Sunday, 8 August 2010

Compact Violin Case - case, violin smart case


Caveat emptor.



Desiring more rugged protection for my primary violin, I purchased this sturdy case.



There were several critical issues with this case.

1. This case was too narrow to accommodate either of my two (dimensionally typical) 4/4 "real" violins or my (somewhat slim) electric violin.

2. The bottom bow holder wasn't deep enough for a full sized bow (manufacturing defect?)

3. The "lining" of the case, while soft, was a shaggy substance, certain to capture rosin and eventually damage the violin's oil/varnish.

4. The top bow holder, while deep enough, exerted _sideways_ pressure on the bow (which will ruin a wood bow). Gator Cases Deluxe ABS Full-Size Violin Case for 4/4-Size Violin - Case - Lightweight - Case Violin Light Weight - Violin Smart Case'


Detail Products
Detail Reviews
Click here for more information


Compact Violin Case - case, violin smart case case Compact Violin Case - case, violin smart case

Cordless Nailer - cordless nailer, nail gun


This latest offering from Paslode is the next iteration of their venerable cordless framing nailer (IMCT). The unit has addressed some issues that existed with the original design and has added some new features. Some people found the firing rate of the previous design to be a little slow so this new nailer does fire faster. The nose of this nailer actuates in more positions and with less pressure than the older model making the nailing process a little easier when toe-nailing in tight areas. The fuel cell has been redesigned so that it is a simple drop in as some people apparently had issues with the fuel cell not mating properly with the metering valve; I never experienced this myself. This unit holds more nails per load and the rafter hook has been redesigned so that it can actually be hung on a rafter as the older style was to narrow. Finally they redesigned the combustion chamber with the intent of increasing the time that the nailer will operate reliably before needing to be cleaned. I have no reason to doubt this but it is too early for me to tell if it has been achieved.

All in all the unit itself is a nice redesign that fits well in the hand and addresses a few deficiencies with the earlier design. However this offering does bring a whole new and in my opinion a show stopping issue to the table. Paslode management has decided to package the fuel cells for this product with the nails. This mean that they must be purchased together so if the cell runs out, is defective or you lose a fuel cell you have to get more nails. This also does not bode well for those who have stocked up on nails. The fact that the redesigned fuel cells are not compatible with the older units is a problem in itself and forcing customers to buy nails with the cells just adds insult to injury. Paslode claims that this will ensure that the customer has enough fuel for the lot of nails but i think there is an ulterior motive lurking.

In my opinion Paslode is showing very little commitment to the customer by selling fuel cells only with nails... I think their true reasoning for this may be to ensure that you buy Paslode nails. In addition, in terms of space there seemed no practical reason to change the fuel cell design other than to ensure that it was not compatible with older guns. The "drop-in" installation could of been achieved by redesigning the nozzle and slot retaining backwards compatibility. I am sure that someone at Paslode is planning on sun-lighting the older red fuel cells forcing owners of the older Framing nailer (IMCT) to upgrade. Sorry Paslode this is not the sign of a top company that supports its loyal customers... I hope that the management at Paslode see fit to offer the new cells both separately and for a reasonable price. I also hope that they find a way to ensure that older framing nailer's will continue to have fuel available. Homeowners who may not use the guns very frequently expect that their purchase(Expen$ive) of a commercial quality tool would function for a very long time, let's not let them down. Paslode CF325 902200 Cordless Framing Nailer

the gun works like a charm! toe nailing is greatly improved with this gun because of the new tip that you can change depth with your hands. I used this gun all day for framing a big deck, went through half a box of ACQ 3 1/4" nails and every time I pulled the trigger the nail drove home, not one miss fire. when gun gets hot it still keeps working perfectly (new stainless O rings) the fuel cell is easier to load and unload. Much improved over the previous 900420 cordless Paslode framer. The only reason why this gun gets a 4 star is because you can't buy the fuel cells without buying a box of 1000 Paslode nails. New orange fuel cell is different than the red fuel cells and you can't switch the cap of the fuel cell. they say that you should be able to drive over a 1000 nails with one fuel cell, well from what I've experienced with the 900420, if you don't have the perfect weather conditions (like 15 degrees) your fuel cells don't last that long and you need to keep an extra cell warm in your pocket, so while the one in your gun is getting too cold to work, you can switch with the warm one in your pocket. If they start selling fuel cells separately I will change the 4 star rating to 5.

I recently purchased Palsode's new and improved CF-325 cordless framing nailer when my 10 year old Impulse bit the dust. I like the rubberized hand grip which helps in keeping the gun under control as my hands are dripping with sweat, which is almost all the time down here in southern most Key West, Florida. (hot, hot, hot). I can toe nail like a dream with this gun. The gun hanger has a cool improvement, as it will hang off my tool belt or when switched around can hang on joists. Very handy. The new fuel cell set up keeps the fuel cell firmly in place so that it does not dislodge while firing, like in the older gun. The door for the fuel cell compartment is much beefier with metal parts, rather than just plastic. The depth setting is a breeze as you can do so by hand rather than having to break out the tools. I have gone through 4500 nails with no problems. I was very frustrated trying to find replacement fuel cells. None of the lumber yards in the Keys had heard of this new gun, let alone sell fuel cells. My only complaint is a ditto on the previous reviewer in that Paslode is not selling fuel cells by themselves. You have to buy nails and fuels cells toghter in a combo pack. I had plenty of nails from Home Depot and did not want pay the shipping fee for more nails just to get fuel cells. I hear that Home Depot is going to be selling the combo packs and the new gun in about 1 month. Fortunately, I was able to buy separate fuel cells on ebay and get back to nailing.

I am a DIY person who enjoys framing. I purchased the CF325 last week for a job building a stage in our church where I could not use a compressor. Opened the box, read the directions, inserted the fuel cell, loaded a rack of the largest diameter (.131") X 3-1/4" long Paslode nails and in less than 5 minutes, from opening the box, I was nailing 2 x 6 framing members together and a 3/4" OSB floor on top. On the second lowest setting for nail depth, it drove them perfectly, just slightly below the surface. No need to readjust going from 2 x 6 framing to nailing down the 3/4" OSB subfloor. You can justify the small cost of the fuel cell against the time to position an air compressor, it's operating and maintenance costs, and the hassle of the air hose. This tool is amazing. I could not believe how fast the whole job went. Outside in the winter, keep a second fuel cell inside your jacket where it can stay warm. As they lose pressure from the cold air, just rotate them back and forth. Takes only seconds. This tool, if it holds up as well as others seem to indicate, can revolutionize framing. - Cordless Nailer - Nail Gun - Nailers'


Detail Products
Detail Reviews
Click here for more information


Cordless Nailer - cordless nailer, nail gun nailers Cordless Nailer - cordless nailer, nail gun

Child Development - kids, stranger safety


This video is pretty good at describing how to take care of your body. I own almost all of the Trevor Romain videos and this one is my least favorite. I plan on showing it to my 3rd graders anyway and hope they find it entertaining and educational. Trevor Romain: If You Don't Take Care of Your Body, Where Else Are You Going to Live? - Safety - Parenting - Kids - Stranger Safety'


Detail Products
Detail Reviews
Click here for more information


Child Development - kids, stranger safety kids Child Development - kids, stranger safety

Exercise Mat


I sent this mat to my daughter for Core and Floorbarre classes while training in ballet. She loved both the pretty pink color and the fact that it had a bag to carry it in since she rides the Sub daily. Great product, Thank you! Gaiam Printed Yoga Mat and Mat Bag Set - Dragonfly Pink

This is pretty, but that is all it is. It is less comfortable than the yoga mat I bought at Walmart for 1/3 of the price! It is not comfortable, made cheaply and very thin. It is pretty much useless. It is also very slippery so you cannot hold the poses without shifting and rearranging your hands/feet. I will never buy any Gaiam products again.'


Detail Products
Detail Reviews
Click here for more information


Exercise Mat Exercise Mat Exercise Mat

Impact Driver


I've been using this kit heavily to finish a basement room. I did some shopping around originally to upgrade my old 9.6 V cordless. I had narrowed it down the Dewalt DC720KA, the Milwaukee 18v compact, or the BDF142 when I came upon this kit. I never used an impact driver before this, but I discovered all the pros now do their screw driving with these. I'm glad I decided to give it a try!



Impact Driver: I will never drive wood screws with a drill again! Significantly less pressure is required to keep the phillips bit in contact with the screw head. I've driven 3" wood screws all week and not a single stripped head. It can install a fastener in tight places where a drill or hammer/nail just can't go. Superior torque will bury the screw (head and all) as deep in the wood as you want to go. I will use this more than any other tool in the kit. It is a little beast!



Drill: Good combination of power and speed. Enough to push a 1 1/4" self feeding bit through 3 1/2" of pressure treated lumber the high torgue setting. 5/8" self feeding bits eat through studs in a flash on the high speed setting. It is light like a cordless tool should be, and has the best power/weight ratio of any cordless by far. It comes with a quality chuck and plenty of torque. I think the drill is slightly better than the compact 18v Milwaukee and just a shade behind the Dewalt DC720KA which are both fine products.



Light: Has four convenient head angle adjustments from 0 degrees to about 110 degrees and a strap for hanging. Not a primary reason to buy this kit, but it's come in really handy for me.



Kit positives: Nice compact case has room for drill bits and accessories. Batteries do charge in 15 minutes. These tools have serious power. The combo of the drill and impact driver is unbeatable at this price. You would spend twice this to get the equivalent from another manufacturer. All three of the tools are a pleasure to use. The led light on the drill and impact driver does come in handy when you are working in dark corners.



Kit negatives: Run time might not be enough for heavy duty users. Not a problem for me; quick charge time makes up for it. I can use the impact drive all day on two full battery charges. Most of the black on these tools is rubber except for the raised Makita logo, which is paint. I've jammed the impact driver into some tight places which has caused some of that paint to scratch off. You can buy belt clips for these tools off e-bay which is only a minor inconvenience.



Overall: Considering what you get for the price, this is a five star kit. Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit

First off, I'm a professional fabricator, and i've been typically really hard on my tools, especially cordless tools, but these have far exceeded my expectations. I bought this setup when i was in a jam, my heavy duty 18v Milwuakee crapped out after only 2mos of service, and only a week back from its first warranty repair (I'm no longer a milwuakee fan, sadly). Well, needing to finish a project for monday, and stuck looking for a new driver/drill on a saturday night, I picked up the combo kit at a Home Depot minutes before closing, figuring it would get me through the project, and the impact driver might come in handy for some light duty projects later on.



Well I was amazed after working with these for 4 mos solid. So small yet so powerful, and far more rugged than i would have expected for their light weight and plastic-y feel. And wow, did i say they are small? I mean i can put the impact driver in the side pocket on my cargo shorts, or back pocket of my carhartts and comfortably climb a ladder like that. They seriously lighten my load when I'm lugging a bag of tools to a gig outside the shop, too.



The only drawback I've found is an entirely acceptable compromise for the light weight and easy handling, which is short battery life between charges. But Makita makes up for this by including a sophisticated and fast charger.



In short, this works really great for the sort of work that cordless tools do well for; tough intermittent tasks where access is tight. Sure it doesn't have all of the brawn of some of the full-size makita 18v line, but really when i need that sort of power, I'll want to be using something Pneumatic or AC-driven.



Buy it if you need a lightweight tool for intermittent use. If you need something to replace a corded/pneumatic tool out in the field, you might want to bump up to the full size (lxt) line.

Have had this kit for just under a year. The weight of the tools is phenomenal. Very light and excellent balance. The impact gun is pretty impressive. The drill, however, doesn't really have the ooomph I was hoping for. And if you are doing a lot of drilling, expect your batteries to get very hot, and also to take a very long time to cool down before the charger will start charging them. I've had these guns heat up quite a bit while under heavy use, so much so that I've had to put gloves on. This is drilling into steel, by the way. These are great guns for the price and the weight, but under heavy usage (I'm a scenic carpenter in the entertainment industry), the drill is less than impressive. And the clutch just died on it. I'm going to stick with Makita, but I'm going for the more powerful guns.

The new LiOn driver usually runs near two hundred by itself. Add the impact driver that goes for close to this price AND include the spotlight and you definitely have a winner.



I've used the driver myself and it is a joy to use. It is very lightweight and the batteries charge in 15 minutes. So even if I'm using the drill full time, I can't run out of juice.

Anyone as confused by the compact vs regular lithium technology in these Makita Drills as I was?



I have used both the compact and the LXT version of the Makita Lithium cordless tool sets. Mostly the impact driver and drill/driver. I am a electrical contractor and am pretty hard on my tools.



First both sets worked great. However, I did find that I spent considerable amount of time fetching new batteries with the compact version of the drills. I found this to be irritating, and prefered to use the LXT lithium drill as it lasted twice as long and had maybe just a little more UMMMPHHH to it.



One of my employees who has long struggled with tendonitis in his arm will use nothing else besides the compact version. It is about a pound lighter and it makes enough difference, of course he gets paid the same whether he changes the battery pack ten times a day or five.



Bottom line, both drills work very well. The compact is so light it makes it worth it for people doing lighter use, difficult position, or constant ladder work. But overall I would say it is better suited for the serious homeowner/weekend-warrior rather than the full time contractor. The regular LXT(non-compact) tools, although just a little heavier, are still much lighter than previous technologies and feel like a bag of feathers in comparison to a Dewault. They also lasted longer on a single charge(twice the storage capacity in the battery cells), which was the key selling point for me and the little extra power (insert Tim the toolman grunt here) was well worth it. Then again, if I am light duty user/homeowner and not using these tools daily, the compact version would certainly fit better into my budget and would still do everything I needed it too.'


Detail Products
Detail Reviews
Click here for more information


Impact Driver Impact Driver Impact Driver

Ryobi


This Ryobi saw really impressed me. At around 7 amps I felt it would be underpowered but it has handled every job I have thrown at it. Its light and the variable speed dial works awesome. The only downside to the saw is the tool less blade change lever. After tons of blade changes it wears out and I have had to tear mine off the saw and use pliers to actuate the lever. Ryobi would have been wise to cover the inside of the plastic lever with steel like Dewalt does with their 18v recip saws. For the occasional user this saw is superb and I do recommend it. Ryobi Reciprocating Saw Kit'


Detail Products
Detail Reviews
Click here for more information


Ryobi Ryobi Ryobi

Battery Packs - 18 volt, battery


These little batteries are light, but they don't last very long. I only get 2-3 hrs drill time and less on more power hungry tools like saws, great for a radio. They also wear out fast. If you use them hard they will only last a few months and then your off to your factory warranty center. I have had my drill for 18 months and have worn out 4 batteries, if they weren't giving them away I would be very upset. Overall I still like the lightness of the batteries but that is it. They really need to come out with an improvement on this model. If I have a tough job for the battery tool I reach for the old NI CAD it heavy but it gets the job done. The "work hard till the end" is ok but it would be nice if you got a little warning that you were about to loose power. It is no fun to try to change the battery on a drill that is buried 2 or 3 inches into oak. Ridgid 130383001 18 VOLT COMPACT LITHIUM ION BATTERY PACK

I bought this battery and never held a charge. It was quite a bit less expensive than at Home Depot but worthless. I ended up having to buy one at regular price. The battery came in a plastic bag which should have given me pause. It must have been either a factory reject or refurbished. Do not waste your money.

FIRST, I mean no disrespect. Here is a message I just sent to Ridgid:



I purchased a Ridgid, 18 Volt Cordless Drill-Driver, MN R86007 on July 3, 2009. I bought and used it for homeowner level chores only, even though I am a 25 year veteran of the building industry. Neither the tool nor the batteries have been abused in any way. The tool is fine. In fact it's an EXCELLENT product!



My only problem is the batteries!



The two batteries I got with this tool stopped holding a charge about three monts ago, despite VERY light use since purchase. I have used many, MANY different cordless tools in my professional building career, starting with Makita in 1981 (also excellent tools). I have never, EVER experienced the kind of disappointing service from ANY cordless tool battery as I have with these. In fact, I have Makita NI-CAD batterirs that are still working after 8 years! The replacement costs for Ridgid, Lithium-Ion batteries are unbelievable -- especially since the whole LI technology will soon be upstaged! IMHO, the cost of replacement (even at Amazon) is preposterous, because ANY battery that sells for this price should perform very well for at least three to four times longer than these. I hope Ridgid tool users are not victims of the morally reprehensible practice of "planned obsolescence"! I keep hearing how proud you folks are of your tools and your warranties. I hope your policies rise above the rest of the power tool industry.



Please advise: What can I do to fix this problem?



Kind regards,

I have now had to replace the batteries on my 1 1/2 year old Ridgid tool set twice because of battery problems. The protection circuit in the batteries goes bad and won't allow the batteries to provide enough current to work properly. I'm sure glad they have a 3-year warranty - maybe by the time I get my 3rd set of batteries Ridgid will have fixed the problem.

Buyer Beware! I bought this nice shiny 18V Lithium Ion cordless 4 years ago....it has been NON-stop trouble. Last year, right before the "lifetime" warranty ran out (more on this below) I had it serviced and the repair shop that does repairs on these units called them "overpriced junk"...they said that they USED to be good quality, now just expensive.



2 new batteries, new parts/contacts etc. on drill



ONE year later - ONE dead battery (says it charges but doesn't run the drill) - ONE intermittent battery that sometimes works and then cuts out



******RIGID CUSTOMER SERVICE*****

Rigid has some 3rd party vendor that provides customer service through some type of web link called "Dashboard" where you have to log in everytime to find out anything. Evidently the job of this OneWorld service is to NOT do ANYTHING for their customers as I was stonewalled and eventually sent away with "we can't find your account" (whatever that means)....MEANWHILE their box sells the product as "LIFETIME WARRANTY"



REALLY? Who wants a new customer ? Hopefully not many of you end up in the same boat -spending very good $ for such junky product AND service.

I'll try to keep this mellow.



I bought a Ridgid cordless drill about 1-1/2 years ago to replace my well-used 10-year-old cordless with failing NiCads.



The first one I bought had one battery (it came with two) that was DOA. Home Depot exchanged the whole thing (they had not single replacement batteries in stock.) The batteries have never held a charge for a very long shelf life. They're supposed to. These never have. Now they don't even really take a charge. I charge them 'til the charger indicates they're charged. Can't even drill ONE HOLE! Yeah, so it's hickory, so what? Not ONE.



I rate this a "DO NOT BUY".



The only good thing about this drill is the orange carry bag it came with, and I'm not terribly fond of the color.

When I bought my drill a few years ago, I was thrilled to find one w/ Lithium Ion batteries. I've always felt that NiCad was a poor choice for power tools, given its "memory" issues. However, both batteries that came w/ the drill stopped taking a charge in about a year. I just went back to using my old Dewalt (whose NiCad batteries have lasted over a decade), since I couldn't find my receipt. It wasn't until I saw other reviews here that I learned I could have gotten replacements just based on the serial number. Since I have so much invested in the drill, I plan to buy one battery, and have them just replace it whenever it goes bad. Amazing that they can't make a decent one, though. Will never again purchase a Rigid tool!

Though these Rigid batteries work well and hold a reasonable charge, their life expectancy is way too short and Rigid provides TERRIBLE warranty service. I live in a city of 500,000 people and can find only one "authorize service center" and he says the wait on replacement batteries can be as long as 3 months.

As a customer I find this intolerable. Either produce a quality product or provide quality customer service. I rely on my drill and can not wait several weeks for a replacement batteries (I have two) and can not afford to waste 50+ dollars purchasing new batteries every 6-8 months.



The service center has to pay in advance for batteries and so does not stock them. When I dropped my batteries off he said he was waiting on 10 batteries from Rigid. In my estimation, Rigid has a significant battery problem that it can not fix, and there is a tidal wave of batteries coming back to them. They are overwhelmed and are probably "refurbishing" them and pushing them back on the market. - Battery Packs - Battery Pack - 18 Volt - Battery'


Detail Products
Detail Reviews
Click here for more information


Battery Packs - 18 volt, battery battery pack Battery Packs - 18 volt, battery

Golf History - golf history


If you love golf, you'll love this movie. Even if you don't love golf, you'll enjoy it. The cinematography is phenomenal. The makers of this movie used a specially designed camera in many scenes to follow the ball from shot to stop. One of my favorite shots was Ted Ray's blast through the woods, between the trees, and onto the green with the camera following the ball all the way! As others have said, it's the best golf movie yet, largely because the camera work and film editing added much to the magic of this true come-from-behind story. I also think the close working relationship between director Bill Paxton and the author of the book, The Greatest Game Ever Played, Mark Frost, added to the movie's charm and authenticity.



Francis Ouimet and Harry Vardon had something in common. They were `common', according to the societal standards of their respective times. One is American, the other English, born a generation apart. Vardon grew up to become a world-renowned golfer, but could never join "the club" in his own homeland because he came from the underclass. However, he did become a hero to growing boys in Europe and America, including young Francis Ouimet, who grew up across the street from the Country Club in Brookline, Massachusetts. Francis began caddying at a tender age, and there were those who saw something special in him. These gentlemen, and Ouimet's mother (at least in the movie), encouraged him to take his love of golf from the caddie stage to the player's arena. With the odds against him from several directions, he played his way into the hearts and minds of his American countrymen and the world, and into the record books, by playing as an amateur in the 1913 U.S. Open and winning.



Shia LaBoeuf (Holes) is perfect as Ouimet, and Stephen Dillane portrays the stoic, haunted Vardon. The movie overall was well-cast, and Josh Flitter, who plays Eddie Lowery, almost stole the show!! It's a good bet you'll be mesmerized by this wonderful film. Just remember, in the immortal words of 10-year-old Eddie, when holding onto that golf club "Easy squeezy, lemon freezy!"



Carolyn Rowe Hill The Greatest Game Ever Played

We watched this movie in the theaters with the whole family, including two kids under 10. I'm not a golfer, but my husband loves the sport. The movie has great story line, funny moments, a bit of romance and some thrilling episodes. It would make for a nice evening of quality family time.



Please note that the DVD is in widescreen format. That's the only reason I'm not buying it at this time, I'm hoping for a full screen version.

To fully appreciate THE GREATEST GAME EVER PLAYED, it's good to compare it with BOBBY JONES, STROKE OF GENIUS. Both films cost between $20M and $25M. Both were about the game of golf at the turn of the 20th century. Both focused on young, underprivileged underdogs who went on to become the best amateurs in the game, beating out their professional competition. And both show the influence of the great Harry Vardon.



BOBBY JONE, STROKE OF GENIUS, of course, is about Bobby Jones, only amateur ever to win all three tournaments of the Grand Slam in the same year. And he did it while also working on three college degrees simultaneously - thus the "Genius." Jim Caviezel (Passion of the Christ) did a decent job playing Bobby, although he didn't look anything like the man. And Aiden Quinn was good as Harry Vardon - even down to his golfing ability - although he was all but cut from the film because he wouldn't shave a goatee he had grown for another film.



While BOBBY JONES is about an entire golf career, THE GREATEST GAME EVER PLAYED is about one tournament: the 1913 US Open, held at Brookline Country Club in Brookline, Massachusetts. That was the year that a caddie - Francis Ouimet, who lived across the street from the country club - beat the two top British professionals, including Harry Vardon, and won the tournament - the biggest upset in golf history. Shia LeBeouf (Holes) does a great job playing Ouimet, and Stephen Dillane (The Hours) is superb as Vardon.



The biggest difference between these two films is in the direction. With BOBBY JONES, Rowdy Herrington (Road House) opted to do a very straight drama in the tradition of Chariots of Fire. It turned out to be far more than he could handle. The script is weak. There is far too much time spent on the young Bobby Jones, which contributes very little to the main plot. And visually, it is, well, boring. There are only a handful of creatively interesting shots.



But in THE GREATEST GAME, director Bill Paxton (Apollo 13, acting) pulls out all the stops. Not only is the script taut, but every part of it is essential. And the visuals are incredible, including effects that have never been seen in a sports film before, let alone one about golf. The art direction - including sets, costumes and graphics - is also superb, creating a totally believable and visually sumptuous world. You don't have to love golf to love this movie. That can't be said about BOBBY JONES. While both films have heart, THE GREATEST GAME also has fun.



When I first saw THE GREATEST GAME, there were a couple of things that bothered me. I didn't feel the love relationship between Francis and Sarah Wallis (Peyton List) was believable because their ages seemed so different. I just couldn't see her falling for a boy. I also had trouble accepting a ten-year-old caddy, Eddie Lowery, played like a true ham by Josh Flitter. It seemed like a typical Disney element (the kid who is smarter than the adults that surround him), and I just didn't buy into it. Then I discovered that that really was the way it was! Which doesn't make it any easier to believe, but at least it's true.



These are two very different films about similar events. While BOBBY JONES STROKE OF GENIUS is a good film (3 to 4 stars), THE GREATEST GAME EVER PLAYED is a great film (5 stars). Both directors had a vision; but Bill Paxton has proven that he can carry his out.



Waitsel Smith - Golf History'


Detail Products
Detail Reviews
Click here for more information


Golf History - golf history golf history Golf History - golf history

Water Recreation - inflatable boats, boating


Obviously the designers did not build this for whitewater, but if it can hold up to that - for the price, it is outstanding. We had it loaded with camping gear, food, and three people for 4 days, and it didn't even loose air. It will sit three comfortably. 5 is a stretch unless you are VERY comfortable with each other. Weight is no issue. This boat was filled to the brim with water several times and still skidded through shallow water. A pit stop to let the water out and we were cruising again. At one point, the raft was lashed against a rock and turned into the shape of a taco by the raging waters. I was sure it would break, but it didn't!

pros:

*The oars come in 4 parts that snap and screw together. Assembly is easy. The oar locks work well and allow one person to use two oars.

*The seats are comfy. They inflate and latch into the raft.

*It comes with a patch kit, but I doubt you will need it.

*Three air chambers make it sturdy. We could pump it up in less than an hour.

cons:

*No quick release on the bottom air chamber.

*1/4 inch rope is a tad too thin. Buy some 3/8 inch if you want to secure it.

*Only two oars. Intex Excursion 5 Boat Set

Note that I haven't used the boat yet in the water, we will be using it the following weekend and I will update my review in a couple of weeks after we actually use it. But I wanted to rant and rave about the boat nevertheless since it didn't have any other reviews, so I was a bit hesitant about ordering it. DON'T BE.



This boat is excellent quality, the plastic is very thick and durable looking, and it has excellent features to it. First off, the thing is HUGE. It measures 12' by 5' approximately, and it has PLENTY of room for four adults, or like us, 2 adults and 5 little ones. The weight limit is high as well, I've seen it listed at 880 pounds but it says 1000 on the box. It has easy instructions in spite of all the bells and whistles it has. I highly suggest ordering a Coleman quick-pump to pump it up, it is well worth it and I can't imagine blowing it up with the pump they provide, this thing TAKES A LOT OF AIR. Paddles are excellent quality, unlike cheaper brands that have complaints against the paddles.



Note that there is a LITTLE plastic ruler in the package somewhere that you use to put the correct amount of air in the boat. Keep an eye out for it, we lost it initially until the I discovered the toddler had found a new toy!! LOL It works perfectly, you set it on the same ruler on the boat and blow it up until the measurements match. Little features like this that make it easy for non-boaters to figure out are really what makes this boat wonderful. It has 4 areas to put your fishing pole in, paddles can be one double or you can make them into two smaller ones and have nice, long "paddles" on the end.



All in all, the boat looks wonderful and was easy to set up with the simple directions they provide. I highly recommend it at this point, but will update after we actually use it in the water. I believe this will boat will last us a LONG time in the water with proper care, and for the price of less than 150, can you really beat it? Only thing I would add to the set would be an additional paddle set, since the boat is large and it does have two oar holders, I recommend another set.



************

Update: After using this boat on the Buffalo National River, I have to say that we REALLY liked it. It would be near impossible to flip it in calm waters, there is lots of room, the oars work wonderfully and are easy, it is tough plastic and stood up to our scraping on rocks and gravel easily with no wear, etc... What more can I say? It's everything I expected it to be after receiving it, and I am very pleased!! I was VERY happy with the fact that it would be hard for it to flip in the water as well, my hubby climbed in and out of the boat and it didn't even threaten to flip. So I highly recommend it!!

My wife and I purchased this after a lot of research and we have had no regrets. It is quite spacious (we loaded it with 3 adults and gear) and extremely durable, with no experiences of air loss despite hours on the water. We also purchased the motor mount and a Minnkota motor along with a deep cycle battery for leisurely stretches (do NOT get the battery that you can purchase in combo with this - you'll need at least a 75 amp hour rechargeable battery). We have had ours on lakes, rivers as well as to the beach. So convenient and rugged. Its great to purchase something and be so pleased with the results on all points. (Note!!! - if you take this out with a motor you WILL need to register it and display the registration on the side of the boat!!!)

I debated long and hard between getting the Excursion 5 and the Seahawk II. I wanted a boat that I could immediately take out and go rowing, but one that is durable (sometimes there are branches sticking up in the shallow river here) and comfortable. I also wanted to get a boat that I could eventually mount a motor on in the future.



After reading tons of reviews -- and going to the Intex website and other forums -- I bought the Excursion 5 because some forums said the Seahawk II doesn't have motor mount points (this is not true) and some people on here commented that the Excursion 5 is made out of the same "Super-Tough" material as the Seahawk II (this is also not true, but it's very confusing and even the Intex website doesn't make it clear. The Seahawk II is more rigid, can be inflated to higher pressure, and is more puncture-resistant because it is actually a 3-ply system including Super-Tough PVC OVER a nylon fabric layer)



As soon as the Excursion 5 arrived, I realized I had bought the wrong boat for rowing my girlfriend and I around. The boat is too wide and oars too short to really reach into the water well, and the oar locks are fixed in place -- not rotational like the Seahawk II. These two factors make the boat nearly impossible to row.



I immediately ordered the Seahawk II and have taken it out and it is great to row around in (comfy for 2 people, I don't see how you could fit 3.) I thought about what to do with the Excursion 5, and I've decided to keep it because it is a bigger boat and seems like it could be fun to take a larger group (up to 4) people out on it, once I get a motor and mount.



So I want to set the record straight if you are debating between these boats like I was:

1) The Seahawk II is more rigid and durable than any other Intex boats except the Mariner. The Excursion 5 vinyl is nice and thick, but it's still soft and I am still concerned it could rupture if I hit a branch or rock the wrong way.

2) Many of the Intex boats have motor mount setup, including the Seahawk II -- the Excursion 5 can only support up to 1.5 hp because it is not as rigid (the Seahawk II is rated up to 2 hp and Mariner up to 3 hp)

3) The Excursion 5 is a bit bigger, so if you need to fit 3 or more people, it might be the boat for you.

4) Don't expect to go rowing in the Excursion 5. Get a narrower boat, preferably with rotational/swivel oar locks. Maybe if you had 4 people paddling (with an extra set of oars) the Excursion might work okay. - Inflatable Boats - Boating - Intex - Water Recreation'


Detail Products
Detail Reviews
Click here for more information


Water Recreation - inflatable boats, boating boating Water Recreation - inflatable boats, boating

Excellent Quality - 1080p lcd hdtv, toshiba tv


I ordered this TV from Amazon about three weeks ago, and received it one week later. Although I was concerned about safe shipment of such a large object, it arrived in excellent condition. The packaging, with foam plastic inserts to support the TV at all four corners, was quite impressive.



Set-up was very simple. I only had to look up a few points in the manual. The manual is even written in legible English!



The picture quality on this TV is excellent. I watched a football game on broadcast TV, and that was a completely different experience from watching the same games on my old CRT TV.



I bought this TV for use in my "Home Theater" system that I am still putting together. Playing movies from my HTPC or watching Blu-ray movies really demonstrates the excellent picture quality of this TV. Just as an aside, the remote is easy and fairly intuitive to use. That's not a big point, but a poor remote can frustrate the user of an otherwise excellent TV. This remote works well enough that it doesn't add any irritation to the total experience.



It was when I hooked up the TV to my existing stereo receiver/amplifier that I discovered one point about the TV that is less than perfect. I had not noticed any deficiency in the sound while watching broadcast TV or even watching DVD movies on the TV. But once the stereo receiver/amplifier was hooked up and I could hear the sound over that set with top quality Altec-Lansing speakers, the sound quality was much better. In short, if you want the best home theater experience with this TV, it will need to be supplemented with a good amplifier and speakers. But I expected that going in. I'm not downgrading the TV set just because its audio performance, with its small speakers, isn't quite up to what I get out of my 100 W amplifier and 15" speakers. Heck, each of those speakers cost almost as much as this TV!



This TV set is great for what it does - providing an excellent picture. The fact that it isn't also a professional sound system is irrelevant to its function. Besides, if we have a home theater system, we will have the tuner/amplifier and speakers already for other purposes.



Hooking up the audio output from the TV to a separate amplifier may be a trap for the unprepared. The TV sound out is via TosLink, which is an optical digital signal. I knew that from the Amazon description and pictures of the input/output connections for the TV. I had already ordered a TosLink optical cable and an optical/digital to analog sound converter and two RCA cables to connect to my amplifier. The total cost of those items was about $50. Not a big deal, but just an advance notice to any purchaser of this excellent TV that you really do need the cables and D/A converter, because the sound from your existing home theater or stereo amplifier and speakers will be needed for the complete enjoyment of this TV. If you have a more modern amplifier with optical digital input, only the TosLink cable will be necessary.



All things considered, I don't have any complaints, and I would buy this same TV again. In fact, I'm thinking about buying another one for my bedroom!



Five Stars! No doubt about it! Toshiba 40G300U 40-Inch 1080p 120 Hz LCD HDTV (Black Gloss)

I have nothing but good things to say about this TV, great purchase and I am loving it. I bought it for my bedromm and was limited by the size of my cabinet, it fits perfectly and the picture is wonderful. It was extremely easy to set up, just plug it in to my cable and the wall socket and we were off and running. Living in a single household, I need things that are easy to install and this fit the bill.



Thank you I only reget I did not buy it sooner.

I have ordered and received MANY similar sets in recent months. This Toshiba puts all others, including many 42" sets to SHAME.

Picture quality is fabulous. Sound quality is fantastic. Best of all are the many HDMI possibilities, composite and AV connections. PC compatible is another plus. Believe it or not, my all time favorite is the remote, which has the buttons in a white color to off set the black back ground. This makes it extremely easy to see exactly what you are doing, especially in darkened room with just your Toshiba on. However I will say that Toshiba should update the remote just a tiny bit. At least I think a button labeled TV/VCR is outdated. Prices do vary so do you home work. My set was originally USD662.00 and just 1 week later USD557.00. Amazon as always came through and refunded my account the difference. BIG PLUS NO INTEREST FOR 24 MONTHS!

This Toshiba 40G300U at times has a beautiful crystal clear image when the lighting on the show is bright however if there is any darkness there is NOTICEABLE and distracting lighting spotlights coming out of all corners, it is all I can see, I have adjusted the color and Dynalight and Backlighting, which helped some but still irritates me that the corners are faded compared to the rest of the picture.

The sound quality, as I was aware of through reading reviews and was prepared for it is pretty tinny and muffled sounding I really have to jack the volume up to hear it.

The base of this tv feels like cheap plastic which is alright with me its pretty unnoticeable once the T.V. is positioned wherever it will be, what bothers me is how far it sicks out the front of the television so that the T.V. has to be pushed back about 6 inches more than I would like in the cabinet so it doesn't over hang the base of the cabinet. I checked to make sure it is on the correct way, and as there is a hole in the base back, there is no other way it could be installed.

I had read reviews about the Toshiba LED light logo and how people didn't like that, but it turns off/on easily from the menu and is not the problem I was worried it might be.

I bought this T.V. because of an over time payment option if I had the money out of pocket right away I would probably go with a higher end LED LCD for better black lighting qualities.. Right now I like the tv but I am hoping I will just get used to the poor spotlighting black qualities in the picture. - Toshiba Tv - 120hz - 1080p Lcd Hdtv - 40 Inch Lcd'


Detail Products
Detail Reviews
Click here for more information


Excellent Quality - 1080p lcd hdtv, toshiba tv 120hz Excellent Quality - 1080p lcd hdtv, toshiba tv

Electronic Arts - shooter, battlefield


The single player is great, you wont be disappointed! Graphics are awesome, and the backdrops are very nice eye candy. You can switch out your guns for different ones of your choosing when you come across certain "special crates" scattered around any given level, which is nice because that means you can switch up your play style when YOU want too. The single player campaign is short and sweet (prob 8-10 hours play time), the story doesn't grab you like MW2's, but enjoyable none-the-less. Assuming that the bulk of people buying this game are doing so for the multiplayer, i'll move on to that and devote the rest of my review to it.



I downloaded the demo for this game a little while ago and hated it. The controls were completely different then MW2 - i especially dislike that they use the right movement stick for ducking. Can't tell you how many times i try to shoot a guy and ended up ducking and shooting at the same time. So i put it away and went back to MW2, as i was playing i realized that - "i hate this game", i'm at the 4th prestige and have over saturated myself with it. I cant stand the quick kill quick death formula anymore, the horrible spawn system, the team selection system, and especially the lack of team work i constantly come across. There is also the infamous "MW2 law", similar to "Murphy's Law", where anything can go wrong in a match and when it does, it always seems to happen to YOU. Ofcourse MW2 is a great game and a worthy purchase, but i personally have had my fill.



That being said, it was unfair to judge BFBC2 so quickly when i had put such an insane amount hours into MW2. So i picked it up again and gave it another shot...i was hooked! I was playing as a medic and realized that i actually wasn't focused on killing people, i was running around reviving my teammates and dropping health packs to keep them going, ofcourse i took out a few stray enemies here and there. "Wow, this is different" i thought, and when i realized how many points i was racking up i liked it even more. I"m actually HELPING my team and getting a ton of points for it. That brings me to the most important aspect of the multiplayer, you are actually encouraged to work as a team, which is a nice change of pace compared to MW2. I get just the same amount of points for shooting someone as i get for reviving them. It works beautifully.



There is a leveling up system which is similar to MW2, nothing as developed though, but there is enough there to keep you coming back for more and you do unlock different sights, guns, gadgets etc... Some are just for the particular class you use i.e - medic unlocks larger health packs, but others are more general and can be used for any class, i.e - heavy vehicle perks.



The first BFBC had 2 deal breakers for me. One was their crazy health system where you jam a needle into your stomach when your health got low, which ofcourse is something you would have to do 50 times a match. The other was the lack of any kind of kill cam! It's no fun being sniped over and over again and having no idea where the sniper is when you respawn. THANKFULLY, both of those deal breakers have been removed. Your health regenerates (no needle to the stomach required) and there is a kill cam, you don't actually see the enemy kill you like in MW2, but you follow them around until you respawn so you know where they are and can carry out the proper justice.



Also, locating enemies is somewhat unique to this game, when you see an enemy, you have to press the back button on your controller and then a red insignia appears over their head and they show up on your entire teams map for a brief amount of time. I can't express how gratifying it was to spot 3 snipers on a hill, press the back button, and watch them get lit up by my team - rockets, bullets, you name it, it went their way. Also, you get assit kill points for things like that, again, encouraging team work.



BFBC2 is a great game, very different then MW2 but in a good way. If you need a break from MW2, give it a try, you wont be disappointed. Again, one of the most impressive things about the multiplayer is how it rewards you for team work and incourages it. If actually playing a first person shooter AS a team, not just "lone wolfin it" while you're IN a team, sounds good to you, pick this game up, you wont be dissapointed.



I gave this game 4 out of 5 stars because it's not perfect. What game is? I have experienced some issues actually getting into a multiplayer match (can't find a match, busy, error, whatever,it means that their servers are full and they can't handle it, and several matchs have ended abruptly due to server issues. But once you actually get into a match, it's a ton of fun.



FYI: Snipers, snipers, snipers! What is the deal, everyone and their Mom wants to be a sniper. It seems that atleast a third to half of the players in the game are snipers. Not sure why, they always have the least amount of points and seem to stay in one spot most of the game.......i digress. Switch it up!



***UPDATE (03/14/10)***



I've been playing this came for quite sometime (all medic, recon, and heavy vehicle upgrades have been unlocked), i must say that it has held up well, although some of its flaws are more noticeable, nothing major per say, but worth mentioning, 1st one being the most important.



1)It's much easier to be a skilled pilot then to be a skilled engineer w/the rocket launcher.



Apache helicopters with missles are extremly unbalanced. What i mean by that is it is far to easy for a skilled pilot to get an insane amount of kills, to the point of feeling unfair because it's so hard to take it down. None of the rocket launchers "LOCK" on, yes you can guide the rocket, but you can't actually "LOCK" on, which is frustrating. When playing 'rush' on the map featured in the demo (the snow map which takes place during the day), there is a powerful Apache on that map, but you're given a good amount of tanks which help with taking it down, so it's not that extreme.



But......



This unbalance issue is taken to a whole new level on the map consisting of the 3 islands (with an autumn backdrop), when you're playing 'rush', the defenders are given an EXTREMLY OVERPOWERED Apache helicopter when/if they reach the 3rd island. I've played 2 games thus far where my team was about to seal the deal and take the 3rd island when the defenders hopped in that freakin apache and annihilated everyone, it got so bad that most of my team dropped out, including myself. No point in playing any longer when you've died 5 times in a row because the apache is hovering over your spawn base firing rockets at you as you spawn in. I equipped the engineer class and so did half my team and we were shooting rocket after rocket trying to take it down, nothing was working. By my 5th death in a row, of not be alive more then 30 secs, i dropped out.



The first time it happend, it was extremly frustrating because my team was actually good, everyone was playing their role well, that's why it seemed extremely unfair.



The second time, i knew the drill at this point and gave it 5min, if it wasn't taken down in that amount of time, we dropped out. At that point, it just becomes a waste of time.



This is by far the biggest flaw i've found in the game. Basically, you've invested 20-30min to get that far in a match, then putting all player skills to the side, it boils down to who can get to the Apache first. They need to either lower the health of that particular Apache or make the rocked launcher system easier to use against it, ie-better guidance, tracking, more powerful, something! It just seems incredibility unbalanced.



2)Spawning is a lot better then MW2, but could use a bit of work.



I was playing a 'rush' match and my team was defending and we were actually able to jump the spawn base of the attackers and smother them the entire match, they didn't get to set one 'com station' off, seemed unfair for the other team, we should'nt have been able to do that.



Also, i've spawned into mortar strikes twice (spawning on a teammate), that was purely bad luck on my part though, nothing against the game.



3)Match making protocol can use some work.



I've found it useful to hit/hold the 'back button' when i first get into a match because some of the time i find that i'm put on a team that only has, let's say 7 people, compared to the other team which as 12. Or i'm put on a team where the top player has 500 pts and the other teams top player has 1600 points, usually a good measure of how "good" your team is going to be.



Again, my rating still stands, it's a great game and a ton of fun, just be aware of the 3 island map playing rush, try to get to that Apache first, if not, be ready for game over. Battlefield Bad Company 2 - Battlefield - Xbox 360 - Shooter - Video Games'


Detail Products
Detail Reviews
Click here for more information


Electronic Arts - shooter, battlefield xbox 360 Electronic Arts - shooter, battlefield

Door Stopper - home security, door stopper


I read all the reviews before I tried this product. I am very concerned and picky shopper. I thought I would give this a try. I believe the key to this product is the flooring you are using this on. The foot on the lock works excellent on title or wood. I would not recommend this product on carpet.



One key point to remember...the farther away you have the base from the door the less strength it has. Try to get it between 70 degrees and 80 degrees. I was able to knock it out of place at 50 and 60. I normally do not worry about safety; however, I am a heavy sleeper. I can fend for myself but I have to hear it first. Let me know if you found this helpful! Master Lock 265DCCSEN Dual-Function Security Bar

With all the hype about bump keys (which basically renders most locks useless), I tried to think of something that can counter it. So far, this is the only thing that I can find short of buying a top of the line lock for a $80 - $200.



[Pro]



It's moderately effective with a low price.



It's lightweight and portable. You can bring it on trips.



It's versatile (it's adjustable and can be used on any door that swings inward and sliding doors)



This will slow down potential intruders, potentially either buying you precious extra time or alerting you.



You can use it as a makeshift bat if needed.



It has better quality than similar competitors.



[Cons]



It only slows down a potential intruder. It won't stop them. This device is common enough for them to think of ways of countering it.



The top piece that hooks into the door knob is made of cheap plastic. It will eventually break. Check it often.

The device does what is suppose to. If someone wanted to break in the front door of our apartment they would have to kick it down... and we would actually hear it.

We were more afraid of someone "sneaking" in the place, rather than breaking in.



When it is stretched out to the fullest it seems a little flimsy.

An Added bonus is that it also works as a door stopper to hold the front door open.

The silver button that locks the bar length in place slips out of the hole VERY easily, allowing the bar to collapse. I tested this bar by simply leaning with my full weight (220 lbs) on the outside of the door, and the button gave way, allowing the door to open freely. This little button BARELY makes it through the hole on the bar. Rather than return this thing, I am going to use my drill to make some modifications, and use another metal pin to lock the bar in place. Also, the foot of this thing slips pretty easily, even when moistened and pressed against a high-friction floor.



Master Lock should be very ashamed of this piece of garbage. It will negatively influence my future security purchases.

This security bar is very easy to use and a good alternative for providing additional protection. There are questions about how it's installed and its width - this is from the package:



* This security bar adjusts to fit most sliding and hinged doors

* Simple push button adjustment. No tools required.

* High strength steel tube (20-gauge)

* Portable, collapsible to fit most suitcases (**I wouldn't try to bring it inside a carry on**)

* Ideal for home or apartment (entry doors, interior doors for privacy, garage access doors), student dorms and travel

* Limited lifetime guarantee (see your store for details) (**Not sure what it means but keep the receipt**)



For use with hinged doors:

* Non-marring yoke designed to work with most types of door hardware. Can be removed for use with sliding glass doors.

* Pivoting ball joint (assures full contact with the floor)

* Padded foot provides sure grip on most floor surfaces and protects against finish damage.

* For hinged door, adjusts from 30" to 44.5"

* Should not be placed on loose rugs or floor mats

* To install, adjust bar length so padded base is 15-18 inches from bottom of door when yoke end is placed firmly under door knob

* Adjust length by rotating tube until silver button pops up

* Place yoke end tightly against the underside of the knob

* Slide padded base of security bar toward door until snug



For use with sliding glass doors

* Remove non-marrying yoke from end of security bar

* Adjust bar length to fit in the sliding door track

* Allow enough slack to remove the security bar quickly

* For sliding door, adjusts from 27.5" to 42"



For childproofing purposes, a Charley bar is better. If you don't have one, this bar may be better than the typical broomstick but you could consider placing an additional sliding glass door lock on top in case your child figures out how to lift it off the track (not too hard as it's not pressure fitted). In this regard, the Master Lock 251D which had a pressure lever was superior, as it could be wedged firmly high up, out of reach of children.

This is just what I was looking for. A little extra security for my front door. We have tile in the entry way, and when in place it is very secure. To test it out I have tried to open the door with a lot of force, with it in place. It kept the door closed and secure. It is very easy to assemble, adjust and use. Several of my family members have purchased it and love it also. Would buy again.

I am so glad I puchased this security bar. I learned the hard way how well it worked. The first weekend I used it I locked myself out (went out of the garage door and did not have my garage opener with me) and had to climb in through the balcony. The security would not budge and the small opening that was available when we unlocked the door with the key was not large enough to poke anything through to try and dislodge it. This is a great buy in order to get some security. An intruder would literally have to break down the door or break the glass (if you have it on your door) to get in. - Door Lock - Charlie Bar - Door Stopper - Home Security'


Detail Products
Detail Reviews
Click here for more information


Door Stopper - home security, door stopper door lock Door Stopper - home security, door stopper