Tuesday, 20 September 2011

Military Apparel - military, bdu pants


I ordered a pair of xs bdu pants for my son for Christmas. When they arrived I noticed they were too small. I called the number on the invoice and a very nice lady told me to return the pants and they would exchange them for a larger size. I did this and then never received the larger pants, its been nearly a month. They wont respond to my email. I am not sure what to do now other than write this review and hope I get someones attention. I dont have the original invoice so I dont have a phone # to call.



S. Poe 7941 ULTRA FORCETM BDU PANT WOODLAND (MEDIUM) - Military - Bdu Pants - Paratrooper - Camo'


Detail Products
Detail Reviews
Click here for more information


Military Apparel - military, bdu pants paratrooper Military Apparel - military, bdu pants

Upholstery Cleaner - bissell, little green


My husband, albiet not from here, picked up this little gem after calling him and relaying that our son dumped the entire contents of a chocolate syrup bottle on his bedroom carpet. Home he came with this bissell. Only one they had at the store.



Assembly in two seconds, I kid you not. Didn't even need to look at the instructions. put in the cleaning solution, filled reservoir with water, set it down, plugged it in. Now, mind you, it took me about ten minutes, with a few minutes between each go, this syrup was well and good in the carpet, but I am deeply impressed. Throughly impressed. It's very light, even filled, it's compact, fits real nicely into our cleaning closet, and super easy to use. For the price we paid, it's paid for itself halfway with just the one room, compared to getting our carpets steam cleaned every few months. I would happily buy again. Bissell Little Green Multi-Purpose Compact Earth-Friendly Deep Cleaner, 1400-7

Let's hope the Little Green is a precursor to greater models. I have owned a larger model Bissell for nearly 2 decades and am fully aware of its reputation for getting things clean. I decided I wanted a smaller, more portable model for my car, the stairs, furniture, and small stains due to people and pets. This way I would only have to lug out the larger model for the large jobs like the carpeting, which is truly a once in a blue moon event. With a little vigorous scrubbing and chemical solutions, virtually any stain is a thing of the past, however I have come to realize certain design characteristics could be better.



When I clean the stairs, I can't keep the unit more or less than two stairs away at all times. A step closer and it's too close to my cleaning area. A step down and the hose just won't allow me to reach. If only the hose could be a little longer it would help immensely. I also find the base of the unit hovers over the edge by a couple inches, which doesn't challenge its center of gravity, but a single unfortunate move could cause it to topple so it's good to pay attention to everything around you. Considering the shortness of the hose, it would've been nice if it could pivot or have free-range flexibility where it connects to the unit.



The sprayer doesn't just spray the immediate area being cleaned; it fans out by several inches to either side. When I try to clean a small area, the last thing I want is to have excess moisture to eventually remove. Let's face it all material retains some moisture even after vacuuming with "drying strokes." This increases the drying time and consumes more solution than needed which is wasteful.



The vessel for mixing the solution with water is clearly marked, however it's capacity is fairly small so after about 10 minutes of solid use, such as the stairs or furniture, I need to go mix some more. That in itself is not a problem so much as it's a bit of a drag to interrupt one's flow of progress to go mix more cleaning solution. I have yet to be challenged with emptying the collection vessel before my task is complete so I would say it is a fair size, yet I am astonished that the liquid I collect is far less proportionate to the liquid spent, i.e. for every tub of cleaning solution used, I only retrieve about a quarter, if that much. That means a lot of moisture is still soaked into what I've cleaned and The drying time is considerable (5-8 hours for a mattress), while less absorbent things such as the stairs only need and hour or two at best. One can cut down on how much cleaning solution is used by spending a little time pre-treating the designated area once or twice before cleaning.



Another design flaw that caught my attention is the lack of a handle. this may sound silly to some: it's a big tube, grab it anywhere. However I am 34 and have had arthritis for over a decade already. After about 10-15 minutes of use, my hands hurt because I can't get a proper grip. I've tried holding it various ways to no avail. I wish it was easier to grab. I am glad most of my cleaning tasks are done in that amount of time or I would be ready to call it quits.



On the whole, this unit is great. It is easy to use and easy to clean. It is also convenient to stow away almost anywhere. I feel the power cord is an appreciable length. I also feel most people would love it. Bissell makes reliable products that last and last, however I feel the folks at Bissell's research and development department could have spent a little more time developing the design of the Little Green. Whomever tested the prototype couldn't possibly have used it in a home environment, which is unfortunate because it leaves avid consumers, such as myself, to discover all the design flaws. After all, this unit is supposed to make life's little cleanup tasks considerably easier. Would I recommend it? Most likely, I would.

This machine is designed to guzzle bottles of Bissell Cleaner, but you can get around this!



Turn the machine OFF. Raise it above the spot you want to clean, either holding it or sitting it on a chair or higher step.



Lower the nozzle right over your spot, press the spray button, and gravity will drip the liquid as small as a dime to quarter size spot. Let it soak a few minutes, turn the machine back on and vacuum the liquid up.



Do saturate the spot well, then with the machine on press down without scrubbing too much and vacuum up as much of the liquid up as you can. Repeating, if necessary, will continue to lighten the stain. Vacuum it as dry as possible each time to pull out the stain.



There is also no reason you have to use the machine to hold and dispense your cleaning mix. You could use a bottle that squirts a narrow stream of liquid if you want to hit only small spots. After you've let it set a few minutes then use the machine to vacuum up the liquid.

I just invested in new carpet and needed a convenient compact cleaner. As the father of two active boys and the owner of two young (large) dogs & one fussy cat, I am concerned about muddy foot/paw prints, food spills and those much more critical "accidents" on the new carpet.



As expected, the cat struck first (and hopefully last) even before I removed the Little Green from the box! I'm pleased to say, the Little Green was well up to the challenge.



Easy unpack, low assembly, tank fill with water/solution, plug-in and clean-up. The whole job took less than 5 minutes. I was so pleased with the process from beginning to end. And best of all, my wife did not find the accident. the Little Green removed all evidence 100%! So, the cat is safe for now. The Little Green extended her 9 lives, keeping us all happy! - Little Green - Green 3 - Bissell - Pet Stains'


Detail Products
Detail Reviews
Click here for more information


Upholstery Cleaner - bissell, little green green 3 Upholstery Cleaner - bissell, little green

Dualshock 3 - dualshock 3, red


Well folks, now that the dust has settled from the Sony vs. Immersion lawsuit, Playstation 3 owners are finally able to feel the vibe again!



I purchased this controller today and I knew the only way to properly road-test it was on the game that made the Dualshock famous, Metal Gear Solid. After booting up the game, I walked down the hallway and got spotted by a guard. As he shouted, "WHO'S THAT?" the controller jumped in my hand - and I knew this was a smart purchase. As the guards shot at me, I felt the feedback of the bullets, just as I had 10 years ago on my Sony Playstation.



I picked out another old school Playstation game, Tenchu: Stealth Assassins. From Ayame's blades to Rikimaru's sword, each sword swipe and jump had excellent feedback.



Okay, so my Playstation games worked out. But what about my Playstation 2 library?



I popped in God of War, knowing I had to feel the swing of the Blades of Chaos. The controller vibrations felt a little lighter here, but the vibrations still occurred at the appropriate times.



Then I chose Incredible Hulk Ultimate Destruction. Who better to test a vibration controller than the Sultan of Smash? All the power jumps and smashes had the vibrations intact, but they still felt a little on the light side.



All right, so far I was two for two with my Playstation and Playstation 2 test subjects. But what about my Playstation 3 games? Could I possibly hit a trifecta?



I put in Uncharted: Drake's Fortune and I decided to jump right into a heated firefight. The controller gave me feedback while shooting weapons and getting hit by enemy fire, but I knew my purchase was justified when Drake was near death: I FELT THE DUALSHOCK 3 PULSING IN SYNCH WITH DRAKE'S HEARTBEAT. It's one thing to hear that noise and know he's near death, it's quite another to feel the pulse in my own hands.



Okay, so the feedback on the older games was there, but a little lighter than I remember. The reason? Well, when I decided to go wireless on my Playstation 2 system, I bought a Logitec Dualshock controller. It turns out, that controller takes two "AA" batteries, and the vibration motors inside the controller handles are slightly larger than the ones in the Dualshock 3. That's where I felt the difference.



The Dualshock 3 vibrations may be slightly less than the Logitec controller, but it doesn't require the purchase of batteries.

The Dualshock 3 may be slightly heavier than the SixAxis, but it doesn't take up any extra space at all.



Sure, the price is about $15 more than the SixAxis, but it's a worthy upgrade for the Playstation 3 gamer who kicks it old school as well as new school. The only other drawback is the lack of an additional USB cable - but we can use the one that came with the system itself.



So what's the final verdict?



Order it, plug it in, charge it up, and get ready for the inevitable downloads from the Playstation Store to make the older PS3 games Dualshock 3 compatible.



I wouldn't recommend a feedback peripheral without providing my own feedback...



Enjoy! DualShock 3 Wireless Controller - Red

I was already extremely happy with the Sixaxis controller, but I could not resist getting the DualShock 3. Not only do you get the rumble, but also, it feels much better in your hands, even for those games that do not use this feature. The rumble function is fun, but on top of that, it helps with gameplay, because "feeling" what is happening provides a lot more feedback than just watching how your character or car reacts to the environment.



The biggest surprise of all was that the rumble works with PS 2 games in the PS 3 system. I am currently playing through "God of War", a game which had the rumble capability in PS 2. I thought that it was unlikely that I was going to get this feature with this new controller in the PS 3, but it worked perfectly.



I know that having to buy a new controller and basically discard the one that came with the system is not the ideal situation, but I have to say this product is really worth shedding the extra bucks.

The Playstation 2's highly regarded DualShock 2 controller was considered by many to be the best videogame controller of all time. So when you've got a winning design there's no need to change anything. However, because of a legal battle with Immersion over rumble technology, Sony was forced to offer their Sixaxis controller without rumble. The Sixaxis had the same Dualshock design but it felt too lightweight and cheap. Thankfully the lawsuit has been settled and rumble has come back to the Playstation.



For the most part, the DualShock 3 is almost identical to its PS2 precessor. But it has all the features of the original Sixaxis controller in addition to rumble. The controller is still wireless, can be charged by plugging it into your PS3 (or PC), rumble is compatible with all PS1 and PS2 games, and the PS3 supports up to 7 controllers at the same time via bluetooth. Rumble in the DualShock 3 seems more responsive in regards to the location of its vibration depending on which side you get hit on during the games. I don't know if this is something in the design or if it's the developers doing it for the games but I welcome it.



All in all this is currently the best designed controller on the market right now. The PS2's DS2 was incredible so "if it ain't broke, don't fix it" applies here. I'll be enjoying rumble in my PS3 games from now on.

Do not buy the pink controller from Digistore, It is a fake, the joysticks are very stiff the buttons are taller and with dull ink, it also has a hard time syncing with console. Battery last 5 minutes tops. The sticker on the back is simply paper, not the plasticized decal on authentic sonys. Apearence-wise its a good fake, but use it and you'll know All the classic signs of a counterfeit. this isn't worth $5, much less $45 and two weeks of waiting. AVOID DIGISTORE, they are thieves who knowingly sell cheap knock offs. - Dualshock 3 - Red - Playstation 3 - Playstation 3 Controller'


Detail Products
Detail Reviews
Click here for more information


Dualshock 3 - dualshock 3, red playstation 3 controller Dualshock 3 - dualshock 3, red

Harddrive Upgrade Kit - sata usb adapter, sata


This is very cool. I frequently need access to hard drives that for whatever reason need to be removed from a computer. Usually, the computer has died and data needs to be retrieved from the hard drive.



This universal DriveWire allows nearly any hard drive to be plugged into a USB port.



Features:

- It's Small - it'll easily fit in a briefcase or toolbox.

- It has a power supply to power-up the hard drive.

- No software required - it's as easy to use as a flash drive or thumb drive. It comes with a CD but I didn't really need it.

- Flexible - can support almost any drive: 2.5" laptop drives, IDE drives or SATA drives. Apricorn Drivewire Universal HDD Adapter USB To 2.5IN & 3.5IN Sata & Pata

This little device is elegantly general in its possibilities. Indeed, it has more possibilities than those described in its manual.



The "EZ Gig II Backup & Disaster Recovery Software" that comes bundled with it is very powerful, and I say more about that in the next paragraph. Even without using that program, the hardware itself enables one to peer from any USB-equipped computer into the directories and files of a disk drive that is mounted on the adapter. Just as one can browse through file-containing directories (folders) on a USB flash drive, one can do the same with the contents of an intact disk drive attached to this adapter. When my daughter's laptop quit working for reasons unrelated to its disk drive, I removed the laptop's disk drive (a simple process requiring only a Size #0 Phillips screwdriver), connected the disk drive to the Apricorn DriveWire, plugged the DriveWire's USB cable into my desktop computer, and easily retrieved the document files that she needed.



Now to the "EZ Gig II Backup & Disaster Recovery Software." The happy ending to this story is that a potentially disastrous loss turned into no loss whatsoever and a painless disk-drive upgrade from 100GB to 160GB. Here's the problem I faced. Knowing that the shop which was going to perform an extended-warranty repair was likely to wipe the laptop's hard drive of its contents and reinstall Windows, I wanted to preserve all of the installed software and Windows customization to which my daughter was accustomed. To accomplish this, I needed to clone the laptop's disk drive and keep the clone when sending the laptop in for repair. If the laptop had still been working, this would have been easy to do with the EZ Gig II software: install the software on the laptop, attach a new drive to the Apricorn DriveWire, plug the DriveWire's USB cable into the laptop, and run the program. Unfortunately, I couldn't do that because the laptop was dead. Here's how I solved the problem. I bought two Apricorn DriveWires--one for me and one for my daughter. I installed my copy of the EZ Gig II software on my desktop computer. I mounted the laptop's original, 100GB disk drive on one DriveWire adapter, and I mounted a new, 160GB disk drive on the other DriveWire adapter. Plugging both USB cables into the desktop computer and running EZ Gig II, I was able to clone the contents of the 100GB original onto the 160GB replacement.



When the repair shop fixed the laptop, it did as I had feared: It wiped the laptop's hard drive of its contents and reinstalled Windows. No problem. My daughter replaced the Windows-only 100GB disk drive with the 160GB clone, and she was completely back in business. The only change was a 60GB increase in storage capacity!

In reading the review where the drives appeared to have been 'killed' by this product, I was thinking of how opposite my experiences have been with this product.



I have used the adapter and the 'EZ-Gig' software to upgrade my Dell laptop 2.5" drive. I have used the same arrangement for three 3.5" desktop drives. The Dell and one of the 3.5" drives is a SATA. The other two 3.5" drives were not.

In all of the above cases, the issue and goal was to increase the space available without performing a 'clean install' of Windows--and the requisite re-install of all of the programs/settings--etc.



In another case, I used the adapter to read a very old 10 gig drive and retrieve information.



As noted in the other review, the USB connection to the adapter and my PCs (the Dell laptop (E1705) and desktop (no 'brand' per se [PC800-E Deluxe montherboard] has worked very well indeed.





There was no trouble using the adapter and the accompanying 'EZ-Gig' software.

Though I dare not recount the steps taken for the upgraded(I should have documented them), the process for all of the upgrades was quite easy and saved a great deal of time.

I do agree that 'anything is possible'---I also, do agree that that type of answer is not conducive to good customer relations.



The five 'stars' are for the operation of the product only--Not an endorsement of the answer you got from Apricorn.



I hope that others will share their experiences with the product. That will give a better view of what is happening [good and bad] in the 'field.' - Sata - Sata Usb Adapter - Hard Drive Upgrade - Harddrive Upgrade Kit'


Detail Products
Detail Reviews
Click here for more information


Flat Panel Wall Mount


I was skeptical of this mount. Why should this be so cheap compared to other mounting kits? I ordered one (due to the price), and prepared to return it if I did not think the mount could handle the weight of the 52" LCD TV (Samsung).



Once I got it, I understood the cost. Good low-cost design and built with solid heavy duty steel.

- Two horizontal bars are load-bearing, and for proper VESA spacing, they have to be parallel and relative distance must be in the right tolerances. These are made of solid steel.

- Two vertical bars (in the wall mount) are flimsey, and that's ok. it should be solid enough make a rectangle box w/ square angles. That's it.

- Two vertical mounting (to the TV) brackets are of heavy duty metal. Making this in to two parts (not one), reduction of material, but also allows free horizontal adjustment on the TV mount.

- By doing the above, the kit is small, uses less metal (and reduce shipping and material waste).



Positives

---------

1. Good solid and heavy duty construction.



2. Good value (low-cost). Paid less than $ 25 including shipping.



3. Easy install. Took 15 min to figure out the instruction (which is not totally clear), and 10~15 min to install and ready to watch.



4. built-in level worked well during marking of mouting holes on the wall --I tested w/ my own, and was consistent.



5. Once the mounted on the wall, and bracket on TV, you could adjust horizontal TV placement on the mount, just by sliding few inches left or right, post install. I expect this to be safe and true if the wall mount is directly screwed into the wall studs. I do not expect dry-wall install without the use of the studs to handle such adjustment.



6. The brackets on TV could also be used to adjust vertical TV placement by a few inches up and down. But for this one, you'll need to lift TV off the bracket and adjust and pull back :-).



7. There is a reasonable space (I would say, just right) from the wall to the TV to get cables/connectors through WITHOUT using any expensive 90 degree connectors. Plenty of space between two horizontal bars to put extra power outlet and data HDMI cable outlet to hide all the cables.



8. This supports tilt up/down, and works well. Amazon product description does not make it clear.



Negatives

---------

1. Just one. Clearer instruction so that I do not need to spend 15 min figuring things out. One could learn a lot form IKEA :-).

2. Packing/Packaging -- Not necessarily Cheetah Mount issue -- mine came w/o missing parts, although I noticed torn cardboard box edges and some parts COULD have been lost during shipping. Either double box, or have Cheetah use heavier box stock.



Helpful Hints & Comments

-------------------------

1. DO NOT forget to tighten the screws (2) on the bottom horizontal bars AFTER TV is placed on the wall mount -- especially if you are in CA w/ quake. This is what prevents TV falling off the mount accidentally. But do not over-tighten (you are NOT securing from left-to-right movement).

2. Very happy w/ my purchase. Will get one more for my other TV. Cheetah Mounts APTMM2B Flat Screen TV Wall Mount Bracket, uses Universal Tilt Mount 32-55" - Plasma, LED, LCD TV Wall Mounts Mounting Brackets

The Cheetah mount is an incredible value. The mount is amazingly sturdy and very well built. It took me about 30 minutes to assemble the parts out of the box. Then another hour to mount the TV to the brick above our fireplace. I used 4 Quicktap blue masonry anchors to attach the mount to the wall, and it is so secure I could probably hang from the TV itself.



I was also pleased to find that the mount included all of the hardware (bolts, washers, spacers) that you would need to mount almost any VESA compatible flat panel. Our TV is a 52 inch Samsung (750 series) and the bolts I needed were included.



Overall, a great buy.

All I have to say is what a deal. I've always read consumer reviews for anything I've bought, but never felt compelled to write a review until now. This product is so cheap for what you get. Any complaints about the product itself lead me to question their expectations. I've learned a lot about consumer reviews by this product. People are whiners. This mount took me less than 1/2 hr to put up and it's rock solid. I saved $150 over a comparable mount at Best Buy! I'm pumped!

I took a chance, against my better judgment. I asked myself how can a $25 mount compare to a $300 mount? I have 2 girls and I would totally shoot myself if my 52" Sony Bravia (W series) ever fell on one of them. Well, I got this mount and I was already impressed. It is made of this extremely dense, slightly bumpy, but smooth to the touch metal. I mounted the first part to the wall and had my dad, who has owned his own construction company, to test it out. He approved by hanging his 180 lb body from it.



I did have to take a trip to Lowes because the screws to the TV were too long (20 thread). I bought 16 thread and added 2 lock washers, per screw, that already came with the mount. I also spent $30 on a good stud center finder because I wasn't going to mess around.



I feel very confident with this mount and I am very happy to have saved a bunch of money. If you buy this mount, just take your time, watch a few you tube videos about hanging a TV, and use common sense.'


Detail Products
Detail Reviews
Click here for more information


Gaming Laptop - razer naga, naga


** This review has been revised for the release of the 2.0 drivers, which enable full key remapping and macro support. THANK YOU RAZER! **

** Please consider this a 5/5 star review. For some reason, Amazon isn't allowing me to change that aspect of my review and I would like to keep the comments on this product review rolling. Sorry for any confusion this may cause. **





My first impressions review of the Razer Naga was pretty grim. Having come from using a Logitech G7 for years prior, the Naga felt clunky at best and the complete lack of any key rebinding support for a mouse intended for MMO use left me scratching my head. In the days following that initial review, Wave of team Naga left me a comment (as seen in the comments section of this review) stating that they were intending to address the later with an upcoming driver release. A few months later, just as he had promised, version 2.0 hit... and it hit hard!



Before I get into all that, let me tackle the ergonomics. As I mentioned, at first I felt this mouse to be very clunky. Now, months later, I could not have been more wrong. When they said this mouse was designed for long gaming sessions with minimal hand fatigue, they meant it. My only real complaints in this department is about button placement. No, no, not the 12-button thumb pad... those are perfect! My beef is with the two additional index finger buttons, which for me, are at best awkwardly placed and at worst completely unusable.



But lets cut the nonsense, if you are reading this you care about one thing and one thing only... the 12 buttons on the side of this bad-boy.

I'll be straight with you, at first it is awkward as hell and comes with a bit of a learning curve. Don't expect to pick this mouse up and be some kinda of button-pressing Mozart by morning. Now months after my purchase I am still second guessing myself from time to time when reaching for the 8 and 9 key, mostly because I don't use them in very many games. As I alluded to earlier in this review, they are placed such that I don't have any issue at all reaching any one button (though 11 and 12 require a funky move that can mess with my cursor precision.)



The 2.0 driver also brought with it two additional features that came as a bit of a surprise to me... profiles and macros! The profiles are just what you would expect and though very basic in their functionality, the macros should get the job done nine times out of ten. If you are familiar with the Logitech G15 or Nostromo N52, then you know what I am talking about. If not, well, it's little more than pre-recorded keystrokes with custom delays between them. Nothing fancy, but far from useless.



Now that the issue of rebindable keys has been taken care of, I struggle to find anything at all wrong with this mouse.

If I absolutely had to give it a con, hmmm... I suppose it requires a bit more care than other mice in order to keep clean. Lots of buttons means lots of places for build up. Fortunately the fit/finish on this mouse is tight enough that cleanup is a breeze.



Happy grinding/fragging/whateveryouneed17gloriousbuttonsfordoing! Razer Naga Epic Gaming Mouse

Edit: I've stopped playing WoW so much and have been playing other types of games recently. Now that the buttons can be remapped this mouse works well for any game. It's great for shooters because I can swap weapons without having to reach for the F-keys. I've grown to appreciate how ergonomic it is. It fits my hand perfectly. I'm fully acclimated to the button placement and can hit the right one without thinking. Razer was right that it takes 15-20 hours for it to become second nature. I have found that for my short fingers only 9 of the 12 thumb buttons are an easy reach. I try to put the less important functions on the top row.





As an avid WoW player I'm always on a quest for mice with more buttons. MOAR! Most mice are limited to 5 mappable buttons that my fingers can actually reach. Some do cram more buttons on the mouse but place them in awkward locations that are only practical for infrequently used functions. I had high hopes for the SteelSeries WoW branded mouse but it's built poorly and the thumb buttons are hard to press individually without fat fingering the next button. Another mouse I wanted to like was the Sandio 3D but it's way too large for my hand. Plus, the hat switches are good for movement but not so good for mapping to four individual functions. I've been using Logitech MX series mice that have 8-9 mappable buttons. These are comfortable and the software is very flexible in how the buttons are mapped. I've been content with them but am always looking for more.



Enter the Razer Naga. I thought this was a Photoshop joke when I first saw the picture. But they really have put a cell phone style keypad on the thumb side for a total of 17 buttons. What's amazing is they've done this while keeping the mouse a reasonable size and having all but one button within easy finger reach. The mouse feels very high quality. It's very comfortable with good tactile feel. The scroll wheel is the nicest I've ever used. It's clear that Razer puts a lot of effort into creating a functional design, not just something that looks good in the box. My only complaint about the physical aspect is that it's rather lightweight.



The thumb buttons will take getting used to and I'm still working on it. I'm not going to raid with it out of the box because I don't want people to die. But even after a short while playing around with it in battlegrounds I'm improving and I can tell that the muscle memory will build up quickly until it feels natural - just like with a keyboard or gaming pad. Thoughtfully, Razer includes rubbery stick on nubs that you can place as tactile landmarks to train yourself. Razer claims 88% of gamers are fully comfortable after 18 hours of play.



The Windows driver is simpler and less flexible than I expected. The thumb buttons map to either the number row above the keyboard or the right number pad. The 5 main buttons map to the standard windows Left/Right/Middle/Back/Forward actions. There is no custom button mapping. Razer expects you to use an in game interface to map your actions to the fixed buttons. This is fine for WoW but could be a limitation on other games.



Razer supplies a custom WoW addon that is available at [...]. It's just a branded version of Dominos - an established addon. It's good that Razer licensed something that is fully featured and well tested rather than creating something new that probably wouldn't be as good. I'm unable to use it, however, because it conflicts with Bartender4. There is no need to use the Razer addon as the mouse is just acting like 12 keyboard buttons. Since the default behavior is to just map the 12 numbers above the keyboard you could just use standard WoW action bars and keybindings with zero configuration.



If it's not clear by now, I think this is a great product. I've been waiting for a mouse like this for 5 years and Razer has delivered! - Naga - Razer - Razer Naga - Wow'


Detail Products
Detail Reviews
Click here for more information


Perfect Small Business Printer


This printer has proven to be exactly what our office was looking for -- simple to setup and use.... not a thing complicated about it. Have run nearly 1000 copies, scanned & fax'd a few hundred documents through it without a problem. Basically -- it was an excellent multifunctional laser printer for the money (paid about $219 including S&H from J&R Electronics Inc.). Canon ImageCLASS MF4570dn Laser Multifunction Printer (4509B020AA)

We got this machine to replaced our Canon MF5770 that we had for about 4 years, and finally sucame to the dreaded "download standby" error. We use all functions of the machine, both this one and the MF5570 which it replaced.



We are a small medical research clinic, and the machines usually gets about 50 pages on average sent to them either from a print job or a fax. Many days it will be quite a bit more. We also fax jobs out a few times a day. The new machine is a definite upgrades in many ways, and a downgrade in one critical way (though how critical will very per person).



So what's great about this machine?

- Duplexing: Works great and is speedy. It also duplexes faxes and print jobs.

- Networking: Once set up correctly you can print to this printer from anywhere, and scan from the computer or from the machine to a computer on your network.

- Speed: Print jobs are fast.

- Paper tray: Holds plenty of paper and the translucent cover lets you see when you are running low.

- Size: Its about half the size of the printer it replaced, and yet its still faster, and does more.

- Scanning: The included software is a breeze to use, and the ability to initiate scanning from the machine or the computer is ideal. Before only the one computer attached to the machine could scan, but now all the computers in the clinic can scan. This is a huge time saver for us.

- Energy Saver Mode: Works great, and wakes up super fast from this mode so no waiting to print or fax or copy but you still save energy.



So whats not so great about this machine?

- Text quality: The text printed from the machine is just a bit not right. I mean, most people will not notice is, but the MF5770 had superb text rendering, and this machine just doesn't. Its completely passable, and like I mentioned most people would not even notice. Its too sharp, and not smooth, is the real way to describe it. Some people might even prefer the extra sharpness, but I sure didn't, and neither did the PCMag editors.

- Buttons: The buttons are like tictacs in shape and sort of hollow, and are not great on the fingers, and sort of small. The layout is also a little weird. The menu okay button is a big round circle and I keep hitting it instead of the button i actually mean to hit, the green ok button for initiating an actual activity.

- Noise: Its very quiet when not in use, but maybe a tad too loud when in use. However its fast so its not noisy for very long.



Some other things. I've seen it asked many places to let me just clear it up here. This machine will provide a confirmation page for faxes and include an image of the fax facesheet. It is not located under the fax settings but under the reports setting. You just need to go to reports-->fax tx-->print report with image after each transmission-->yes/on. If you set the machines up correctly, you can have it so that the machines scans a file and attaches it right to an email with the push of one button. Love this feature as we often have to email scanned documents.



This machine got the editor's choice award from PC mag, and rightly so. For the price you get an incredibly versatile, speedy, machine that doesn't take up much space and can handle the work load of a small office with ease. You just can't beat that.

Since a month time I'm using my Canon MFP [[Canon ImageCLASS MF4350d Laser All-in-One Printer)]] - so far so good. It prints out very well + fast, copy is also good + fast and the network setup was thanks to my Apple Airport express not too complicated. The device is handsome made, no cheap plastics + comfortably quiet while working. -- But I'm really upset about the scanning function what does not work at all with my network. No one told me before that it's totally impossible with MAC OS! What the hack mean all the MAC OS-logos on Amazons product details as well as on any Canon details like packaging, manuals etc?? Are you kidding me? I had to check it out after I bought it and spent a hell of time getting an answer via internet because there was no help from Canon service nor you find even a short notice in that totally messed up think-but-useless manual you can print out again on a PC only! Very disappointing! (please excuse my poor English: it is like my Canon MFP not perfect ...)

Took delivery several days ago and couldn't be happier. The machine is fast quiet and the functionality is everything I could ask for (although I haven't used the fax yet). Wired Ethernet configuration was straightforward (I chose static IP). I avoided the enclosed software CD thinking it might contain bloatware, and downloaded directly from Canon website. Everything installed smoothly on Win7/64 system. The built-in print options are terrific. I was able to print a 140 page manual, 2 pages/sheet duplex using only 35 sheets of paper. I can initiate scanning either from my computer or at the printer.'


Detail Products
Detail Reviews
Click here for more information