeWalt D51275K nailer, but these did. Would be useful if Amazon would specify the angle or the list of tools it will fit explicitly, as Senco does on the package. Senco A302000 15-Gauge by 2-Inch Bright Basic Finish Nail

I have been shooting these nails in my Porter Cable Bammer for a few years now and I haven't had any problems. Though I don't use my tools for a living, I am an avid woodworker and home renovator. As such I would say that in the past 5 years I have shot a thousand or so of these nails through my P-C Bammer gun and I can count the times it misfired on one hand. As long as the gun is set properly you should have no problems with jamming or with setting these nails below the surface of the wood.



With the good experience I have had, I can easily recommend these as a good buy!

IF THERE IS A PERFECT SIZE NAIL THIS IS IT.THE 2" ACCUSET NAIL IS JUST ABOUT PERFECT FOR ANY JOB YOU HAVE.I'VE USED IT TO NAIL HARDWOOD FLOORING DOWN,BASEMOLDING,DOOR MOULDING AND I CAN CAN GO ON AND ON.GOOD NAIL GOOD PRICE..'


Detail Products
Detail Reviews
Click here for more information


Dewalt Dewalt Dewalt

Dw735 Planer - benchtop planers, dewalt


I run a small cabinet shop, we had need of a secondary smaller planer...looked at, used, borrowed, several kinds before springing for this one (dint buy from amazon directly, this is a better deal with tables and knives ) We got about 200brd ft of knotty hickory on both sides, a hundy of knotty alder before blades began to show nicks, leaving small lines. When the knives are sharp, we get a better surface than on my $3500 powermatic 15" molder planer. Im initially very satisfied, just wish i could get better longer lasting blades...at $35bucks a pop you almost have to figure a set per job. Set up was easy, snipe is minimal, you CANT get it all out, atleast not on mine, and the rollers are not perfectly parallel with the table, one side does feed slightly better, but not adjustable as far as i can tell. Its better than any others ive tried in the under $1000 category, ymmv DeWalt 13" Two-Speed Planer Package

This is my second DeWalt DW735. First one was accidently damaged beyond repair after 6 years of use. This one included the infeed and outfeed shelves which are definitely a big asset. The screws to mount the shelves were already in place, just snapped them on, attached the handle and ready to go. Ran 12 inch wide by 4 foot long walnut through it, no snipe, finish smooth as glass. Great improvement over my first DW735 which didn't include the shelves.

I've used this planer to dimension oak that I milled from my property and so far it works great! Plenty of power and no snipe notiiced. I was currently using a benchtop Ryobi AP1301 Benchtop Planer and while this one also had plenty of power and was considerably less, it produced snipe at the ends of my boards which I had to cut off with my miter saw. To some reviewers this is probably not a big deal, but with all of the hard work and sweat going into my milling my wood, I don't want any waste. I've only used the dimensioning setting on the DeWalt since they recommend this for hardwoods. This unit from Tool King through Amazon.com was the best value I could find that included an extra pair of knives and the support tables. I believe it is a great value that I'll get many years of service.

The Dewalt DW735X Thickness Planer is the best on the market today.It works exactly as advertised. Simple to set up, and operate, with near perfect results every time, with any type of wood. I'm totally satisfied with this product. Keep up the good work!!! - Dewalt - Dw735 - Benchtop Planers - Thickness Planer'


Detail Products
Detail Reviews
Click here for more information


Dw735 Planer - benchtop planers, dewalt dw735 Dw735 Planer - benchtop planers, dewalt

120hz Refresh Rate - lcd, hdtv


First off, this review is based on the TV, price paid, and features it has, i.e. "value for the money". That said, this is a great TV with a good picture (but I have not done a side-by-side comparison with other HDTVs). Games play fine, not sure why others had problems...maybe they did not do the set-up correctly. TV does have a "Game" mode which is supposed to help any lag one might experience, and under advanced picture mode, you can set the "Smooth Motion Effect" to various levels. One of the main reasons I purchased this TV was that Vizio is one of the few manufacturers that list the power usage of their TVs without having to do a lot of searching, which was important to me. I have owned this TV for about a week.



Side note: Too bad one of the first reviews gave this TV a bad rating based on perceived lag which is not true. But first reviews always get the most votes because they are automatically put at the top, which is a catch twenty-two, because that tends to keep them at the top (people vote most for the first few reviews they see, thereby keeping them on top).



PROS:



Price

Great value

Easy setup

Light weight (this thing only weighs 67 pounds, but TV is about 5" thick)

Picture quality...very nice picture (but did not check out 1080P)

Energy Star 4...uses only 138 watts (THIS IS A BIG ONE, will save you a lot of money!) Edit 12/19/2010-see below.





CONS (minimal):



Sound is not the best, but still pretty good

No direct hookup to online media (i.e. Netflix, etc.) (but of course I knew this, I just use my DVD player)

Style is good, not great (but still much BETTER than the original Vizios)

Minimal connections, 3 HDMI, and only 1 composite & AV, really s/b two each

No side connections-(except for 1 HDMI & USB) worst con in my opinion

Poor onboard TV controls (without remote) ...but I guess this is normal nowadays





And this is not part of the overall rating, but the Amazon TV information (specs), purchase, checkout, truck delivery time (to inside house) and setup was top-notch, I knew when the TV would be delivered (2 hour time frame) at time of purchase! No problems!! I would definitely buy this TV again.



Edit: 12/19/2010

I tried the video games Quake 4, Serious Sam and Super Mario World, still cannot perceive a lag. I am no game expert, but I have not found any problem.



Also hooked up a "Kill A Watt" to check power usage, watts used when off = 0...Good! Watts used when on and using zoom (full screen) ranged from 160 to 200 with the average in between (mostly 170 to 180)...Not so Good! This is higher than I hoped but still good for such a large TV. But I wonder how they got the advertised 138 watts?



Edit: 1/23/2011

Per the site: [...] this TV is rated at 152 watts. The maximum wattage an energy star 4.1 TV of this size can use to qualify is 178 watts. VIZIO E550VL 55-inch Full HD 1080p 120Hz LCD HDTV

This is a good, low priced TV, no frills but a good basic big TV. The problems the other reviews talk about, with video lag and processing that takes away the film-look bothered me right away as well, and give the images a very weird effect. I thought maybe it was just me, or I wasn't used to a good quality picture, but whatever it was was not good. I really noticed it with fast motion sports, a football in the air was jittery and choppy. But there is a solution - on the second page of the TV Picture setting (select "more" at the bottom of the first Picture screen) there is a setting called Smooth Motion. Turn it off, and turn the Smooth Motion DEMO off. Problem solved, no more lag, jitters, and the film grain is back in the image.

We purchased this from a different retailer for 1399 around Jan 2010. It looks amazing in hi def with broadcasts like Glee, Marriage Ref, or regular DVDs.

Counter to the other reviews, The playstation looks awesome too, Full 1080P. I haven't noticed unplayable issues of lag, & I game online all the time. There was lag when I went through my receiver first via HDMI enough to notice in guitar hero or rock band, so I plug in directly ps3 to TV now for video because of that. I can't help but wonder if that kid knew how to hook up his game console. Hint: if it isn't with an HDMI cable, then you aren't seeing HiDef 1080 correctly. We've had nothing but jaw dropping fan reviews from our picture, people always want to come back and play/watch some more.

Vizios also have ability to turn off speakers and have more adjustments to audio, this is good, as I rarely use the TVs speakers. Had a friend tell me his new Sony wouldn't let him do that.



Cons: this TV can see through green screens... making fake shots look even more fake. I've tried to adjust it myself, but came back to default settings which looked better than mine. It brightens movies, losing that film effect, making movies look more like soap operas or camcorder shots. I suspect 'backlight' to be the cause of this, but again, I was never happy with my adjustments to make it better. another thing, when the screen is really bright, and I can see a fault in the 'plastic film' near part of the screen, a fold. I'd have to point it out to you it's so minor and you wouldn't see it 99 percent of the time, but it was a fault in my particular tv.



My panasonic Viera picture is slightly better & less bright, but I would make this purchase again over & over.(especially at the new price!)

I wasn't TV shopping when Amazon last had this TV on Cyber Monday for $899. When I started shopping, it was up to $988, which was still good, but I didn't pull the trigger. I ended up buying locally at CompUSA/Tiger Direct during a 2-day sale for $899. So even with tax, I was happy to be able to bring it home immediately and avoid the possibility of delivery issues other reviewers have mentioned.



About the picture: Right out the box, with the factory settings, the picture is crisp and very nice! Looked better than it did in the store! Set up was VERY easy. Take it out, set up to the cable box, pull off plastic, turn it on, watch TV. Took just a few minutes. Now that I've had it a few days, I've experimented with all the settings other have mentioned. There are enough picture options for standard viewing, movies, different sports, and games that everyone will find something useful. Picture will be a matter of taste, so use other reviewer's suggestions to narrow down on settings to your liking. I still have to swap out my current cable box for HDTV programming, so I can only imagine how good it will look if regular programming looks this good!



As far as limited inputs, that is true, but all I needed was a good looking big flat panel TV. I plan only to add a blu ray and Wii, so this TV more than fits my needs. I compared plasma, LCD, LED, and looked at TVs with internet applications. If you plan to add a lot of equipment and want all those internet applications, you may need to go with something with more HDMI input. I decided against plasma because I found dwindling availability. It seems LCD/LED is the way to go. I went LCD over LED for cost, and I prefer the less glossy picture that it offers over plasma. This TV replaced a big (but nice) 200lb HDTV rear projection, which costs me $2000 6 years ago and is worth just pennies today. At that time, plasma and DLP started at $4000. Very few DLP being sold, and similarly sized plasma can now be had for $700, so I'm glad I didn't spend $4000 back then! I didn't break the bank to go LCD, and saved quite a bit over a similarly sized LED.



It's big, it's nice looking, it has a crisp picture, and it's not a heavy monster. This TV will fit most people's needs. But whatever you decide, don't overbuy. Don't spend hundreds for features you will not use. Prices continue to come down as technology evolves. - Hdtv - Vizio - 120hz - Lcd'


Detail Products
Detail Reviews
Click here for more information


120hz Refresh Rate - lcd, hdtv hdtv 120hz Refresh Rate - lcd, hdtv

Night Treatments - roc, anti-aging


I'm 32, and the only telling thing about my age are the serious wrinkles on my brow. I decided to try this as it wasn't too expensive (look at Strivectin - ouch!) and thought even a small improvement would be worth the price. I have to say, I'm shocked. After about two weeks, I saw noticeable changes, and it's now been about 6 weeks, and the improvement has been tremendous. The wrinkles on my forehead are almost gone. I'll definitely be purchasing more.



Like some of the other reviews, there are areas this shouldn't go, like around the eyes. Be careful about that, as it created a little redness, not bad, but it really dried out my skin and caused flaking, which too about a week to clear up. Again, no problems anywhere else, but in sensitive areas like the eyes, it's potency was obvious, and these areas couldn't take it. RoC Retinol Correxion Deep Wrinkle Night Cream, 1-Ounce Tube

I must say that I was skeptical about this, but for the low price versus department store cosmetics, figured it was worth a try. Amazingly, it really works quite well and MY WIFE LOVES IT!



After a few weeks, people were commenting that she looked less tired, asked if she had lost weight, been exercising or on vacation. Since it works gradually over a few weeks, you notice a bit of difference yourself, but the people who don't see you that often really notice a dramatic change. Smaller wrinkles are smoothed out and disappear completely, while large ones get smaller.



It won't make a 69 year old look 20, but definitely takes off a decade of wear and tear.

Don't think about using this if you have very dry skin, as the retinol which eases those fine lines also causes skin to flake and peel, and Never use any product not especially designed for the orbital area around your eyes. I had undergone laser resurfacing about nine years ago on my face, but at the time my doctor said the forehead didn't need it. Now it doesn't have the same smooth feel as the rest of the skin on my face, so I decided to try the ROC Over-night Deep Wrinkle cream. Been using it for several weeks, and it has lessened the lines and made my skin feel smoother, but I've had to use some heavy-duty moisturizer during the day to counteract the drying effects of the product. I've now stopped using it and am using Kinerase, which smooths out those lines but also moisturizes as well. Don't expect it to work overnight, it has a cumulative effect, but at least while you're using it, it hydrates the skin better than anything I've found yet, and it was recommended to me by the surgeon who did the lasering on my face. As far as the ROC product, I would recommend it for short-term use only, and not for those with dry skin issues, as it will only aggravate them.

I am a 52 year old female (will be 53 next week) who, for the past year has been distressed about my undereye area. I have huge hazel eyes which have always been one of my best features- the change you undergo with aging is not that drastic - but you begin to look tired. I finally decided to try something, and I have to say - the fact that this product has been around for awhile (I personally don't know anyone who uses it) AND THE PRICE (because of course it won't make any difference) made me pick this one from Eckerds. I have been using it for 9 days and I swear it is working! My undereye area is actually improving! This is especially noticable when my face is fully made up - I wonder how they will look after a couple of months of continuous use. I have even decided to try the cream for my face, although I really am not concerned about it yet - I figure it can't hurt- this product actually seems to improve the quality of your skin. I notice in the reviews that one customer had a problem with dryness - I am the exact opposite - my skin has always been extremely oily and I am going through menopause as well- (night sweats and day sweats too) I have NEVER been able to wear ANY kind of moisturizer- it caused me to break out with pimples! I am even thinking of getting my 76 year old mom (a former beauty queen) both of these products to try! I would definately recommend the eye cream! This is the first time I have ever written a review for this website - I really believe in this product! The company's catch phrase "we keep our promises" is dead on the money as far as this reviewer is concerned!!!!!!

I've read the reviews, with people raving about this product, so I'm sure it works for most people. However, this is definitely one product you need to be careful with. Test it over a weekend because if you are allergic, you are going to need the time to recover from it. My mom bought it first and after a few weeks of use, she'd had the tingling and some redness that the product says are normal until your skin adjusts. She didn't think anything about the cream until one day when she realized she was having a severe reaction to it. Her face swelled up like a balloon, and you could barely see her eyes. She took Benedryl in large doses to stop the reaction, and it took her about a week to look normal. She did not get it near her eyes. Her pharmacist said they are seeing lots of people with reactions to skin creams lately, so perhaps there is a new chemical that products are using. Your reaction will depend on your individual tolerances, and there's no other way to know unless you try it.



Since my mom is allergic to many things, and I am generally not, she gave the cream to me to try. For two nights, I tried it on a small portion of skin on my chin, and I had no problems. On Friday night, I put it on my forehead, chin, and below the cheekbones, to test it on a larger area away from the eyes. Wow, was my reaction different! Saturday, my eyes were red and felt a bit warm, and they watered a lot. By that night, I didn't apply it again because my tongue and lips tingled, along with my hands, and I knew it was a reaction to the cream. By midnight Saturday, 28 hours since I'd first applied it in a larger area, I was also getting out the Benedryl to stop the burning feeling. I'm writing this about 6pm Sunday, and I still feel tingling in my face and hands and tongue, my face feels tender and warm, and the skin on my eyelids and under my eyes is bright red. Believe me, I didn't get it anywhere near my eyes and I washed my hands after applying it.



It is a shame some of us react this way, and there are some people who will say we didn't apply it right, or test it properly. I know that in my case, that isn't true. I'm not sure what is in it that would cause this kind of severe reaction, but it is up to you to try it for yourselves. I'm not criticizing the product with my rating, but by rating it low, people might read a warning that could help them. As I told my mom, when our faces were swollen up, they are right - we have no wrinkles! - Anti-aging - Night Cream - Roc - Night Treatments'


Detail Products
Detail Reviews
Click here for more information


Night Treatments - roc, anti-aging night cream Night Treatments - roc, anti-aging