The wireless remote is nice, lightweight and easy to use. The only thing I wish it could do is work from behind or even from the side of the camera. You must be facing the camera to hit the infrared sensor with the remote. If that would be something you would like too, I would recommend the wired version. Canon RC-6 Wireless Remote Controller for Canon XT/XTi, XSi, T1i and T2i Digital SLR Cameras
I was skeptical while purchasing this remote if it would work with my Canon EOS 7D camera but then it worked perfectly fine. Addition of a pouch, which could be fixed to the Camera strap, was a pleasant surprise!!! A small hole on it's edge, can work as a keychain holder too!!! The remote works pretty much as a point and shoot!!!Canon EOS 7D 18 MP CMOS Digital SLR Camera with 3-inch LCD and 28-135mm f/3.5-5.6 IS USM Standard Zoom Lens
I just bought my Canon EOS Rebel T2i so I thought I would get this remote trip controller to add to my fun. When I first got it, I thought it didn't work, until I remembered that I hadn't set my camera under the Drive Move menu setting to Self-timer/Remote Control. Once I did this this remote worked like a charm.
This remote is far smaller than what I had expected. It is thinner than a pencil and is only a little bigger than my thumb. It also comes with a small, but fairly high quality, case. The remote doesn't do anything fancy other than send an IR signal to your camera as a shutter release. I wouldn't use this for long exposures (get the RS 60/80/TC80) for that. This remote has pretty impressive range too (it almost matches my pocket wizard, but line of sight is needed). For the most part, I use this for self-portraits and for photographing group shots that include me.
Although it doesn't say this in the description, this remote does work for the 7D (I use it). Just remember to set your camera to wireless mode under "Drive".
I received the RC-6 and am using it on my Canon T2i. It worked flawlessly from the get-go. Just point it at the front of the camera and fire! That 10 second mad dash is history! The RC-6 can be held at a low angle from perpendicular, and it still works. There is also a switch on the back of the remote that lets you change from instant action to a two second delay, if you wanted to have the remote concealed in the picture. This feature is very easy to use. Don't forget to change the "drive mode" from "single shooting" to "remote;" your camera manual will explain that, if needed. When you're done using the remote, you'll need to restore the original setting, otherwise you'll get an unwanted delay in your shutter release.
The RC-6 is very light weight, and smaller than I expected, but not in a negative way. Approximate dimensions are 2.5" tall, 1.25" wide, 0.1875" (3/16") thick (63mm X 32mm X 5mm). A few of the other reviewers said that the RC-6 was cheaply built, but I disagree with that assessment. Don't let the lack of weight fool you! Another point others made was the inability to use this remote from behind the camera while using a tripod. If you hold the remote with your right hand and point it toward yourself and in front of the camera's right side (next to the lens so that the IR signal will work on the camera, and so you don't get your hand or remote in the picture), you can trigger the shutter release while standing behind the camera. If you're using a shorter lens, you can always angle your remote hold position. This process is not as convenient as using the corded RS60-E3, for example, but it'll due in a pinch. It's a very nice remote and comes with a matched carrying case. You can't go wrong, and the price is right!
Works with the 7D, just set your drive mode to "self timer". Has a switch on the back that can be used to set the remote to instant shot or 2 second delay when in "stills" mode. During video recording setting 1 trips the shutter and setting 2 starts and stops the video recording.
Comes with a battery and a handy storage pouch that you can a-fix to your camera strap.
Indoors with a new battery, I have a measured 33 foot range from the front of the camera and 6 foot from behind. Maximum manual shutter release time is about 1.5 shots per second. In bulb mode, you press the remote once to open the shutter and again to close the shutter no need to "hold" the button.
The only real down side is you cannot do a "half press focus" with this remote. When you press the button you get instant focus and shutter release. This is not a big deal for portraits but might create some difficulties for macro or extreme zoom work where even the slightest touch of the on camera shutter might effect your cropping. I would most likely use a wired remote in those situations.
Overall a good remote but would be more versatile with "half press focus"
but... Despite being in the name of the product on Amazon, it does NOT work for the Canon EOS XS. I really hope they take that out of the title. Next time I'll read the product description from the manufacturer and not get over excited from the retailer description. - Camera Remote - Digital Camera Accessory - Canon Remote - Canon'
Detail Products
Detail Reviews
Click here for more information
