Unlike a lot of CEs, Onkyo may have indavertantly cannibalized its own model lineup by pushing so much featureset into an entry level receiver that it might deter buyers from their higher end models. I recently did a thorough comparison of the Pioneer VSX-1020 and Denon AVR-791 and the Onkyo nudged out the Pioneer due to its beefier amp section and OSD capabilities. That said, I must caution users that its value is marred by what appears to be a bug with its ability to pass through HDMI video signals unmolested, even in "Through" modes. This bug manifests itself in two ways: 1. 24 bit sources (like cable hdtv) are upconverted to 30 bit when output on a display; AND 2. for some inexplicable reason, 1080p 24fps sources stutter intermittently as if a frame is dropped. The latter might be more noticeable to plasma owners whereas 120hz and 240hz LCDs might compensate for the frame stuttering with their interpolation software (ie the soap opera effect).
With that caveat, the Onkyo is a terrific performer offering strong power (power consumption is up from the 607 to a very grown up 756 watts), terrific flexibility (four speaker terminals can be assigned to wide, height or zone 2). The Denon is limited to merely 7 speaker terminals and the Pioneer has only a pair of assignable terminals. The Audyssey auto-callibration (2EQ) is a notch behind Denon, but the inclusion of Audyssey DSX (for wide arrangements) is a feature that the Denon does not offer. While it lacks the USB terminal for Ipod playback of the Pioneer and the Denon, it does offer a computer input which might resolve the HDMI handshake nightmare many face with htpcs.
Onkyo rather smartly included a fan atop of the receiver, which is silent and all but eliminates the historical Onkyo toaster oven effect.
I really enjoy this receiver, but found the HDMI video molestation issues to quite problematic and what mar an otherwise incredible buy. Hopefully Onkyo can issue a firmware update. Onkyo TX-SR608 7.2-Channel Home Theater Receiver (Black)
As others have said, the two 1 star reviews do not review this new Onkyo 608 (makes no sense to me).
Anyway, I absolutely love my new Onkyo 608. I never review stuff, but I wanted to give props to this receiver. I was debating between this one and the new Pioneer 1020. However, I've heard that the amps in the Pioneers don't compare to the amps in the Onkyos. Though I cannot verify the truth of this, I do believe that the amp in the Onkyo is of a very high quality. I have already noticed a tremendous amount of power increase over my previous Yamaha receiver (the model that was included with the Yamaha 390 HTIB). This puts out a lot more sound, and I absolutely love the ability to take advantage of HD audio. I noticed a huge fidelity difference in the compressed Dolby Digital track for Dark Knight and the Dolby True HD. The track was intended to include a lot of bass, and the HD includes all of it. The regular Dolby did not compare. Thus, HD audio is definitely worth having if you own a blu-ray player. Just like video quality (some transfers are better than others; aka reference quality), not all sound tracks will have a huge difference, but to me, it's still worth it. Back to the Onkyo: I love it. There are so many settings that you can tweak. If you like the ability to configure your equipment, you will love this receiver! You can also bi-amp with this receiver, which is nice if you don't have 7 speakers.
The Onkyo TX-SR608 is an amazing receiver for the cost. One of the best aspects of this receiver is the way it handles the volume control. First of all you can set the volume level that the receiver on turns on so you are not overwhelmed with a loud volume right away. Also you can set a maximum level so you don't accidentally turn the volume level too high. Audyssey Dynamic Volume is perfect when you don't want huge fluxuations in volume so that dialogue, music and surround effects don't drown each other out. This means you don't have to constantly turn volume up and down during a movie as it maintains a more consistant level of volume. In order to use Audyssey Dynamic Volume you MUST run Audyssey 2EQ Acoustic Room Correction first. Place included microphone on a cheap tripod for this; DO NOT HOLD IN YOUR HAND as I have read some have;this can have an adverse effect on sound output. Set the Dynamic Volume to the Compression Mode you want(Light, Medium, or Hesvy as Off is Default) set Re-EQ function to ON as well. The instruction manual is very detailed and easy to understand. Default setings are underlined in the instruction manual.
I really love Audyssey DSX it really gives a much fuller sound to the movie soundtrack. I use the front wide setup as opposed to the front height channels.
First and foremost, people that don't even own the "608" shouldn't even be posting here. Trying to compare the "608" that has a built in fan and the "606" that doesn't AND has the fact the "608" has 2x the amount of features is like apple and oranges. Enough said about that and onto a review by a person that actually owns the "608".... Pushes my polk audio speakers very very well (2 @ 70 monitors, 4 @ 50 monitors, 1 @ cs2 center, and powered psw505). Volume hardly goes past 1/2 way / 50,,, anymore and the neighbors start calling cops im sure.. Loads of options and can be tweeked untill you are blue in the face. Got sub set @ 80hz, front main 70's set @ 60hz, all 4 surround 50 speakers set @ 80hx THX, and cs2 center set @ 80hz THX. One really really nice thing about the onkyo 608 is how cool it is and stays @ room temp with the built in fan. I'm loving this receiver so far and would highly advise anyone to purchase without a 2nd thought. More receiver than I need with no need for seperate amp. - Hdmi - Onkyo - Thx - Receiver'
Detail Products
Detail Reviews
Click here for more information
