This set of 20 bits costs less than one high-quality diamond bit from other sources, and the bits did the job for which they were purchased.
Used them to drill two 1/8 inch diameter holes in non-tempered window glass. This must be done slowly to avoid overheating and possibly fracturing the glass. Used several different bits to change shapes in the hope of making it go faster. When done, the holes were fine and all of the bits still seemed to have their abrasive surfaces.
I've read elsewhere that a high-quality diamond bit will last for perhaps three holes like these, and that it takes about two minutes to make one hole. Well, it took about 30 minutes per hole, but more than half of that time was spent pausing to let the glass and bit cool off. Since all of the bits still have diamond grit on them, it seems likely that they'll be able to make several more holes before wearing out.
NOTE: Tempered glass probably will shatter if drilled. This window didn't have a "tempered" logo in the corner and looked normal when viewed through polarized sunglasses. Pro-Quality 20-Piece Diamond-Point Bit Set for Rotary Tool - Glass, Stone, Ceramic
These generic diamond point bits work great on my dremel rotary tool and the price for 20 of them is cheaper than buying 1 bit of the dremel brand. I use them for engraving on glass and they have been great.
One of these diamond tipped bits will run you between $8.00 - $10.00 at any retail or hardware store. This set has every bit for any project you could think of and the power to handle almost any material. It is definately worth the money. Works great on glass, metal, and stone.
I am very very satisfied.
The drill bits worked fine on soft materials such as seashells as long as I didn't put too much pressure on the bit. But on harder materials such as ceramic or stone, the diamond coating wore off very quickly, rendering the bit useless. And yes, I did use lubricant.
These bits were purchased primarily for drilling sea glass for jewelry making. Since this was my first attempt at such a project, I didn't want to spend a lot of money experimenting.
I'm still trying these out, but so far, so good. I like having the variety to play with. I am using these with a Dremel and they work great. I have no complaints. - Bob Tool - Jewelry Making - Dremel - Rotary Tool Accessories'
Detail Products
Detail Reviews
Click here for more information
