In all likelihood the first reaction of someone considering the purchase of the DW735 Planer is going to be that the stand is simply too expensive. And it is dear. I didn't buy this table at first, but used a standing table I had in the shop. The only problem was that moving the planer about in a small shop rapidly becomes a weightlifting exercise. The DW7350 is the heaviest of the portable planers. To solve this DeWalt as brought out this heavy-duty, rigid table that moves easily on its casters. Once you break down and decide to purchase it you are going to wonder why you didn't have it right from the start. Mine came with a midway shelf, which doesn't appear in the picture. Working height is excellent. Assembly is pretty straightforward as well. DEWALT DW7350 Planer Stand with Integrated Mobile Base
I received this mobile planer stand for Christmas and I am very pleased with it. The packaging was adequate and the assembly instructions were basic and easy to follow. Working alone I had this stand assembled in about 45 minutes. I was amazed that all of the pre-drilled holes were precisely where they needed to be. None were off even a little bit! Although the picture here on Amazon shows this planer stand without the (included) lower shelf installed, I went ahead and installed mine. I think this is a great feature to include with this product as it adds an extra storage spot and it also adds rigidity to the stand (although it felt very sturdy anyway). For now I have put my Delta planer on the stand and am pleased with the utility of this product. The only thing I can think of that could be improved a bit, and this is minor, is the particle-board top of the stand. I felt it was a bit undersized and also a bit too thin. If I were redesigning this tool I would have made the top twice as thick to add strength as well as weight to cut down on vibration. As I said though, this is a very minor criticism. Overall I highly recommend this mobile stand as a quality product and a good value for the money!
This is a rugged, sturdy table for benchtop type of planer. You wouldn't wnat to run 12" 8/4 board through it without using a roller stand on both sides lest you risk tipping the planer stand over. But otherwise, it's a very useful item.
If you asemble one, follow the descriptive text for assembly, noting the letters used to denote each part (washer "P" or "O", etc. IF you do that, asembly shouldn't be difficult.
I found the that the bolts for attaching the planer to the stand were bagged separately from the other nuts and bolts so there was little chance of using the wrong bolts.
I used a 1/2" wrench and a 1/2" socket without any problems. You do need a socket for tightening some of the nuts.
Assemble in a clean area; if you drop a nut or washer, you want ot be able to find it as there are just enough of each parts, including nuts, bolts and washers to put the stand together. Don't count on there being spares if you drop one into the pile of waste cuts you haven't gotten around to picking up.
I find that the top panel is more than sufficient for it's purpose. Some have said that it could be thicker, but the weight of the planer rests near the perimeter so you shouldn't expect to notice any flexing in use. Also, near the perimeter, the panel rests on front, back, and side bars, which at the top extend several inches toward the interior.
A plus, the panel is predrilled and marked for the DeWalt planers, although you can countersink and drill holes to hold other benchtop planers.
The stand is rigid and uses lockwashers on all of the nuts where lockwashers would matter. I expect to get a long useful life from this stand, and I know my back is going to appreciate it. ;-)
I would give a 5 star rating except for two problems in the assembly instructions. First I do not recommend mounting the foot pedal inside the frame. You cannot get to it with your foot. Secondly the longest bolts do NOT mount the wheels. Instead use the next shorter ones provided. The longest bolts are what work to mount the planer to the stand.
One last item, I also purchased the extention plates. It would have been nice to know in the stand assembly instructions the planer cannot be mounted to the stand BEFORE you install the extentions.
The above mis-information added about two extra frustrated hours to assembly.
This is a very substantial stand for the 735 planer. The package comes complete with all of the nuts, bolts, washers, and screws needed for proper assembly. The overall workmanship is excellent (no unfinished or rough edges or corners - a typical fine DeWalt product).
The negative aspects of this stand involve the lack of coherent directions for assembly. All of the nuts and bolts are metric (no mention of this in the assembly instructions), the assembly of the footstand for elevating the entire planer stand is left to the imagination of the assembler, the placement of the feet is vague, and the length of the shoulder and carriage bolts in the various applications is left to trial and error.
Making the assembly instructions more user-friendly would greatly enhance the rating level of this product.
A good solid stand for a planer. However, the assembly instructions suck.
1. Nuts and bolts are really 13 mm, not 1/2".
2. Very poor illustration.
3. The foot pedal is a hazard mounted 'outboard'. It is much better mounted 'inboard' and actually functions better in that position. To make the foot petal easily usable 'inboard' you must reverse the actual foot petal on the pre-assembled unit. Remove the retaining clip (split ring pliers do not work, use a screwdriver) and just reverse (180 degrees) the petal.
All parts will be used with none left over, so read the instructions carefully. - Dw735 - Planer Stands - Dw7350 - Dewalt'
Detail Products
Detail Reviews
Click here for more information
