As are most men these days I'm into my power tools. This saw may just change your mind for many projects. I have used one for a while now and it lives up to its claims. It will trim flush without marring the surface around what you are cutting. It cuts fast and straight. I've been using mine to cut dovetails and I actually like it better than my router! With the Leigh dovetail jig (about $400) I have a problem with tear-out. Using this saw, I can cut perfect dovetails, tennons and trim very small amounts with ease. It is faster and easier than setting up the expensive jigs. Of course it takes some practice, but once you try one of these saws you may never use a power saw for small cuts again. Shark 10-2204 Dowel/Dovetail/Detail Saw
I have a number of moderately priced Japanese handsaws that I find are absolutely invaluable in traditional Western woodworking. The thin kerfs and double-cut teeth cut through wood amazingly fast, and the technique- cutting on the pull stroke- makes it exceptionally easy to follow a pencil line. This flexible cutoff saw has recently earned a place in my tool bag. The traditional double-cut design means you can cut on either side of the blade without scratching adjacent surfaces, unlike Western saws, which have teeth set to one side and can only be used on one side.Not only will this saw cut protruding dowels about as quickly as it takes to think about it, it does it better than any power tool you can imagine. What kind of power tool could you used to trim a dowel in the middle of an oak floor, after all? With a price less than a package of blades for a Sawzall, it's a bargain.
I picked up this saw at a local hadware store on a spur of the moment thing. A project was held up because I didn't have a flush trim saw. I was putting off getting one, but when I caught sight of this saw on the rack while browsing I decided to buy this Shark saw not knowing how well it would work. I have Japanese ryoba and dozuki saws and really like how they cut on the pull stroke. No binding! Well this Shark saw works great too. The teeth on this saw have no set so it allows you to use it on either side and with either hand. There are some flush trim saws that have teeth set to one side and the disadvantage is that you can only use it right-handed and only on one side. Also, some western style trim saws don't cut totally flush and you have to use a chisel plane or sand them flush. With the Shark you can trim dowels totally flush. The thing to remember when using Japanese saws is to let the saw do the work and that they cut on the PULL stroke. The other nice thing about this Shark saw is that the inexpensive blade is replaceable.
The teeth on this product are for cross-cutting. For making dovetail cuts, you need to have teeth for ripping, since you're cutting parallel to the grain. And the teeth are not aggressive enough for letting the saw do the work. I am cutting on the pull stroke and letting the blade do the work, but it does take a very long time to produce a cut. However, the kerf is nice and thin.
For cutting dovetails, I recommend a pull-saw with a more aggressive blade and with rip-teeth... one of the double-edged pull-saw, one edge for ripping, and the other edge for cross-cutting. I bought a double edged Bear Saw from Lowes, and it's much more effective, and produces a straighter cut.
It's fine for smaller applications like cutting dowels, because the teeth are made for cross-cutting, and perhaps cutting small architectural models, but for dovetailing, you need a more aggressive pull-saw with rip-pattern teeth.
I initially bought this saw because it's advertised as being able to cut dowels or plugs flush with a surrounding surface. I tried this a few times, and was fairly disappointed - it cut easily enough, but scratched the surrounding surface badly! After more research, I learned that a true flush-cut saw does not have any "set" on the teeth (i.e. the teeth aren't bent out from the saw plate. Some set is important to prevent the saw plate from binding in deeper cuts, but it means that the teeth will scratch the surrounding surface if it's used as a flush cut saw).
I eventually bought a true flush cut saw from a popular Canadian woodworking/gardening retailer, and was amazed at how much difference that made. The teeth are truly flush with the saw plate, which means they won't scratch your workpiece when you flush cut a dowel or plug.
Not so on this Shark saw - the teeth do have set and will scratch your workpiece if used for flush cutting. Some significant time spent with a sharpening stone could theoretically remove this set, but the impulse-hardened teeth would make this more difficult, and it would be hard (for me at least) to justify that time and trouble when ready-to-use flush cut saws are available for only a few dollars more.
Second, this saw is advertised as "Ideal for dovetails..." While it may be strictly FUNCTIONAL for dovetails, it's far from ideal. The vast majority of saw cuts made when creating a dovetail are effectively rip cuts, which means you're cutting along or parallel to the grain of the wood. This type of cut is fastest and most efficient when done using a saw with rip style teeth. This Shark saw has teeth shaped for CROSSCUTS (perpendicular to the wood grain), so it's optimized for slicing through wood fibers in this orientation. It will still make rip cuts, but these cuts will be slower and potentially harder to control than they would be with a rip-specific saw. In other words, you could use this saw for an occasional dovetail, but again, it's definitely not "ideal".
The third descriptor in Amazon's title is "detail" saw. Finally an accurate description of an appropriate use for this saw! It does a fine job with small crosscuts and general trimming tasks, and leaves a fairly smooth surface. Nicer saws are available for these general small crosscutting tasks, but this is about as good as it gets for the price.
In summary: If this had been called a "Detail/fine crosscut saw", I would have given it a much higher rating. However, it's NOT a flush cutting or dovetail saw, and shouldn't be advertised as such. If you're looking for good saws for these specific tasks, look elsewhere. - Handsaw - Handsaws - Saw - Pull Saw'
Detail Products
Detail Reviews
Click here for more information
