Tuesday, 8 December 2009

Dual Alarm Clock - nature sounds, clock radio


The clarity of the voice, even from another room is outstanding. The digital readability that another reviewer finds fault with? I don't know what he's talking about because this radio's readability is as good as it gets. He must have it set on dim read out. The reception on FM is excellent. On AM, it's absolutely amazing! I live in an NYC apartment with so much ambient AM radio interference that I seldom enjoy AM -- up until this Sony ICF-C707! Nearly FM quality on AM! All this with great style. This is one of those rare machines that is nearly perfectly pleasing. Sony ICF-C707 Clock Radio with Programmable Nature Sounds for Sleeping and Waking (Black)

This clock radio is much better than I expected. The reception is excellent...much better than my previous clock and my wife's. The blue light on the display has to settings, both of which are very bright at night, so I turn it off. The only feature I would change is how to set the alarm. If you miss a step, you can easily put the alarm type in the wrong mode (e.g. AM vs. FM vs. Nature sounds). The speaker is very loud, but is nice for listening to the radio because of the volume. Another nice feature is that you can independently set the volume for alarms A and B. Also, you can have the alarm for only weekdays, weekends, or both. That is a great feature and now I will not have my wife yelling at me on Saturday mornings for forgetting to turn the alarm off. I recommend this.

This clock has many nice features, including multiple alarms, nature

sounds, auto daylight savings, battery backup, and a wide snooze bar.



But if you can't glance at the clock and read the time easily, then the

product fails. The numbers are BLUE, and the backlight is also BLUE.



The backlight on the LCD display has 3 settings: bright, dim and off.

You can switch between these by pressing the snooze bar on top.



The bright setting is too bright, and the dim setting makes the clock

difficult to read at night or early morning when you're half-asleep.



Instead of blue numbers with a blue backlight, Sony should have went with

something more readable, like black numbers with a white backlight.



Disappointing...



** UPDATE - Problem with Buttons/Controls:



In the morning when waking up, most people hit the Snooze button once or

twice, then press the Alarm Off button. The Alarm Off button on this Sony

clock is tiny (3/8" x 3/16"), and is grouped with 7 other identically-sized

buttons. These tiny buttons are almost flush with the clock.



The Alarm Off button does not have any tactile clue, such as a raised 'dot'

or a lowered 'dimple'. So it's difficult to find this button by touch

early in the morning. Did the Sony designers actually test this clock

with a focus group before selling it to the public?

I bought this little clock radio primarily because I saw from the display model that you can connect an external AM antenna. The external antenna this thing comes with is plenty good enough to pick up my favorite stations where other alarm clocks were not.



It plays talk radio pretty well and has just enough features. I really like the noise maker and audio in features. Also key for me is the digital tuner (it can be so hard to get a dial at just the right spot) and the ability to set the volume for the music alarm (since I often listen to the radio when going to bed at a volume way too low to ever wake me up)



It doesn't have an ipod dock which is a plus for me since I don't use an ipod ever and would feel like I was paying extra for a feature I would never use.



If being able to check the time at night is important to you then I would only recommend this if you plan to place it on your nightstand. It would definitely be difficult to read from across the room but is perfectly readable at the middle brightness setting from my bed.

The title about sums it up. I saw this unit in a local BJ's and was blown away by the sound. This clock radio is *incredibly compact*, yet the sound that you get out of it is much more voluminous than the size of the unit would suggest. The antenna also picks up FM signals very well (even signals that are sometimes weak in my car and full sized stereo in my living room).



I can't say that I understand the complaints about the LCD brightness as it offers you three settings to choose from (bright, dimmed, and turning the backlight off completely) which is probably one more than most other units (usually just bright and dimmed or on and off). If the backlight -- even at the dimmest settings -- is too bright, then I suggest simply leaving the backlight off and hitting the large snooze button a few times (which toggles the brightness) when you want to check the time in the middle of the night and turning it back off.



Certainly, it can be said that some functional aspects of the unit have been sacrificed for the aesthetics of the unit (i.e. many of the buttons are small, untextured, and roughly the same size), however, I find those complaints to be minor misgivings for an otherwise superbly designed clock radio. These small design weaknesses are not enough to dock a full star.



With two separate alarms, BATTERY BACKUP (it even comes with a batter), a well designed antenna, crisp sound, audio-in jack, nature sounds (haven't used these), and easy to use interfaces, this unit is a keeper. It's so good, I'd consider buying one just as a compact desktop radio for the office. I'd say that the only way this unit could be better is if displayed the date and if it offered more presets (like a "Preset A/B/C" option) - as it is, you can only set 5 presets using the numbered nature sounds buttons.

This radio is tiny, much smaller than you expect from something that has so many features. In addition to an AM and FM antenna (the FM antenna can't be easily switched out for something better, while the AM antenna can), there's a 3.5mm jack for your iPhone/iPad, which is nice because you charge it using something else at the same time. (Too many similar products only work with older iPods/iPhones). The display is large and bright enough, and the nature sounds are pleasant. My only wish would be an audio-out jack so it could be plugged up to louder speakers. Otherwise, this is a nice compromise between a full-featured high-end iPod-compatible radio and a cheap alarm clock. - Nature Sounds - Clock Radio - Sony - Alarm Clock'


Detail Products
Detail Reviews
Click here for more information


Dual Alarm Clock - nature sounds, clock radio clock radio Dual Alarm Clock - nature sounds, clock radio

Good Value


These gloves are perfect for the older lifter performing heavy bench presses. I have found that as I age I lose the natural padding in my palms and these gloves are great for benchs as they seem to compensate for this loss. There is no loss of control or grip with these gloves.



These gloves appear to be very durable as well although I only use them for bench presses and no gloves for other exercises. I will be stocking up at Amazon before rising oil prices increase the prices. GNLF Neoprene Lifting Gloves XL - 1 pc,(Valeo)

I've been using these gloves for years. I like them because unlike leather gloves, they don't have any seams that can hurt your hand. They really cushion your hands very well. They tend to run small. I have average size hands, yet I must wear extra large gloves, otherwise they are too small. The only con is that they don't last too long because the neoprene will eventually tear, however they are relatively inexpensive. I tend to replace them yearly. I highly recommend them to my friends that work out.'


Detail Products
Detail Reviews
Click here for more information


Good Value Good Value Good Value

Woodworking - stanley, woodworking


This pry bar goes by many names in my field. The workders call it a 'wonder bar,' while most carpenters refer to it as a 'flat bar' and roofers call it a 'shingle bar.' By any name, it is a great tool for any home improvement worker or home owner. I have been using this tool for over 20 years. While both ends are beveled, myself as well as other workers, have found that grinding back both ends sharper to produce a longer bevel makes the performance even better for taking out and removing roof shingles and flashings. I have even used this tool to chisel out bad pieces of decking. The curved end of the bar can be placed over the head of a gutter spike and struck with a hammer to remove the spikes without damage to the gutters. The bar also comes in handy when on a steep roof or working around chimneys and dormers. The bar can be placed between the space in 1-by decking to help support your foot on a steep pitch roof. It is made of fine quality steel that will last a lifetime. Stanley 55-515 12-inch Wonderbar Pry Bar

Having owned two of these pry bars for years, I must say this is a must-own tool if you plan on doing any sort of extensive renovation - especially if it requires any sort of ripping-out, tearing-down, or prying-loose activities. I have beat on this bar with a hammer, used it to pry loose uncountable objects, pulled thousands of nails with it and I cannot fathom an occasion when it would break.



Extremely useful and quite indestructible!

As is stated in the title, this thing does it all. I have used it extensively now for every home improvment project I have taken on. My wife, who loves the demolition part of home improvement, has now gotten one of her own. This thing has never let me down. I have removed trim, nails, plywood subfloor, and even a shower with this tool and it never quits. I own two and I have a son on the way, so I will probably by a third



Clint

[...]

For those of us that work sitting on their backsides all day, there is nothing quite like going home and destroying something at night to take out some tension. The pry bar is the perfect tool for this task.The 12 1/2" pry bar may be a bit too short for the largest jobs, but this size is a perfect size for the majority of jobs. Whether ripping out drywall, removing molding, pulling stubborn nails, or popping tiles, this is the tool. The tool is angled differently at each end. One end is for popping items like nails. The other end is better for prying tiles, for example. Because of the different angles, you gain different levels of leverage.This is the tool for home (destruction) improvement.

Indespensible tool for one's earthquake / natural disaster / survival kit. All emergency responders carry a pry bar in their kits (not necessarily this one) for good reason. As noted, the fit and finish isn't stellar, but it's a pry bar. Does one job and does it well.

After the April Tornado, we ordered the wonderbar pry bar. It has been wonderful and we use it nearly everyday. It is small and light enough to carry around everywhere. It has been great for pulling nails out of boards (decking, fences, and barn boards). We have always used hammers for pulling nails but decided to try the wonderbar and we have been very pleased. This has become our favorite handy little tool.

This is the perfect size for homeowners that do their own work on their houses.



I have used this for both demolition and the installation of things when I didn't have an extra hand to help me. It is a solid piece and well worth the money.



Huge plus: It's made by Stanley, so it's made in the USA.

Previously bought one of these for way more money at a local store before it was stolen... Had another need for one, saw it here on Amazon for way cheaper and just got two of them (now if I can just find a buddy!). This thing just simply works and it works well. Tearing down drywall, pulling out nails (even when the heads are popped off) or just about anything. Great shape and comfortable to use. If you are going to demo, this is the first tool you need to get, hands down...

The Wonderbar has been around a long time. The wide prying surfaces minimize crushing the wood and the different curves at each end fit just about any situation from moulding removal to trim, nail pulling and siding removal. As was already mentioned the ends can be thinned down for tighter joints with less damage. Very tough pry bar. You need this tool.

This little pry bar gets the the job done. The size is great. The steel is strong. I just wish the manufacturer had used a little more care in production. There's notable sputter along some of the edges, and, as noted in other reviews, the edges could use with a little grinding so it fits better between those boards you're ready to pry apart. - Tools - Stanley - Woodworking - Pry Bars'


Detail Products
Detail Reviews
Click here for more information


Woodworking - stanley, woodworking stanley Woodworking - stanley, woodworking

Usb Cable - mp3, sandisk


Seriously, the moment I plugged it in the wire got so hot it melted the outer plastic.

If I wasn't standing right there watching it, who knows, it could have started a fire.

Do not buy this product. It really isn't worth the risk. Retractable 2-In-1 2.0 USB Data Hotsync & Charging Cable For Sandisk Sansa e200, e250, e260, e270, e280, e200R, e250R, e260R, e270R, e280R c200

It did work a few times but now I'm getting disconnection errors. The wire is really thin and flimsy and has no strain relief at all where it enters the plug on either end. It's probably worth spending a few cents more. I was really thinking that the retracting spool thing would be great, but realistically the cable just can't handle the stress. The plug at both ends seems a bit cheap too. I hate to say don't buy it but honestly this isn't something I would purchase again.

I bought this as a replacement cable for my Sansa E260. I'm sure I will eventually find the one I misplaced. For not however, this one is working. I have used it both to charge my Sansa and to add songs to it. Every now and then I have to unplug it and replug it in to get it to register for file transfer, but could even just be an issue with my computer. The Retracable feature is nice because it coils back up and I just stick it back in the little bag it came in and in the drawer so I don't lose this one.



Pros:

+Works as a good replacement cord for charging and file transfer

+retractable feature keeps it compact



Cons:

-doesn't always register when plugging into the computer(again, could be a computer issue or Windows Media Player issue, not the cable.

Not only is this product perfect for keeping things neat & tidy without all the extra cord in the way, it also charges my Sansa e270 in just a fraction of the time it takes to charge it with the USB cable that came with the MP3 player! It's also easy to tuck into a small case (think digital camera size) where I store & transport my MP3 player along with all of the other accessories I keep with it. Finally, I've pulled out & retracted the cords hundreds of times with no problems or signs of wear. The cords still retract flatly & fully after several months of frequent use.

i bought this cable to replace the cable that came with my mp3, i picked it because it said it worked on my mp3 and it was a very good price, so if for some reason it didn't work i wouldn't be out of a lot of money. so i got and it works great it charges and transfers songs just like my old cable, i would recommend this to a friend awesome product - Charger - Usb Cable - Sandisk - Mp3'


Detail Products
Detail Reviews
Click here for more information


Usb Cable - mp3, sandisk mp3 Usb Cable - mp3, sandisk

Dust Collector Accessories - delta, benchtop planers


when I bought my Delta 22-540 planer several years ago, there was no way of catching the piles of chips and dust as they were made. A couple of years later there still was no dust collection accessory available so I quit looking. I happened to do a web search a few weeks back just on a whim and there it was.

I couldn't be happier with this product. It does the job well. It seals where it needs to, a large funnel shape helps chips flow to dust collection port, and installation took all of two seconds. Spin off the wing nuts, lift off old chip deflector, slip on the dust collector, spin on the two wing nuts.

Done. DELTA 50-359 12-Inch Planer Connect

this is the best thing to hit a planer , you will wear out a shop vac trying to keep up with the chips and you still wont get it all .but this makes that easy and you dont miss any dust plus i think it helps to cool your blades which makes them last longer . it is no doubt a good addition to anyones delta planer.

My only "gripe" is that Delta should make this standard equipment on the TP305 instead of having to buy it as an add-on.



That said, the product is as easy as it gets to put on. A few screws and the old one is off and the new one is on. It fits 4" dust collection hose perfectly. I hooked the new planer hood up to my Habour Freight 1HP dust collector. I planed some white oak and with the DC hooked up, nothing was left behind. The new DC adapter for my planer worked perfectly.



If you are debating on whether or not it's worth it to buy this adapter, I say "heck yes!" Before I had a DC my planer left chips and dust all over the place. With my DC and this adapter, it's totally clean.

Yes, I could not believe it, but this darn thing picks up about 90% of the sawdust from my Delta planer. I had to use some duct tape to attack the connector to my 2" vacuum hose, but even that works great. The Delta people need to include this when purchasing their planers.

If you have this planer you need this chip collector. It works, it fits, It's easy to install, you'll get a better cut without the chips flying all around getting caught between the knife and your lumber. It's cheap. I have had this planner for 10 years I should have got the hood sooner. You will need an adapter if your not set-up for four inch collection.

I was a bit weary of ordering this product since there seems to be conflicting opinion as to wheter this part fits the PC305TP. However, I decided to take a chance and ordered it anyway.

Verdict: It fits perfectly. No modifications, hammers, blow torches, or dynamite required.

Although I took 5 minutes to install the hood,I haven't had a chance to use it yet, and probably won't for a couple months. I gave it five stars because its currently rated 4.5 and I didn't want to negatively skew the ratings on a product I haven't fully tested. However, since I was having trouble finding credible information regarding Porter Cable compatibility, I thought others might be having the same issue. That said, I decided to post this review before actually trying the product. Hope this helps.

The 50-359 dust collector connector is fine, but the "recommended" Jet JW1044 4-to-2-1/2-Inch Reducer doesn't fit: The large end is 4" OD. To fit the 50-359 (which has a 4" OD connector), it should be 3.75" OD or 4" ID.

Pros: 1. Great concept. 2. Compact.

Cons: 1. Difficult installation--screw location poor, thanks to Delta. Dust port centered above planer outfeed. ..tough for any dust collection system other than overhead.

I'm sure it's a fine hood -- it's just that the documentation is lacking in this respect. I gave it one star in the hopes that my review will "pop up" for someone else with the 22-560 who's considering this purchase and (like me) couldn't find the correct documentation. After I spoke to the Delta/PC tech rep for the second time, she finally discovered that the dust collection assembly for the 22-560 originally was part number 50-445, but it has since been changed to 5140070-54. (It's NOT part #1342183 -- that's only the dust chute itself, without the rest of the assembly). It's not available on Amazon. Go to servicenet.deltaportercable.com and enter the new part number in the search field. You can order it from there. - Dust Collector Accessories - Planer - Benchtop Planers - Delta'


Detail Products
Detail Reviews
Click here for more information


Dust Collector Accessories - delta, benchtop planers dust collector accessories Dust Collector Accessories - delta, benchtop planers

Energy-saving Devices - kilowatt utilization, energy-saving devices


I absolutely love this thing.



Having recently moved out on my own, and generally just enjoying statistics in general, I bought this to monitor my electric costs after two high electric bills in a row. The various results I found were quite surprising.



My air purifier, which I bought here on Amazon, uses 85 watts all the time... 85 * 24 hrs * 30 days / 1000 watts = 61.2kWhr * $0.20 = $12.24 a month.



Well, that's quite a costly monthly addition I never thought of. And that's just the begining.



My Vornado fan uses 45w... my air conditioner, on high 6 (out of 12) spikes up to 1200 watts. Jeez.



My computer, at idle with external drives, uses about 250w. When doing extremely intensive things, like encoding a video, 310w.



My light behind my computer desk, with five, 10-watt bulbs, doesn't actually use 50-watts total. No, it uses 50-watts for the bulbs, PLUS 30-watts apparently just for the light unit to function.



You too will find out all these things you never knew, and possibly save money by cutting out, or replacing energy guzzlers.



The product is also made in China. Just like everything else now. P3 International P4400 Kill A Watt Electricity Usage Monitor

Two years ago, my electricity consumption jumped about 40% and I ignored the problem until this fall's rate increases. I wanted to find out what I bought back in 2003 that's still eating power today. Enter the P4400 Kill-A-Watt unit, which is the only low-cost product of its type on the market today. I tried but failed to find its specifications online. So I bought a couple of these things to try them out. Here are the details on what it can do.



* How big is the display: 4 digits.

* What are the front-panel button capabilities: volts, amps, watts, volt-amps, power-factor, frequency (hz), KWH, timer (since reset).

* Does it lose its data in a power failure: yes.

* You have to plug the unit into a nonswitched wall outlet, it can't measure overhead lighting or large appliances.

* It will report the amount of time (hours:min up to 99:59, then hours for about a year) since last reset but won't tell you how much of that time the attached device was powered on.



How did I figure out usage? I created an Excel spreadsheet with the following columns: Device, estimated wattage, estimated hours/month, kilowatts avg/month, measured kwh/day, measured kilowatts, annual cost. I went through the house and inventoried everything I could find, entering it into a row of the spreadsheet. Then I filled in the estimates:



- Hours/month: if I use a TV 3 hours a day, I enter the formula 3*365/12; if I use a treadmill 45 minutes on 10 days a month, the formula is 0.45*10*365/12.

- Kilowatts (average over the month): formula is watts*hours/(24*365/12)/1000. If you have a 60-watt light left on 24/7, you should see the value 0.060; if you have it on a 12-hour timer, you should see the value 0.030.

- Annual cost: formula is kilowatts*365*24*cost. Locally the cost is 13.5 cents so a 100-watt device works out to $118.26 per year.



OK once I have that chart I then plug in the Kill-A-Watt to measure the items that might be chewing up more power than my estimates. For a device that you leave on all the time and which uses a steady number of watts, you can simply measure it for a moment and enter the kwh/day figure into your spreadsheet quickly. For devices like refrigerators or computer monitors or TV sets, you will want to leave the unit plugged in anywhere from a day to a week before entering your kwh/day figure.



The first thing that leaped out at me was how much it costs to run those econo-box desktop PCs. Sure enough, the culprit turned out to be those hot AMD and Intel processors: the tech industry wants you to focus on gigahertz and other performance numbers; they'll never tell you how many watts the computer will draw--because no one asks, not even Consumer Reports. A modern desktop easily draws 100 watts: refer to my earlier figure to see how much that costs, a dollar amount bound to go up in the future. Laptops would save power (though not necessarily enough to make up for the purchase price). Turning off the PC when not in use would save money, but at the cost of productivity: if you value your time, you don't like waiting 2 minutes every time you want to check an email (add those 2 minutes up over the course of a year!)



Bottom line: the Kill-A-Watt device will focus your attention on some of the devices that are costing you unnecessary money, and will definitely change the questions you will be asking as you purchase future household devices. I'd like to see a more feature-laden version, but not if it makes the Kill-A-Watt cost much more than the $25 I paid.

I bought 4 of these altogether, and found them very useful for measuring electrical loads. However, 2 of them have failed -- the LCD display goes blank. Fortunately, the device is passive, so that attached appliances continue to run, but the information is lost. One of my failed P4400s was returned to Amazon for credit, but another one failed after Amazon's 30-day limit on returns. I wrote P3 International, but they never responded. Although I love the device, any manufacturer who doesn't respond to a customer inquiry like this gets an automatic 0 stars (1 in Amazon's system).



Update -- all 4 have now failed with the same symptoms. - Energy-saving Devices - Energy Savings - Kilowatt Utilization - Electric Meters'


Detail Products
Detail Reviews
Click here for more information


Energy-saving Devices - kilowatt utilization, energy-saving devices energy savings Energy-saving Devices - kilowatt utilization, energy-saving devices

Bicycle Accessories - indoor bike storage, bike storage


Easy to install, shipped quickly, solidly constructed. Attractive and simple bike hanging solution- product does what it claims.



The only reason I didn't give it "5 stars", was because I bought three of them and the two mounting screws were missing from one of them. It wasn't worth complaining about as they were 2 simple wood screws, but a minor annoyance.



FYI: This item is listed all over the internet at 2-3 times Amazon's price! Racor B-1R Solo Vertical Bike Rack

I looked at several similar products before I bought the Racor Solo Bike Racks. The Racor racks from Amazon were the least expensive. The white color of the ones I bought look the most unobtrusive in my apartment. Although the instructions say the racks must be mounted to a wall stud with included hardware, I mounted mine to sheetrock (wallboard) using two large moly bolts for each one. (Do this at your own risk.) My two racks have worked quite well at holding my fairly light road bike and my heavier commuter bike. I docked one star for fit and finish. otherwise, I'm happy.

Works perfectly. Strong. Attractive. But the foam pad on the hook is far from adequate. We installed 10 of these in a bike room, and on the 2nd or third time hanging a bike, the foam is torn on nearly all of them. It makes no sense to use such flimsy foam on an otherwise solid product. I'm going to fit lengths of rubber tubing over the hooks instead.

Great bike rack. Looks nice. I have it holding my mens 17.5" Trek mountain bike. I have it hanging above my cat liter box, so it's important to be high quality and so far it proves to be so. If I could change anything I would ask that the hook that holds the bike be a little bigger, so the gap would be wider to get my tire through the clearance to hang it. Not really a problem at all, it would just be more convenient. It's great to find a bike rack that holds mountain bikes...usually they are only made to fit road bikes. Word of advice....don't use the screws that came with it. Go to the hardware store and buy some expensive high quality wood screws...the kind that screw into the wood with a drill...without needing a pilot hole. It will make it a lot easier to get the screws into the studs. The studs are very dense wood and most screw heads will get stripped.





I took off the foam pad...it lasted about 5 minutes. It's not needed anyways...what matters is that the steel is high quality and will not bend. That is really the only thing that matters.



Update: After a few days, I am bumping this up to 5 stars. Really impressed...the hook has not bent or given in any way.

I have a 27" mountain bike from Target - nothing special - and had my boyfriend install the bike rack in my garage on a stud. I was skeptical at first because it just doesn't look that strong, but it has held just fine for about a month now. It still leaves tire tracks on the wall from the tire not hanging. No big deal if it's in the garage or on another undesireable wall.

The rack is sturdy, works and goes up with two screws. It is an average bike hanger. It would be nice if the rack had a bigger loop so a 29er mountain bike would be easier to hang and the hanger accommodated wide tires. I don't think the padding will last very long either.



Overall, it works well for 26 bikes unless your tires are 2.4 inches or wider. 2.2 inch wide tires are fine. I would not recommend it for 29er mountain bikes.

Works good with my road bike, easy to hook tire, On my Mountain bike its a different story, With a larger tire you have to really angle the wheel to get it to hook the tire and just as hard to get the wheel out. Protects the wheel fairly well.

18 February 2011: Racor B-1R Solo Vertical Bike Rack is designed for installation on walls with wood studs. The instructions are not too bad, but you need to locate wooden studs in you wall or install it on the wooden wall. The main problem is that mounting screws are cheap, strip easily and break-off. You need to buy Two stainless steel screws for this work or use common sheet rock screws, as I end up doing for installation. - Bike Storage - Bicycle Accessories - Cycling - Indoor Bike Storage'


Detail Products
Detail Reviews
Click here for more information


Bicycle Accessories - indoor bike storage, bike storage indoor bike storage Bicycle Accessories - indoor bike storage, bike storage

Wipe Off Boards - whiteboard, dry erase board


Boards are great quality and arrived quickly. Bonus: Each one came in its own ziplock bag so I was able to create kits for my students that included a dry erase marker and clip to turn whiteboard into a clipboard. Highly recommend this product! Chenille Kraft 9881-10 Chenille Kraft Student Dry-Erase Boards, Melamine, 12 x 9, White, 10-Pack

I expected 1 board, but this package gives you 10 boards. They are good quality for 2 dollars a piece, about the size of an average piece of paper. The dry erase marker (Expo low odor dry erase) seems to leave some faint residue marks after erasing.

I glued magnets to the backs of four of these boards. I have them stuck on my refrigerator: weeks priorities and to-do list, shopping list, the weeks menu plan and a place to jot down phone numbers, notes, messages etc. I really love them.

These boards are amazing. Although they do not have frames around the edges it actually works for better cleanup as there is never a buildup around the would be framed edges. Study and with a solid back, they hold up better then retail boards which usually have a back mad from cardboard. These feel more like clipboards with a dry erase surface.



Packaging was good as well. Since these boards are a lot more study then normal there was no need for a mass number of air pillows. Each board is individually encased in a plastic envelop to protect the surface from damage and all ten are enclosed in a larger plastic envelop.

Bought 30 for a fifth grade classoom. They are easy to clean with a smooth surface. Back side is brown, but useful as a clip board using clothes pins. They are thinner than some brands, yet feel solid. The edges are nicely rounded. We have only used them 3 times so far, hopefully they will last. - Dry Erase Board - Whiteboard - White Board - Dry Erase Boards'


Detail Products
Detail Reviews
Click here for more information


Wipe Off Boards - whiteboard, dry erase board dry erase boards Wipe Off Boards - whiteboard, dry erase board